Re: Ipaq h63xx support ?

Hi.

I've been testing a bit more...

Olivier Berger <obergerouvaton.org> writes:

> Koen Kooi <koendominion.kabel.utwente.nl> writes:
>
>> Have you checked http://www.angstrom-distribution.org/unstable/images/
h6300/ ?
>>
>
> Not yet actually... due to the fact that there was no
zImage there
> when I checked... so I recompiled the whole thing.
>

Oh, there was no image in the directory on the server, but
of course
there was one in the .tar.gz image of the filesystem, in
boot/zImage-2.6.16.16-omap1-h6300 

> Anyway, I have to do more precise testing.
>
> Will try and summarize when I'm done (probably in a
week now, leaving
> my devices for a short week of vacation off the net ;)
>

I've tried and boot the
Angstrom-console-image-test-20070401-h6300.rootfs.tar.gz
image, but
unfortunately, the init script doesn't seem to run very
far...

The last messages I get (copied manually) are :
NET: Registered protocol family 17
MMC1: Command timeout, CMD0
mmcblk0: p1 p2
Bridge firewalling registered
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 116K

... then it seems the be hung... nothing more...

Unless I connect the USB craddle to my host and get :
udc: USB reset done, gadget ether
udc: USB reset done, gadget ether
udc: USB reset done, gadget ether
usb0: full speed config #1: 100 mA, Ethernet Gadget, using
CDC
Ethernet

... so it seems tp be alive but nothing happens...

Is it a success ?

I'd be glad to have a login prompt on the console ;)...

Will try with the X11 image.

Best regards,

-- 
Olivier BERGER (OpenPGP: 1024D/B4C5F37F)
APRIL (http://www.april.org) - Vive
python (http://www.python.org)
Pétition contre les brevets logiciels : http://petition.eurolin
ux.org

_______________________________________________
Angstrom-distro-devel mailing list
Angstrom-distro-devellinuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mail
man/listinfo/angstrom-distro-devel

Hi.

I'm the owner of a Ipaq h6340 (aka h6315) device.

I'd be willing to test its support of Angstrom...

Any idea if this would work ?

I've seen that there's a h6300 machine rules... so there's
definitely
some hope ;)

Best regards,
-- 
Olivier BERGER (OpenPGP: 1024D/B4C5F37F)
APRIL (http://www.april.org) - Vive
python (http://www.python.org)
Pétition contre les brevets logiciels : http://petition.eurolin
ux.org

_______________________________________________
Angstrom-distro-devel mailing list
Angstrom-distro-devellinuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mail
man/listinfo/angstrom-distro-devel

Olivier Berger <obergerouvaton.org> writes:

> Hi.
>
> I'm the owner of a Ipaq h6340 (aka h6315) device.
>
> I'd be willing to test its support of Angstrom...
>
> Any idea if this would work ?
>
> I've seen that there's a h6300 machine rules... so
there's definitely
> some hope ;)
>

For those interested, I tried and report my first results
in
h
ttp://www.linuxtogo.org/gowiki/AngstromOnIpaqH63xx

Not much interesting results yet... but I have to start over
and
review some details.

Best regards,

-- 
Olivier BERGER (OpenPGP: 1024D/B4C5F37F)
APRIL (http://www.april.org) - Vive
python (http://www.python.org)
Pétition contre les brevets logiciels : http://petition.eurolin
ux.org

_______________________________________________
Angstrom-distro-devel mailing list
Angstrom-distro-devellinuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mail
man/listinfo/angstrom-distro-devel

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Olivier Berger schreef:
> Hi.
> 
> I'm the owner of a Ipaq h6340 (aka h6315) device.
> 
> I'd be willing to test its support of Angstrom...
> 
> Any idea if this would work ?
> 
> I've seen that there's a h6300 machine rules... so
there's definitely
> some hope ;)

Have you checked http://www.angstrom-distribution.org/unstable/images/
h6300/ ?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)

iD8DBQFGIQpFMkyGM64RGpERArmoAKCZrV2rc+j/SfEAmjuBbWF+IIomtACf
Tv3d
j8t3Xl/dCJSWdmNFko/ZO00=
=Tr54
-----END PGP SIGNATURE-----

_______________________________________________
Angstrom-distro-devel mailing list
Angstrom-distro-devellinuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mail
man/listinfo/angstrom-distro-devel

Koen Kooi <koendominion.kabel.utwente.nl> writes:

> Olivier Berger schreef:
>> Hi.
>> 
>> I'm the owner of a Ipaq h6340 (aka h6315) device.
>> 
>> I'd be willing to test its support of Angstrom...
>> 
>> Any idea if this would work ?
>> 
>> I've seen that there's a h6300 machine rules... so
there's definitely
>> some hope ;)
>
> Have you checked http://www.angstrom-distribution.org/unstable/images/
h6300/ ?
>

Not yet actually... due to the fact that there was no zImage
there
when I checked... so I recompiled the whole thing.

Anyway, I have to do more precise testing.

Will try and summarize when I'm done (probably in a week
now, leaving
my devices for a short week of vacation off the net ;)

Regards,
-- 
Olivier BERGER (OpenPGP: 1024D/B4C5F37F)
APRIL (http://www.april.org) - Vive
python (http://www.python.org)
Pétition contre les brevets logiciels : http://petition.eurolin
ux.org

_______________________________________________
Angstrom-distro-devel mailing list
Angstrom-distro-devellinuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mail
man/listinfo/angstrom-distro-devel