more rings on fxo

Hello,

I have TDM11B installed on 6.2-STABLE with asterisk-1.4.4_2
and
zaptel-1.4.1

I'd like to recive PSTN calls this manner:

exten = s,1,Dial(tra-la-la,60,..)
to get zap fxo channel answered only when some one pick up
dialed
extension.
but after few (from three to five) rings asterisk hangs up
zap channel

Is there any way to change this behaviour? I don't like to
use answer
application before dialing.

I am also expiriencing low volume when call is bridged
between zap
channels and if rx and tx gains is rised voip calls become
extreamly
loud.

I hope someone points me to places in zaptel sources to
change these
situations if there are any or give some other advise.

Thanks.

-- 
WBR,
Tolstov Dmitry

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.c
om--

Asterisk-BSD mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-bsd

are you writen dialpaln free hand or some type of gui ?

On Thursday 28 June 2007 06:31:01 am Tolstov Dmitry wrote:
> Hello,
>
> I have TDM11B installed on 6.2-STABLE with
asterisk-1.4.4_2 and
> zaptel-1.4.1
>
> I'd like to recive PSTN calls this manner:
>
> exten = s,1,Dial(tra-la-la,60,..)
> to get zap fxo channel answered only when some one pick
up dialed
> extension.
> but after few (from three to five) rings asterisk hangs
up zap channel
>
> Is there any way to change this behaviour? I don't like
to use answer
> application before dialing.
>
> I am also expiriencing low volume when call is bridged
between zap
> channels and if rx and tx gains is rised voip calls
become extreamly
> loud.
>
> I hope someone points me to places in zaptel sources to
change these
> situations if there are any or give some other advise.
>
> Thanks.



_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.c
om--

Asterisk-BSD mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-bsd

By hands.

On Thu, Jun 28, 2007 at 08:37:29AM -0700, Richard Neese
wrote:
> are you writen dialpaln free hand or some type of gui
?
> 
> On Thursday 28 June 2007 06:31:01 am Tolstov Dmitry
wrote:
> > Hello,
> >
> > I have TDM11B installed on 6.2-STABLE with
asterisk-1.4.4_2 and
> > zaptel-1.4.1
> >
> > I'd like to recive PSTN calls this manner:
> >
> > exten = s,1,Dial(tra-la-la,60,..)
> > to get zap fxo channel answered only when some one
pick up dialed
> > extension.
> > but after few (from three to five) rings asterisk
hangs up zap channel
> >
> > Is there any way to change this behaviour? I don't
like to use answer
> > application before dialing.
> >
> > I am also expiriencing low volume when call is
bridged between zap
> > channels and if rx and tx gains is rised voip
calls become extreamly
> > loud.
> >
> > I hope someone points me to places in zaptel
sources to change these
> > situations if there are any or give some other
advise.
> >
> > Thanks.
> 

-- 
WBR,
Tolstov Dmitry

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.c
om--

Asterisk-BSD mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-bsd

just to jet you know the asterisk gui is in the ports 
tree /usr/ports/www/asterisk-gui.

On Thursday 28 June 2007 08:59:54 am Tolstov Dmitry wrote:
> By hands.
>
> On Thu, Jun 28, 2007 at 08:37:29AM -0700, Richard Neese
wrote:
> > are you writen dialpaln free hand or some type of
gui ?
> >
> > On Thursday 28 June 2007 06:31:01 am Tolstov
Dmitry wrote:
> > > Hello,
> > >
> > > I have TDM11B installed on 6.2-STABLE with
asterisk-1.4.4_2 and
> > > zaptel-1.4.1
> > >
> > > I'd like to recive PSTN calls this manner:
> > >
> > > exten = s,1,Dial(tra-la-la,60,..)
> > > to get zap fxo channel answered only when
some one pick up dialed
> > > extension.
> > > but after few (from three to five) rings
asterisk hangs up zap channel
> > >
> > > Is there any way to change this behaviour? I
don't like to use answer
> > > application before dialing.
> > >
> > > I am also expiriencing low volume when call
is bridged between zap
> > > channels and if rx and tx gains is rised voip
calls become extreamly
> > > loud.
> > >
> > > I hope someone points me to places in zaptel
sources to change these
> > > situations if there are any or give some
other advise.
> > >
> > > Thanks.



_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.c
om--

Asterisk-BSD mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-bsd

Ok, thanks , but I
prefer manual config editing.

Let's don't flame, can you give me an idia?

On Thu, Jun 28, 2007 at 09:18:42AM -0700, Richard Neese
wrote:
> just to jet you know the asterisk gui is in the ports 
> tree /usr/ports/www/asterisk-gui.
> 
> On Thursday 28 June 2007 08:59:54 am Tolstov Dmitry
wrote:
> > By hands.
> >
> > On Thu, Jun 28, 2007 at 08:37:29AM -0700, Richard
Neese wrote:
> > > are you writen dialpaln free hand or some
type of gui ?
> > >
> > > On Thursday 28 June 2007 06:31:01 am Tolstov
Dmitry wrote:
> > > > Hello,
> > > >
> > > > I have TDM11B installed on 6.2-STABLE
with asterisk-1.4.4_2 and
> > > > zaptel-1.4.1
> > > >
> > > > I'd like to recive PSTN calls this
manner:
> > > >
> > > > exten = s,1,Dial(tra-la-la,60,..)
> > > > to get zap fxo channel answered only
when some one pick up dialed
> > > > extension.
> > > > but after few (from three to five) rings
asterisk hangs up zap channel
> > > >
> > > > Is there any way to change this
behaviour? I don't like to use answer
> > > > application before dialing.
> > > >
> > > > I am also expiriencing low volume when
call is bridged between zap
> > > > channels and if rx and tx gains is rised
voip calls become extreamly
> > > > loud.
> > > >
> > > > I hope someone points me to places in
zaptel sources to change these
> > > > situations if there are any or give some
other advise.
> > > >
> > > > Thanks.

-- 
WBR,
Tolstov Dmitry

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.c
om--

Asterisk-BSD mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-bsd