(!!)TROUBLE in child_init_hook: BDB no dbS: Lock table is out of available locker entr

Does anybody has any way to fix this,  this is common now at
my server:

(!!)TROUBLE in child_init_hook: BDB no dbS: Lock table is
out of available 
locker entries, . at (eval 38) line 30.


Regards

LD

------------------------------------------------------------
-------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
AMaViS-user mailing list
AMaViS-userlists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/amavis-user

AMaViS-FAQ:http://www.amav
is.org/amavis-faq.php3
AMaViS-HowTos:http://www.amavis.org/ho
wto/

Luis Daniel,

> Does anybody has any way to fix this, this is common
now at my server:
>
> (!!)TROUBLE in child_init_hook: BDB no dbS: Lock table
is out of available
> locker entries, . at (eval 38) line 30.

Does amavisd-nanny report any crashed processes ('went
away...') ?
If yes, the fix is to upgrade amavisd to 2.5.4-rc1 (or
manually
apply a fix to 2.5.3 I posted about a week ago).

If the answer is no, then see the posting on the matter from
a
last week or two on this ML. In short, using recent
maintenance
versions of berkeley db (4.3.29 or 4.4.20, or later) may
help.

  Mark

------------------------------------------------------------
-------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
AMaViS-user mailing list
AMaViS-userlists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/amavis-user

AMaViS-FAQ:http://www.amav
is.org/amavis-faq.php3
AMaViS-HowTos:http://www.amavis.org/ho
wto/

I'm using 4.2.52 that is shipped with Mandriva 2007.1

Le Friday 07 March 2008 11:41:02 Mark Martinec, vous avez
écrit :
> Luis Daniel,
>
> > Does anybody has any way to fix this, this is
common now at my server:
> >
> > (!!)TROUBLE in child_init_hook: BDB no dbS: Lock
table is out of
> > available locker entries, . at (eval 38) line 30.
>
> Does amavisd-nanny report any crashed processes ('went
away...') ?
> If yes, the fix is to upgrade amavisd to 2.5.4-rc1 (or
manually
> apply a fix to 2.5.3 I posted about a week ago).
>
> If the answer is no, then see the posting on the matter
from a
> last week or two on this ML. In short, using recent
maintenance
> versions of berkeley db (4.3.29 or 4.4.20, or later)
may help.
>
>   Mark
>
>
------------------------------------------------------------
-------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> AMaViS-user mailing list
> AMaViS-userlists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/amavis-user

> AMaViS-FAQ:http://www.amav
is.org/amavis-faq.php3
> AMaViS-HowTos:http://www.amavis.org/ho
wto/



------------------------------------------------------------
-------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
AMaViS-user mailing list
AMaViS-userlists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/amavis-user

AMaViS-FAQ:http://www.amav
is.org/amavis-faq.php3
AMaViS-HowTos:http://www.amavis.org/ho
wto/

I got


[rootbrandmauer virusmails]# amavisd-nanny
process-id task-id     elapsed in    elapsed-bar (dots
indicate idle)
           or state   idle or busy
BDB no env: No such file or directory No such file or
directory 
at /usr/sbin/amavisd-nanny line 119.
exited
[rootbrandmauer virusmails]# 

Le Friday 07 March 2008 11:41:02 Mark Martinec, vous avez
écrit :
> Luis Daniel,
>
> > Does anybody has any way to fix this, this is
common now at my server:
> >
> > (!!)TROUBLE in child_init_hook: BDB no dbS: Lock
table is out of
> > available locker entries, . at (eval 38) line 30.
>
> Does amavisd-nanny report any crashed processes ('went
away...') ?
> If yes, the fix is to upgrade amavisd to 2.5.4-rc1 (or
manually
> apply a fix to 2.5.3 I posted about a week ago).
>
> If the answer is no, then see the posting on the matter
from a
> last week or two on this ML. In short, using recent
maintenance
> versions of berkeley db (4.3.29 or 4.4.20, or later)
may help.
>
>   Mark
>
>
------------------------------------------------------------
-------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> AMaViS-user mailing list
> AMaViS-userlists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/amavis-user

> AMaViS-FAQ:http://www.amav
is.org/amavis-faq.php3
> AMaViS-HowTos:http://www.amavis.org/ho
wto/



------------------------------------------------------------
-------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
AMaViS-user mailing list
AMaViS-userlists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/amavis-user

AMaViS-FAQ:http://www.amav
is.org/amavis-faq.php3
AMaViS-HowTos:http://www.amavis.org/ho
wto/

Luis Daniel,

> I got
>   # amavisd-nanny
> BDB no env: No such file or directory No such file or
directory
> at /usr/sbin/amavisd-nanny line 119.
> exited

The amavisd daemon maintains its nanny database in a
directory
which is configured in your $db_home (in amavisd.conf),
the default is "$MYHOME/db". Check for existence
of a file
nanny.db in this directory, while amavisd is running.

You may need to modify amavisd-nanny to look for this
database
in the same location (variable $db_home, somewhere close to
the
beginning of /usr/sbin/amavisd-nanny).

Running amavisd-nanny interactively every once in a while
is a quick way to monitor health of your amavisd setup.
If there were any crashed processes (after amavisd start)
since the last time amavisd-new ran, they will be reported.


> I'm using 4.2.52 that is shipped with Mandriva 2007.1

Replace your file 'amavisd' with the one from 2.5.4-rc1
to be on the safe side. There shouldn't be any
compatibility
issues between 2.5.2, 2.5.3, and 2.5.4.

A couple of people have reported mail messages with a
wildly
broken header causing perl regular expressions to crash,
which is a reason for unclean shutdowns of berkeley
databases,
which eventually run out of resources. The 2.5.4-rc1 should
fix
these known problems. If there are any remaining
locking/resource
problems with libdb, you may need to look into upgrading
it.

  Mark

------------------------------------------------------------
-------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
AMaViS-user mailing list
AMaViS-userlists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/amavis-user

AMaViS-FAQ:http://www.amav
is.org/amavis-faq.php3
AMaViS-HowTos:http://www.amavis.org/ho
wto/

Ok,
where is 2.5.4-rc1, there is not a homepage

Le Friday 07 March 2008 13:39:54 Mark Martinec, vous avez
écrit :
> Luis Daniel,
>
> > I got
> >   # amavisd-nanny
> > BDB no env: No such file or directory No such file
or directory
> > at /usr/sbin/amavisd-nanny line 119.
> > exited
>
> The amavisd daemon maintains its nanny database in a
directory
> which is configured in your $db_home (in
amavisd.conf),
> the default is "$MYHOME/db". Check for
existence of a file
> nanny.db in this directory, while amavisd is running.
>
> You may need to modify amavisd-nanny to look for this
database
> in the same location (variable $db_home, somewhere
close to the
> beginning of /usr/sbin/amavisd-nanny).
>
> Running amavisd-nanny interactively every once in a
while
> is a quick way to monitor health of your amavisd
setup.
> If there were any crashed processes (after amavisd
start)
> since the last time amavisd-new ran, they will be
reported.
>
> > I'm using 4.2.52 that is shipped with Mandriva
2007.1
>
> Replace your file 'amavisd' with the one from
2.5.4-rc1
> to be on the safe side. There shouldn't be any
compatibility
> issues between 2.5.2, 2.5.3, and 2.5.4.
>
> A couple of people have reported mail messages with a
wildly
> broken header causing perl regular expressions to
crash,
> which is a reason for unclean shutdowns of berkeley
databases,
> which eventually run out of resources. The 2.5.4-rc1
should fix
> these known problems. If there are any remaining
locking/resource
> problems with libdb, you may need to look into
upgrading it.
>
>   Mark
>
>
------------------------------------------------------------
-------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> AMaViS-user mailing list
> AMaViS-userlists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/amavis-user

> AMaViS-FAQ:http://www.amav
is.org/amavis-faq.php3
> AMaViS-HowTos:http://www.amavis.org/ho
wto/



------------------------------------------------------------
-------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
AMaViS-user mailing list
AMaViS-userlists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/amavis-user

AMaViS-FAQ:http://www.amav
is.org/amavis-faq.php3
AMaViS-HowTos:http://www.amavis.org/ho
wto/

Luis Daniel,

> where is 2.5.4-rc1, there is not a homepage

On a home page, under 'News' section:
  http://www.ijs.si
/software/amavisd/

Mark

------------------------------------------------------------
-------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
AMaViS-user mailing list
AMaViS-userlists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/amavis-user

AMaViS-FAQ:http://www.amav
is.org/amavis-faq.php3
AMaViS-HowTos:http://www.amavis.org/ho
wto/

On Friday 07 March 2008 17:25, Luis Daniel Lucio Quiroz
wrote:
> Does anybody has any way to fix this,  this is common
now at my server:
>
> (!!)TROUBLE in child_init_hook: BDB no dbS: Lock table
is out of available
> locker entries, . at (eval 38) line 30.

