pb with ant 1.7 and the svn source distrib

I 'd appreciate any hint to manage to install this
correctly

In the process to try to have beehive working with ant 1.7 I
try to  
compile beehive from the source distrib
available through svn:

svn checkout https:
//svn.apache.org/repos/asf/beehive/trunk

then I follow the process described in
http://svn.apache.org/repos/asf/beehive/trunk/BUILDING
.txt

evry thing is ok till
ant clean deploy

/beehive-imports.xml:346: Newer Ant required.

Building the project required Apache Ant 1.6.

You are currently using the following apache-ant:

ant.home    = /sw/lib/ant
ant.version = ${ant.version}

You may obtain a newer version of ant from

http://ant.apache.org/

If you have Ant 1.6 installed on your system, you may need
to
adjust your ANT_HOME environment variable.

while
$ ant -version
Apache Ant version 1.7.0 compiled on September 7 2007
$which ant
/sw/bin/ant
$ echo $ANT_HOME
/sw/lib/ant


Many thanks in advance
Vincent Poirriez



************************************************************
********
Enseignant-Chercheur HDR,
GR "RO Informatique"
Laboratoire d'Automatique, de Mécanique et d'Informatique,
industrielles et Humaines (LAMIH - UMR CNRS 8530)

************************************************************
********
Attachments:
    MIME accepted
    Word deprecated, http://ww
w.rfc1149.net/documents/whynotword
************************************************************
********

Adresse Postale:
UVHC - Le Mont Houy
59313 Valenciennes cedex 9 - FRANCE

tel:: (33)3.27.51.19.53 - Fax: (33)3.27.51.19.40
skype: vincent.poirriez
courriel:  vincent POINT poirriez AT univ-valenciennes.fr
http://w
ww.univ-valenciennes.fr/ROI/poirriez
************************************************************
********

Searching where is the pb, I cut and past the verification
of the  
ant.version from
beehive_imports.xml to build xml and it runs as a charm ??
till the  
following pb:

ant clean deploy
[..]
BUILD FAILED
/Users/poirriez/Library/Apache/beehive/trunk/build.xml:44:
The  
following error occurred while executing this line:
/Users/poirriez/Library/Apache/beehive/trunk/docs/build.xml:
27: The  
following error occurred while executing this line:
/Users/poirriez/Library/Apache/beehive/trunk/docs/forrest/bu
ild.xml: 
35: Cannot find ${os.FORREST_HOME}/main/forrest.build.xml
imported  
from
/Users/poirriez/Library/Apache/beehive/trunk/docs/forrest/bu
ild.xml


Le 7 sept. 07 à 18:39, vincent poirriez a écrit :

> I 'd appreciate any hint to manage to install this
correctly
>
> In the process to try to have beehive working with ant
1.7 I try to  
> compile beehive from the source distrib
> available through svn:
>
> svn checkout https:
//svn.apache.org/repos/asf/beehive/trunk
>
> then I follow the process described in
> http://svn.apache.org/repos/asf/beehive/trunk/BUILDING
.txt
>
> evry thing is ok till
> ant clean deploy
>
> /beehive-imports.xml:346: Newer Ant required.
>
> Building the project required Apache Ant 1.6.
>
> You are currently using the following apache-ant:
>
> ant.home    = /sw/lib/ant
> ant.version = ${ant.version}
>
> You may obtain a newer version of ant from
>
> http://ant.apache.org/
>
> If you have Ant 1.6 installed on your system, you may
need to
> adjust your ANT_HOME environment variable.
>
> while
> $ ant -version
> Apache Ant version 1.7.0 compiled on September 7 2007
> $which ant
> /sw/bin/ant
> $ echo $ANT_HOME
> /sw/lib/ant
>
>
> Many thanks in advance
> Vincent Poirriez
>
>
>
>
************************************************************
********
> Enseignant-Chercheur HDR,
> GR "RO Informatique"
> Laboratoire d'Automatique, de Mécanique et
d'Informatique,
> industrielles et Humaines (LAMIH - UMR CNRS 8530)
>
>
************************************************************
********
> Attachments:
>    MIME accepted
>    Word deprecated, http://ww
w.rfc1149.net/documents/whynotword
>
************************************************************
********
>
> Adresse Postale:
> UVHC - Le Mont Houy
> 59313 Valenciennes cedex 9 - FRANCE
>
> tel:: (33)3.27.51.19.53 - Fax: (33)3.27.51.19.40
> skype: vincent.poirriez
> courriel:  vincent POINT poirriez AT
univ-valenciennes.fr
> http://w
ww.univ-valenciennes.fr/ROI/poirriez
>
************************************************************
********
>
>
>
>
>
> -- 
> Ce message a été vérifié par MailScanner
> pour des virus ou des polluriels et rien de
> suspect n'a été trouvé.
>
>

