Recording sound directly from zaptel

Can you use the Monitor application?

> -----Original Message-----
> From: asterisk-dev-bounceslists.digium.com
[mailto:asterisk-dev-
> bounceslists.digium.com] On Behalf Of Maxim Vexler
> Sent: Friday, May 26, 2006 7:04 PM
> To: asterisk-devlists.digium.com
> Subject: [asterisk-dev] Recording sound directly from
zaptel
> 
> Hello list
> 
> I need to do a bit of frequency analyzing for the PSTN
telephony
> system in Israel. I'm using Digium's TDM400 with FXO
module on port1.
> 
> To be more particular - I'm trying to identify what
signals our telco
> company (bezeq) sends upon remote call hangup.
> 
> For this I'm looking to somehow record the raw sound
information
> coming from the phone line into the zaptel device and
upper to the
> zapata driver, preferably while asterisk is using the
device.
> 
> The preferred recording format is WAV so that I could
latter on use
> Frequency Analyzer from relisoft.com to analyze it.
> 
> Can I in some way, running as root of curse, get a
"direct recording
> interface" to the device (Using the kernel I
assume)?
> 
> Thank you,
> Maxim.
> 
> [1] http://www
.relisoft.com/freeware/freq.html
> 
> --
> Cheers,
> Maxim Vexler
> 
> "Free as in Freedom" - Do u GNU ?
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-dev mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev

I am curious what they would send on an analog line at
hangup.  I can 
see data at the calls arrival making sense (CallerID) but
what would 
they send at hangup and why?  I thought they usually (at
least here in 
the US) send a physical voltage change such as polarity
reversal to 
indicate hangup.

I guess monitor my work if there is in fact audio being sent
before 
hangup.  Other than that, maybe you could setup TDMoE,
capture the 
packets and see what is what.  Have you put a butt set on
the line and 
listened without actually taking it off-hook for audio?

Thanks,
Steve

Alexander Lopez wrote:
> Can you use the Monitor application?
>
>   
>> -----Original Message-----
>> From: asterisk-dev-bounceslists.digium.com
[mailto:asterisk-dev-
>> bounceslists.digium.com] On Behalf Of Maxim
Vexler
>> Sent: Friday, May 26, 2006 7:04 PM
>> To: asterisk-devlists.digium.com
>> Subject: [asterisk-dev] Recording sound directly
from zaptel
>>
>> Hello list
>>
>> I need to do a bit of frequency analyzing for the
PSTN telephony
>> system in Israel. I'm using Digium's TDM400 with
FXO module on port1.
>>
>> To be more particular - I'm trying to identify
what signals our telco
>> company (bezeq) sends upon remote call hangup.
>>
>> For this I'm looking to somehow record the raw
sound information
>> coming from the phone line into the zaptel device
and upper to the
>> zapata driver, preferably while asterisk is using
the device.
>>
>> The preferred recording format is WAV so that I
could latter on use
>> Frequency Analyzer from relisoft.com to analyze it.
>>
>> Can I in some way, running as root of curse, get a
"direct recording
>> interface" to the device (Using the kernel I
assume)?
>>
>> Thank you,
>> Maxim.
>>
>> [1] http://www
.relisoft.com/freeware/freq.html
>>
>> --
>> Cheers,
>> Maxim Vexler
>>
>> "Free as in Freedom" - Do u GNU ?
>>     
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
>
>   

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-dev mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev