No scanning outgoing messages with amavisd-new 2.4x and exim 4.6x

Hi list,

I have activated amavisd-new/clamAV with exim 4.6x.
It works very good for incomming messages, but all
outgoing messages will not be scanned through amavisd.

My entries for exim.conf looks like written in the
docs:

[...]
local_interfaces = 0.0.0.0.25 : 127.0.0.1.10025

amavis_router:
  driver = manualroute
  condition = "${if eq {$interface_port}
}"
  domains = +virenscan_domains
  route_list = "* localhost byname"
  transport = amavis
  self = send

amavis:
  driver = smtp
  port = 10024
  allow_localhost
[...]

Is it correct, that outgoing messages will not be scanned
by amavisd-new ?
And what can I do, to scan all outgoing messages, too ?!


-- 
Regards,

     Jens Strohschnitter

-------------------------------------
*!!!LINUX LINUX LINUX LINUX LINUX!!!*
 
* http://www.jens-str
ohschnitter.de *
-------------------------------------
Set the controls for 
		 the heart of the sun
-------------------------------------
__________________________________________________________

Raiffeisen Waren-Zentrale Rhein-Main eG
50668 Koeln, Altenberger Str. 1a

Tel: 0221/1638-0
Fax: 0221/1638-254

Sitz: Koeln

Amtsgericht Koeln, GnR 728

Vorstand: 
Hans-Josef Hilgers (Sprecher)
Markus Stuettgen
Dr. Karl-Heinrich Suemmermann
Friedhelm Decker (Vorsitzender)
Ingo Steitz

Vorsitzender des Aufsichtsrates: 
Peter Bleser (MdB)

St.Nr.: 215/5938/0152

Bankverbindung:
WGZ Bank AG, Duesseldorf
(BLZ 300 600 10) Konto-Nr.: 300 011



------------------------------------------------------------
-------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and
take
control of your XML. No limits. Just data. Click to get it
now.
http://sourcefor
ge.net/powerbar/db2/
_______________________________________________
AMaViS-user mailing list
AMaViS-userlists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/amavis-user

AMaViS-FAQ:http://www.amav
is.org/amavis-faq.php3
AMaViS-HowTos:http://www.amavis.org/ho
wto/

Jens,

> I have activated amavisd-new/clamAV with exim 4.6x.
> It works very good for incomming messages, but all
> outgoing messages will not be scanned through amavisd.

There is a lack of Exim expertise on this mailing list.

> My entries for exim.conf looks like written in the
> docs:
>
> [...]
> local_interfaces = 0.0.0.0.25 : 127.0.0.1.10025
>
> amavis_router:
>   driver = manualroute
>   condition = "${if eq {$interface_port}
}"
>   domains = +virenscan_domains
>   route_list = "* localhost byname"
>   transport = amavis
>   self = send
>
> amavis:
>   driver = smtp
>   port = 10024
>   allow_localhost
> [...]
>
> Is it correct, that outgoing messages will not be
scanned
> by amavisd-new ?
> And what can I do, to scan all outgoing messages, too
?!

See README.exim_v4*. The following caught my eye:


        # if scanning incoming mails, uncomment the
following line and
        # change local_domains accordingly
        # domains = +local_domains

  (from Patrice Fournier): This router must be the first
router
    if you want to scan all mail. If you only want to scan
mail destined
    to local domains, you either add a "Domain =
local_domains" line to it
    or put it after your remote_smtp router.



Mark

------------------------------------------------------------
-------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and
take
control of your XML. No limits. Just data. Click to get it
now.
http://sourcefor
ge.net/powerbar/db2/
_______________________________________________
AMaViS-user mailing list
AMaViS-userlists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/amavis-user

AMaViS-FAQ:http://www.amav
is.org/amavis-faq.php3
AMaViS-HowTos:http://www.amavis.org/ho
wto/