Hi Cezar,
thanks. I've used:
- XMLCursor.selectPath()
- only one XMLCursor object
- + cursor.push() & cursor.pop() methods.
Now the result is ok:
Response:
<eda:quoteEvent xmlns:eda="http://www.bsourc
e.ch/EDA">
<eda:security>CS GROUP N</eda:security>
<eda:date>09-03-2007</eda:date>
<eda:time/>
<eda:national-nr>1213853</eda:national-nr>
<eda:change>-0.2</eda:change>
<eda:volume>5821192</eda:volume>
<eda:currency
transcoder="CURRENCY">001</eda:currency>
<eda:prev-close>87.9</eda:prev-close>
<eda:open>87.75</eda:open>
<eda:currency
transcoder="CURRENCY">002</eda:currency>
<eda:last>87.7</eda:last>
</eda:quoteEvent>
but what about the 'huge response time' ?
execQuery elapsed time msec: 3281 for a document of only 471
bytes !
Thanks again
Patrizio
-----Original Message-----
From: Cezar Andrei [mailto:cezar bea.com]
Sent: venerd́, 6. aprile 2007 19:11
To: userxmlbeans.apache.org
Subject: RE: XMLBeans and XmlCursor
Hi Patrizio,
execQuery() methods return new documents (there are queries
that
construct new documents), so the modifications on results
will not
affect the original.
In your case, you should be better off using
XMLCursor.selectPath().
This method will set a selection on the original document,
than use
hasNext/toNextSelection methods to navigate.
Avoid creation of many cursors, if you want to improve
performance, in
your case one is probably enough, moving a cursor anywhere
in a document
is much faster than managing many cursors. After you're done
with it
don't forget to call dispose().
Cezar
> -----Original Message-----
> From: Patrizio.Ferlitob-source.ch
[mailto:Patrizio.Ferlitob-source.ch]
> Sent: Friday, April 06, 2007 10:41 AM
> To: userxmlbeans.apache.org
> Subject: XMLBeans and XmlCursor
>
>
> Hi all,
>
> I've just started to use XMLBeans and I had some
troubles to use
> XmlCursor to navigate through a document, update it and
get back the
> updated version.
>
> This is my xml document:
>
> <?xml version="1.0"
encoding="UTF-8"?>
> <eda:quoteEvent xmlns:eda="http://www.bsourc
e.ch/EDA">
> <eda:security>CS GROUP N</eda:security>
> <eda:date>09-03-2007</eda:date>
> <eda:time/>
>
<eda:national-nr>1213853</eda:national-nr>
> <eda:change>-0.2</eda:change>
> <eda:volume>5821192</eda:volume>
> <eda:currency
transcoder="CURRENCY">CHF</eda:currency>
> <eda:prev-close>87.9</eda:prev-close>
> <eda:open>87.75</eda:open>
> <eda:last>87.7</eda:last>
> </eda:quoteEvent>
>
> I would like to retrieve all nodes with transcoder
attribute (I've
used
> the //transcoder/.. expression), call another component
(for
> transcodification) and get back the below new one:
>
> <?xml version="1.0"
encoding="UTF-8"?>
> <eda:quoteEvent xmlns:eda="http://www.bsourc
e.ch/EDA">
> <eda:security>CS GROUP N</eda:security>
> <eda:date>09-03-2007</eda:date>
> <eda:time/>
>
<eda:national-nr>1213853</eda:national-nr>
> <eda:change>-0.2</eda:change>
> <eda:volume>5821192</eda:volume>
> <eda:currency
transcoder="CURRENCY">001</eda:currency>
> <eda:prev-close>87.9</eda:prev-close>
> <eda:open>87.75</eda:open>
> <eda:last>87.7</eda:last>
> </eda:quoteEvent>
>
> The code is:
>
> XmlObject xobj = XmlObject.Factory.parse(new
> ByteArrayInputStream(bodyEvent.getBytes()));
> XmlObject response = EDATool.transcodification (xobj,
"SMI-EDA");
>
> where
>
> public static XmlObject transcodification (XmlObject
bodyEvent, String
> encoder) throws Exception
> {
> if ((bodyEvent == null) || (encoder == null))
> throw new Exception("unexpected null
object");
>
> long start = System.currentTimeMillis();
> XmlObject[] elems = bodyEvent.execQuery("//transcoder/..");
> System.out.println ("execQuery elapsed time msec:
" +
> (System.currentTimeMillis() - start));
>
> for (int i = 0; i < elems.length; i++)
> {
> XmlCursor cursor = elems[i].newCursor();
> TokenType token = null;
>
> String value = cursor.getTextValue();
> String table = null;
>
> while (cursor.hasNextToken())
> {
> token = cursor.toNextToken();
> if (token.isAttr() &&
>
"transcoder".equals(cursor.getName().toString()))
> {
> table = cursor.getTextValue();
> break;
> }
> }
>
> if (table != null)
> {
> cursor.pop();
> value = transcode(table, encoder, value);
> cursor.setTextValue(value);
> }
> cursor.dispose();
> }
> return bodyEvent;
> }
>
> My doubts:
>
> 1) I noticed that the time for executing execQuery is
not neglectable
> (msec: 3688 for a document of only 471 bytes).
> What is wrong in my code ?
> 2) after disposing the cursor the document is not
updated, how could I
> write back my changes to the document ?
>
> Regards
> Patrizio
>
Notice: This email message, together with any attachments,
may contain information of BEA Systems, Inc., its
subsidiaries and affiliated entities, that may be
confidential, proprietary, copyrighted and/or legally
privileged, and is intended solely for the use of the
individual or entity named in this message. If you are not
the intended recipient, and have received this message in
error, please immediately return this by email and then
delete it.
------------------------------------------------------------
---------
To unsubscribe, e-mail: user-unsubscribexmlbeans.apache.org
For additional commands, e-mail: user-helpxmlbeans.apache.org
IMPORTANT:
This e-mail transmission is intended for the named
addressee(s)only.
Its contents are private, confidential and protected
from disclosure and should not be read, copied or
disclosed by any other person.
If you are not the intended recipient, we kindly ask
you to notify the sender immediately by telephone
(+41 (0)58 806 50 00), to redirect the message to the
account "infob-source.ch" and to delete this
e-mail.
E-mail transmissions may be intercepted, altered or
read by unauthorized persons and may contain viruses.
Therefore, it is recommended that you use regular mail
or courier services for any information intended to be
confidential. However, by sending us messages through
e-mail, you authorize and instruct us to correspond by
e-mail in the relevant matter.
Thank you.
------------------------------------------------------------
---------
To unsubscribe, e-mail: user-unsubscribexmlbeans.apache.org
For additional commands, e-mail: user-helpxmlbeans.apache.org
|