Hi Vincent,
The steps to build using Ant 1.7 are different than those in
the
BUILDING.txt file as the project does not appear to have
upgraded yet.
To build using 1.7 try the info on the wiki.

http://wiki.apache.org/beehive/Beehive_and_Ant_1%2e7
Hope this helps,
-Jacob Danner

On 9/7/07, vincent poirriez <vincent.poirriezuniv-valenciennes.fr> wrote:
> I 'd appreciate any hint to manage to install this
correctly
>
> In the process to try to have beehive working with ant
1.7 I try to
> compile beehive from the source distrib
> available through svn:
>
> svn checkout https:
//svn.apache.org/repos/asf/beehive/trunk
>
> then I follow the process described in
> http://svn.apache.org/repos/asf/beehive/trunk/BUILDING
.txt
>
> evry thing is ok till
> ant clean deploy
>
> /beehive-imports.xml:346: Newer Ant required.
>
> Building the project required Apache Ant 1.6.
>
> You are currently using the following apache-ant:
>
> ant.home    = /sw/lib/ant
> ant.version = ${ant.version}
>
> You may obtain a newer version of ant from
>
> http://ant.apache.org/
>
> If you have Ant 1.6 installed on your system, you may
need to
> adjust your ANT_HOME environment variable.
>
> while
> $ ant -version
> Apache Ant version 1.7.0 compiled on September 7 2007
> $which ant
> /sw/bin/ant
> $ echo $ANT_HOME
> /sw/lib/ant
>
>
> Many thanks in advance
> Vincent Poirriez
>
>
>
>
************************************************************
********
> Enseignant-Chercheur HDR,
> GR "RO Informatique"
> Laboratoire d'Automatique, de Mécanique et
d'Informatique,
> industrielles et Humaines (LAMIH - UMR CNRS 8530)
>
>
************************************************************
********
> Attachments:
>     MIME accepted
>     Word deprecated, http://ww
w.rfc1149.net/documents/whynotword
>
************************************************************
********
>
> Adresse Postale:
> UVHC - Le Mont Houy
> 59313 Valenciennes cedex 9 - FRANCE
>
> tel:: (33)3.27.51.19.53 - Fax: (33)3.27.51.19.40
> skype: vincent.poirriez
> courriel:  vincent POINT poirriez AT
univ-valenciennes.fr
> http://w
ww.univ-valenciennes.fr/ROI/poirriez
>
************************************************************
********
>
>
>
>
>

Apache Forrest is needed for the documentation to build. You
can
further verify your environment setup with the 'bootstrap'
and
'check.setup' targets.
Best of  Luck,
-Jacob Danner