FYI:
After an upgrade of BerkeleyDB (perl modul) from 0.26 to
0.33 I get the same 
errors. 

Greetings
Stefan

------------------------------------------------------------
-------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
AMaViS-user mailing list
AMaViS-userlists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/amavis-user

AMaViS-FAQ:http://www.amav
is.org/amavis-faq.php3
AMaViS-HowTos:http://www.amavis.org/ho
wto/

Stefan,

> On Friday 07 March 2008 17:25, Luis Daniel Lucio Quiroz
wrote:
> > Does anybody has any way to fix this,  this is
common now at my server:
> > (!!)TROUBLE in child_init_hook: BDB no dbS: Lock
table is out of
> > available locker entries, . at (eval 38) line 30.
>
> FYI:
> After an upgrade of BerkeleyDB (perl modul) from 0.26
to 0.33 I get the
> same errors.

A version of BerkeleyDB perl module is rarely a problem, as
long as
it was installed with the same version of libdb (berkeley db
library)
that is currently on the system (i.e. the BerkeleyDB perl
module should 
preferably be reinstalled after upgrades to libdb).

But first of all, you need to rule out the possibility that
there were any process crashes. To repeat myself:

| Does amavisd-nanny report any crashed processes ('went
away...') ?
| If yes, the fix is to upgrade amavisd to 2.5.4-rc1 (or
manually
| apply a fix to 2.5.3 I posted about a week ago).
|
| If the answer is no, then see the posting on the matter
from a
| last week or two on this ML. In short, using recent
maintenance
| versions of berkeley db (4.3.29 or 4.4.20, or later) may
help.

  Mark

------------------------------------------------------------
-------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
AMaViS-user mailing list
AMaViS-userlists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/amavis-user

AMaViS-FAQ:http://www.amav
is.org/amavis-faq.php3
AMaViS-HowTos:http://www.amavis.org/ho
wto/

On Monday 10 March 2008 14:40, Mark Martinec wrote:
> Stefan,
>
> > On Friday 07 March 2008 17:25, Luis Daniel Lucio
Quiroz wrote:
> > > Does anybody has any way to fix this,  this
is common now at my server:
> > > (!!)TROUBLE in child_init_hook: BDB no dbS:
Lock table is out of
> > > available locker entries, . at (eval 38) line
30.
> >
> > FYI:
> > After an upgrade of BerkeleyDB (perl modul) from
0.26 to 0.33 I get the
> > same errors.
>
> A version of BerkeleyDB perl module is rarely a
problem, as long as
> it was installed with the same version of libdb
(berkeley db library)
> that is currently on the system (i.e. the BerkeleyDB
perl module should
> preferably be reinstalled after upgrades to libdb).

I upgraded only the BDB Perl Modul not the libdb.

> But first of all, you need to rule out the possibility
that
>
> there were any process crashes. To repeat myself:
> | Does amavisd-nanny report any crashed processes
('went away...') ?
> | If yes, the fix is to upgrade amavisd to 2.5.4-rc1
(or manually
> | apply a fix to 2.5.3 I posted about a week ago).

Yes, it did. And I installed the new amavisd version after I
realised the 
errors.
I have four equal configured servers and on one of them I
upgraded a couple of 
Perl modules. And only that server showed the errors. That's
why I thought it 
may be related to the BDB Perl Modul upgrade.

> | If the answer is no, then see the posting on the
matter from a
> | last week or two on this ML. In short, using recent
maintenance
> | versions of berkeley db (4.3.29 or 4.4.20, or later)
may help.
>
>   Mark

Greetings
Stefan

------------------------------------------------------------
-------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
AMaViS-user mailing list
AMaViS-userlists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/amavis-user

AMaViS-FAQ:http://www.amav
is.org/amavis-faq.php3
AMaViS-HowTos:http://www.amavis.org/ho
wto/