libpri for FBSD 6.1 and 1.2.11

I've got the latest trunk from svn, and the wcte11xp loads
fine
on my DL320 now.

Is there a different Libpri I need to get from svn?

Not sure what else I need for asterisk to handle my PRI.  I
know the
driver is loaded, and sees the Digium card, but I'm
guessing
I need a libpri before asterisk will be able to manage the
channels.

Any suggestions?

Thanks,

Bill

_______________________________________________
Asterisk-BSD mailing list
Asterisk-BSDlists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-bsd

On 09/06/06 11:57 Bill Harris said the following:
> I've got the latest trunk from svn, and the wcte11xp
loads fine
> on my DL320 now.
> 
> Is there a different Libpri I need to get from svn?

libpri 1.2.3 from digium should work fine.

> Not sure what else I need for asterisk to handle my
PRI.  I know the
> driver is loaded, and sees the Digium card, but I'm
guessing

be sure to have libpri built and install before building and
installing 
asterisk. this is so the makefile mechanism can detect an
installed libpri 
and build chan_zap with PRI functionality.

-- 
Regards,                           /\_/\   "All dogs
go to heaven."
dineshalphaque.com                (0 0)   http://www.openmalay
siablog.com/
+==========================----oOO--(_)--OOo----============
==============+
| for a in past present future; do                          
             |
|   for b in clients employers associates relatives
neighbours pets; do   |
|   echo "The opinions here in no way reflect the
opinions of my $a $b."  |
| done; done                                                
             |
+===========================================================
==============+
_______________________________________________
Asterisk-BSD mailing list
Asterisk-BSDlists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-bsd

Hmm..

Well, it won't build.   I tracked down zaptel.h and full
pathed it, now
it's looking for zap.h, which I haven't been able to find?

Nothing in the zaptel-bsd-trunk or asterisk build
directories or the
normal include directories.

Bill


On Sep 6, 2006, at 1:54 AM, Dinesh Nair wrote:

>
>
> On 09/06/06 11:57 Bill Harris said the following:
>> I've got the latest trunk from svn, and the
wcte11xp loads fine
>> on my DL320 now.
>> Is there a different Libpri I need to get from svn?
>
> libpri 1.2.3 from digium should work fine.
>
>> Not sure what else I need for asterisk to handle my
PRI.  I know the
>> driver is loaded, and sees the Digium card, but
I'm guessing
>
> be sure to have libpri built and install before
building and  
> installing asterisk. this is so the makefile mechanism
can detect  
> an installed libpri and build chan_zap with PRI
functionality.
>
> -- 
> Regards,                           /\_/\   "All
dogs go to heaven."
> dineshalphaque.com                (0 0)   http:// 
> www.openmalaysiablog.com/
> +==========================----oOO--(_)--OOo---- 
> ==========================+
> | for a in past present future;  
> do                                        |
> |   for b in clients employers associates relatives
neighbours  
> pets; do   |
> |   echo "The opinions here in no way reflect the
opinions of my $a  
> $b."  |
> | done;  
> done                                                   
          |
>
+===========================================================
========== 
> ====+
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSDlists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd

_______________________________________________
Asterisk-BSD mailing list
Asterisk-BSDlists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-bsd

On 09/07/06 01:36 BHarriscelinaisd.com said the
following:
> was a Pentium 4 2.4Ghz with larger cache.  This one is
the 2.93Ghz with 
> 256k
> L2 cache.

what's your 'vmstat 5' and your 'vmstat -i' output ?

> loss caused my bge driver watchdog to reset the port. 
Ugly.  

the bge(4) driver supports polling(4). you may want to turn
that on to 
alleviate interrupt processing somewhat.

-- 
Regards,                           /\_/\   "All dogs
go to heaven."
dineshalphaque.com                (0 0)   http://www.openmalay
siablog.com/
+==========================----oOO--(_)--OOo----============
==============+
| for a in past present future; do                          
             |
|   for b in clients employers associates relatives
neighbours pets; do   |
|   echo "The opinions here in no way reflect the
opinions of my $a $b."  |
| done; done                                                
             |
+===========================================================
==============+
_______________________________________________
Asterisk-BSD mailing list
Asterisk-BSDlists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-bsd

On 09/08/06 05:36 Bill Harris said the following:
> Well, it won't build.   I tracked down zaptel.h and
full pathed it, now
> it's looking for zap.h, which I haven't been able to
find?

do be more specific with your observations. did you build
zaptel from the 
zaptel-bsd subversion repository and install it ? this would
install 
zaptel.h in /usr/local/include as per the freebsd
convention.

-- 
Regards,                           /\_/\   "All dogs
go to heaven."
dineshalphaque.com                (0 0)   http://www.openmalay
siablog.com/
+==========================----oOO--(_)--OOo----============
==============+
| for a in past present future; do                          
             |
|   for b in clients employers associates relatives
neighbours pets; do   |
|   echo "The opinions here in no way reflect the
opinions of my $a $b."  |
| done; done                                                
             |
+===========================================================
==============+
_______________________________________________
Asterisk-BSD mailing list
Asterisk-BSDlists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-bsd

On 09/08/06 21:21 BHarriscelinaisd.com said the
following:
> 
> Yes, I did build from sub-version, and I found zaptel.h
, and I full 
> pathed it
> in the include,   it then was needing zap.h, which is
the one I couldn't 
> find.

could you post your build output ? zap.h is an odd file to
look for, since 
it doesnt exist in zaptel-bsd. i just built 1.2.12 on
freebsd 6.1 without 
any issues.

-- 
Regards,                           /\_/\   "All dogs
go to heaven."
dineshalphaque.com                (0 0)   http://www.openmalay
siablog.com/
+==========================----oOO--(_)--OOo----============
==============+
| for a in past present future; do                          
             |
|   for b in clients employers associates relatives
neighbours pets; do   |
|   echo "The opinions here in no way reflect the
opinions of my $a $b."  |
| done; done                                                
             |
+===========================================================
==============+
_______________________________________________
Asterisk-BSD mailing list
Asterisk-BSDlists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-bsd