On 9/7/07, vincent poirriez <vincent.poirriezuniv-valenciennes.fr> wrote:
> Searching where is the pb, I cut and past the
verification of the
> ant.version from
> beehive_imports.xml to build xml and it runs as a charm
?? till the
> following pb:
>
> ant clean deploy
> [..]
> BUILD FAILED
>
/Users/poirriez/Library/Apache/beehive/trunk/build.xml:44:
The
> following error occurred while executing this line:
>
/Users/poirriez/Library/Apache/beehive/trunk/docs/build.xml:
27: The
> following error occurred while executing this line:
>
/Users/poirriez/Library/Apache/beehive/trunk/docs/forrest/bu
ild.xml:
> 35: Cannot find
${os.FORREST_HOME}/main/forrest.build.xml imported
> from
/Users/poirriez/Library/Apache/beehive/trunk/docs/forrest/bu
ild.xml
>
>
> Le 7 sept. 07 à 18:39, vincent poirriez a écrit :
>
> > I 'd appreciate any hint to manage to install this
correctly
> >
> > In the process to try to have beehive working with
ant 1.7 I try to
> > compile beehive from the source distrib
> > available through svn:
> >
> > svn checkout https:
//svn.apache.org/repos/asf/beehive/trunk
> >
> > then I follow the process described in
> > http://svn.apache.org/repos/asf/beehive/trunk/BUILDING
.txt
> >
> > evry thing is ok till
> > ant clean deploy
> >
> > /beehive-imports.xml:346: Newer Ant required.
> >
> > Building the project required Apache Ant 1.6.
> >
> > You are currently using the following apache-ant:
> >
> > ant.home    = /sw/lib/ant
> > ant.version = ${ant.version}
> >
> > You may obtain a newer version of ant from
> >
> > http://ant.apache.org/
> >
> > If you have Ant 1.6 installed on your system, you
may need to
> > adjust your ANT_HOME environment variable.
> >
> > while
> > $ ant -version
> > Apache Ant version 1.7.0 compiled on September 7
2007
> > $which ant
> > /sw/bin/ant
> > $ echo $ANT_HOME
> > /sw/lib/ant
> >
> >
> > Many thanks in advance
> > Vincent Poirriez
> >
> >
> >
> >
************************************************************
********
> > Enseignant-Chercheur HDR,
> > GR "RO Informatique"
> > Laboratoire d'Automatique, de Mécanique et
d'Informatique,
> > industrielles et Humaines (LAMIH - UMR CNRS 8530)
> >
> >
************************************************************
********
> > Attachments:
> >    MIME accepted
> >    Word deprecated, http://ww
w.rfc1149.net/documents/whynotword
> >
************************************************************
********
> >
> > Adresse Postale:
> > UVHC - Le Mont Houy
> > 59313 Valenciennes cedex 9 - FRANCE
> >
> > tel:: (33)3.27.51.19.53 - Fax: (33)3.27.51.19.40
> > skype: vincent.poirriez
> > courriel:  vincent POINT poirriez AT
univ-valenciennes.fr
> > http://w
ww.univ-valenciennes.fr/ROI/poirriez
> >
************************************************************
********
> >
> >
> >
> >
> >
> > --
> > Ce message a été vérifié par MailScanner
> > pour des virus ou des polluriels et rien de
> > suspect n'a été trouvé.
> >
> >
>
>

Thanks for the rapid answer, but it does not work

  the given link is not to build beehive, it s to use the
beehive  
binary distribution with ant 1.7

  I have tried that before, but it does not answer the pb as
some  
code in ant/beehive-tools.xml is buggy
(namely the macro build-webservices)

So it should be possible to build beehive from scratch and
with a  
fresh installation of the tools.

Vincent

Le 7 sept. 07 à 19:00, Jacob Danner a écrit :

> Hi Vincent,
> The steps to build using Ant 1.7 are different than
those in the
> BUILDING.txt file as the project does not appear to
have upgraded yet.
> To build using 1.7 try the info on the wiki.
> 
http://wiki.apache.org/beehive/Beehive_and_Ant_1%2e7
> Hope this helps,
> -Jacob Danner
>
> On 9/7/07, vincent poirriez <vincent.poirriezuniv-valenciennes.fr>  
> wrote:
>> I 'd appreciate any hint to manage to install this
correctly
>>
>> In the process to try to have beehive working with
ant 1.7 I try to
>> compile beehive from the source distrib
>> available through svn:
>>
>> svn checkout https:
//svn.apache.org/repos/asf/beehive/trunk
>>
>> then I follow the process described in
>> http://svn.apache.org/repos/asf/beehive/trunk/BUILDING
.txt
>>
>> evry thing is ok till
>> ant clean deploy
>>
>> /beehive-imports.xml:346: Newer Ant required.
>>
>> Building the project required Apache Ant 1.6.
>>
>> You are currently using the following apache-ant:
>>
>> ant.home    = /sw/lib/ant
>> ant.version = ${ant.version}
>>
>> You may obtain a newer version of ant from
>>
>> http://ant.apache.org/
>>
>> If you have Ant 1.6 installed on your system, you
may need to
>> adjust your ANT_HOME environment variable.
>>
>> while
>> $ ant -version
>> Apache Ant version 1.7.0 compiled on September 7
2007
>> $which ant
>> /sw/bin/ant
>> $ echo $ANT_HOME
>> /sw/lib/ant
>>
>>
>> Many thanks in advance
>> Vincent Poirriez
>>
>>
>>
>>
************************************************************
********
>> Enseignant-Chercheur HDR,
>> GR "RO Informatique"
>> Laboratoire d'Automatique, de Mécanique et
d'Informatique,
>> industrielles et Humaines (LAMIH - UMR CNRS 8530)
>>
>>
************************************************************
********
>> Attachments:
>>     MIME accepted
>>     Word deprecated, http://ww
w.rfc1149.net/documents/whynotword
>>
************************************************************
********
>>
>> Adresse Postale:
>> UVHC - Le Mont Houy
>> 59313 Valenciennes cedex 9 - FRANCE
>>
>> tel:: (33)3.27.51.19.53 - Fax: (33)3.27.51.19.40
>> skype: vincent.poirriez
>> courriel:  vincent POINT poirriez AT
univ-valenciennes.fr
>> http://w
ww.univ-valenciennes.fr/ROI/poirriez
>>
************************************************************
********
>>
>>
>>
>>
>>
>
> -- 
> Ce message a été vérifié par MailScanner
> pour des virus ou des polluriels et rien de
> suspect n'a été trouvé.
>
>

Le 7 sept. 07 à 19:02, Jacob Danner a écrit :

> Apache Forrest is needed for the documentation to
build. You can
> further verify your environment setup with the
'bootstrap' and
> 'check.setup' targets.

OK, i'll install it but (just to precise it is not checked)
$> ant check.setup
Buildfile: build.xml

check.setup:
      [echo]
      [echo] java.home       = /System/Library/Frameworks/ 
JavaVM.framework/Versions/1.5.0/Home
      [echo] ant.home        = /sw/lib/ant
      [echo] ant.version     = Apache Ant version 1.7.0
compiled on  
September 7 2007
      [echo] beehive.home    =
/Users/poirriez/Library/Apache/beehive/ 
trunk
      [echo] beehive.version = 1.1-SNAPSHOT
      [echo] ant.version.ok = true
      [echo]
      [echo] JSR 173 is installed correctly as
/Users/poirriez/ 
Library/Apache/beehive/trunk/installed/jsr173/jsr173_1.0_api
.jar
      [echo] junit.jar appears to be available since the
class  
"junit.framework.TestCase" was successfully
loaded
      [echo] Tomcat appears to be available in
/Users/poirriez/ 
Library/Apache/apache-tomcat-6.0.14/build
      [echo] manager role appears to be defined in
/Users/poirriez/ 
Library/Apache/apache-tomcat-6.0.14/build/conf/tomcat-users.
xml

Vincent

Hi Vincent,

I think you would only need Forrest if you plan to build the
docs for
the full distribution. I noticed from your check.setup
output that
you're using Tomcat 6. Will be curious to hear how that
goes.

Kind regards,
Carlin

On 9/7/07, vincent poirriez <vincent.poirriezuniv-valenciennes.fr> wrote:
>
> Le 7 sept. 07 à 19:02, Jacob Danner a écrit :
>
> > Apache Forrest is needed for the documentation to
build. You can
> > further verify your environment setup with the
'bootstrap' and
> > 'check.setup' targets.
>
> OK, i'll install it but (just to precise it is not
checked)
> $> ant check.setup
> Buildfile: build.xml
>
> check.setup:
>       [echo]
>       [echo] java.home       =
/System/Library/Frameworks/
> JavaVM.framework/Versions/1.5.0/Home
>       [echo] ant.home        = /sw/lib/ant
>       [echo] ant.version     = Apache Ant version 1.7.0
compiled on
> September 7 2007
>       [echo] beehive.home    =
/Users/poirriez/Library/Apache/beehive/
> trunk
>       [echo] beehive.version = 1.1-SNAPSHOT
>       [echo] ant.version.ok = true
>       [echo]
>       [echo] JSR 173 is installed correctly as
/Users/poirriez/
>
Library/Apache/beehive/trunk/installed/jsr173/jsr173_1.0_api
.jar
>       [echo] junit.jar appears to be available since
the class
> "junit.framework.TestCase" was successfully
loaded
>       [echo] Tomcat appears to be available in
/Users/poirriez/
> Library/Apache/apache-tomcat-6.0.14/build
>       [echo] manager role appears to be defined in
/Users/poirriez/
>
Library/Apache/apache-tomcat-6.0.14/build/conf/tomcat-users.
xml
>
> Vincent

Hi,

  first, recall I 'm a newbie to beehive

   after some work, I've succeed to install beehive from the
svn sources

   I try to give a chance to an existing project, but it
appears it  
uses deploy-wsm wich is no longer in the distribution (it is
present  
in beehive-import.xml in the previous release)

   I try some hack (copy and past from one version to
another)  but  
it does work, if someone
   have a work around or some explanitions, it 'll be fine

thanks in advance

  Vincent

For information, the "exercise I try is A.3 in this tp:
http:// 
sardes.inrialpes.fr/ecole/livre/pub/Annexes/Webserv/webserv_
prat.html
the archive is there: http://sa
rdes.inrialpes.fr/ecole/livre/pub/ 
Annexes/Webserv/Ressources/webserv_prat_1.tar



Le 7 sept. 07 à 19:21, Carlin Rogers a écrit :

> Hi Vincent,
>
> I think you would only need Forrest if you plan to
build the docs for
> the full distribution. I noticed from your check.setup
output that
> you're using Tomcat 6. Will be curious to hear how that
goes.
>
> Kind regards,
> Carlin
>
> On 9/7/07, vincent poirriez <vincent.poirriezuniv-valenciennes.fr>  
> wrote:
>>
>> Le 7 sept. 07 à 19:02, Jacob Danner a écrit :
>>
>>> Apache Forrest is needed for the documentation
to build. You can
>>> further verify your environment setup with the
'bootstrap' and
>>> 'check.setup' targets.
>>
>> OK, i'll install it but (just to precise it is not
checked)
>> $> ant check.setup
>> Buildfile: build.xml
>>
>> check.setup:
>>       [echo]
>>       [echo] java.home       =
/System/Library/Frameworks/
>> JavaVM.framework/Versions/1.5.0/Home
>>       [echo] ant.home        = /sw/lib/ant
>>       [echo] ant.version     = Apache Ant version
1.7.0 compiled on
>> September 7 2007
>>       [echo] beehive.home    =
/Users/poirriez/Library/Apache/ 
>> beehive/
>> trunk
>>       [echo] beehive.version = 1.1-SNAPSHOT
>>       [echo] ant.version.ok = true
>>       [echo]
>>       [echo] JSR 173 is installed correctly as
/Users/poirriez/
>>
Library/Apache/beehive/trunk/installed/jsr173/jsr173_1.0_api
.jar
>>       [echo] junit.jar appears to be available
since the class
>> "junit.framework.TestCase" was
successfully loaded
>>       [echo] Tomcat appears to be available in
/Users/poirriez/
>> Library/Apache/apache-tomcat-6.0.14/build
>>       [echo] manager role appears to be defined in
/Users/poirriez/
>>
Library/Apache/apache-tomcat-6.0.14/build/conf/tomcat-users.
xml
>>
>> Vincent
>
> -- 
> Ce message a été vérifié par MailScanner
> pour des virus ou des polluriels et rien de
> suspect n'a été trouvé.
>