I Can't acces PSTN numbers

Hi all,

I hava SER with many clients (sipura SPA2100). One of these
is an
Asterisk which have others clients (sipuraSPA2100).
I also have a Cisco GW which give me access to the PSTN.
I make calls to all IP phones in my network, but I can't
call PSTN
numbers. After I dial, I hear 2 ringbacks but at the same
time
Asterisk says:

Called pstn_numberSER_ip_address
SIP/SER_ip_address-ec75 is circuit-busy
Everyone is  busy/congested at this time (1:0/1/0)

Then I hear busy tone.

I tried thousands of parameters. (Ovbiously not the correct
one :-s )
Any body could help me with this?

Thanks very much in  advance

Sebastian
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-dev mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev

This is either a ser or asterisk USERS question.

Sebastian Milioto wrote:
> Hi all,
>
> I hava SER with many clients (sipura SPA2100). One of
these is an
> Asterisk which have others clients (sipuraSPA2100).
> I also have a Cisco GW which give me access to the
PSTN.
> I make calls to all IP phones in my network, but I
can't call PSTN
> numbers. After I dial, I hear 2 ringbacks but at the
same time
> Asterisk says:
>
> Called pstn_numberSER_ip_address
> SIP/SER_ip_address-ec75 is circuit-busy
> Everyone is  busy/congested at this time (1:0/1/0)
>
> Then I hear busy tone.
>
> I tried thousands of parameters. (Ovbiously not the
correct one :-s )
> Any body could help me with this?
>
> Thanks very much in  advance
>
> Sebastian
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-dev
>

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-dev mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev

Do you think it is a SER isssue?

Sebastian




On 5/27/06, Steve Totaro <stotaroasteriskhelpdesk.com>
wrote:
> This is either a ser or asterisk USERS question.
>
> Sebastian Milioto wrote:
> > Hi all,
> >
> > I hava SER with many clients (sipura SPA2100). One
of these is an
> > Asterisk which have others clients
(sipuraSPA2100).
> > I also have a Cisco GW which give me access to the
PSTN.
> > I make calls to all IP phones in my network, but I
can't call PSTN
> > numbers. After I dial, I hear 2 ringbacks but at
the same time
> > Asterisk says:
> >
> > Called pstn_numberSER_ip_address
> > SIP/SER_ip_address-ec75 is circuit-busy
> > Everyone is  busy/congested at this time (1:0/1/0)
> >
> > Then I hear busy tone.
> >
> > I tried thousands of parameters. (Ovbiously not
the correct one :-s )
> > Any body could help me with this?
> >
> > Thanks very much in  advance
> >
> > Sebastian
> > _______________________________________________
> > --Bandwidth and Colocation provided by
Easynews.com --
> >
> > asterisk-dev mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-dev
> >
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-dev mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev

Not to be a jerk but I have no idea, I just know it is not a
Development 
issue.  Just trying to spare you from the flames you are
sparking.


Sebastian Milioto wrote:
> Do you think it is a SER isssue?
>
> Sebastian
>
>
>
>
> On 5/27/06, Steve Totaro <stotaroasteriskhelpdesk.com> wrote:
>> This is either a ser or asterisk USERS question.
>>
>> Sebastian Milioto wrote:
>> > Hi all,
>> >
>> > I hava SER with many clients (sipura SPA2100).
One of these is an
>> > Asterisk which have others clients
(sipuraSPA2100).
>> > I also have a Cisco GW which give me access to
the PSTN.
>> > I make calls to all IP phones in my network,
but I can't call PSTN
>> > numbers. After I dial, I hear 2 ringbacks but
at the same time
>> > Asterisk says:
>> >
>> > Called pstn_numberSER_ip_address
>> > SIP/SER_ip_address-ec75 is circuit-busy
>> > Everyone is  busy/congested at this time
(1:0/1/0)
>> >
>> > Then I hear busy tone.
>> >
>> > I tried thousands of parameters. (Ovbiously
not the correct one :-s )
>> > Any body could help me with this?
>> >
>> > Thanks very much in  advance
>> >
>> > Sebastian
>> >
_______________________________________________
>> > --Bandwidth and Colocation provided by
Easynews.com --
>> >
>> > asterisk-dev mailing list
>> > To UNSUBSCRIBE or update options visit:
>> >   http://lists.digium.com/mailman/listinfo/asterisk-dev
>> >
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com
--
>>
>> asterisk-dev mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-dev
>>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-dev
>

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-dev mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev

looks like ser is not accepting the call or similar,
checkout the
'ngrep' command and listen for incoming packets on the
ser-port
respectively ip/machine:

ngrep -W byline port 5060 or ngrep -W byline host
xxx.xxx.xxx.xxx

if you can't find the problem with this debug, you should
go to the
users-list to ask your question(this list is intended for
the
development of asterisk, not its configuration)

regards
christian


On Sat, 27 May 2006 11:44:12 -0300
"Sebastian Milioto" <smiliotogmail.com> wrote:

> Hi all,
> 
> I hava SER with many clients (sipura SPA2100). One of
these is an
> Asterisk which have others clients (sipuraSPA2100).
> I also have a Cisco GW which give me access to the
PSTN.
> I make calls to all IP phones in my network, but I
can't call PSTN
> numbers. After I dial, I hear 2 ringbacks but at the
same time
> Asterisk says:
> 
> Called pstn_numberSER_ip_address
> SIP/SER_ip_address-ec75 is circuit-busy
> Everyone is  busy/congested at this time (1:0/1/0)
> 
> Then I hear busy tone.
> 
> I tried thousands of parameters. (Ovbiously not the
correct one :-s )
> Any body could help me with this?
> 
> Thanks very much in  advance
> 
> Sebastian
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-dev mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev