|
List Info
Thread: Re: Asterisk, BSD, IAX & No Hardware
|
|
| Re: Asterisk, BSD, IAX & No
Hardware |
 
United States |
2007-10-05 11:39:10 |
How do you "run ztdummy", I've tried to load the
.ko file and I'm not sure I
know how cause it's still not working.
As a side note, to troubleshoot...I've got another box
that's running
FreeBSD 6.2 and Asterisk 1.4.3, and this other box has
Digium's hardware
card (with two lines), my two lines work, but I can't get
the IAX connection
to work still (even on this one with zaptel installed and
working).
Any ideas...
John
-----Original Message-----
From: asterisk-bsd-bounces lists.digium.com
[mailto:asterisk-bsd-bounceslists.digium.com] On Behalf
Of Richard
Sent: Friday, October 05, 2007 2:01 am
To: Asterisk on BSD discussion
Subject: Re: [Asterisk-bsd] Asterisk, BSD, IAX & No
Hardware
iax requires timing so you have to install zaptel and run
ztdummy.
On Friday 05 October 2007 04:52:18 John S. Strock wrote:
> Has anyone been able to setup Asterisk 1.4.11 and
FreeBSD 6.2, without
any
> zaptel hardware. I'm just trying to connect to an IAX
host, but I keep
> getting a CONGESTION error. I assume is because of the
hardware timer,
but
> I'm not sure.
>
>
>
> Thanks,
>
>
>
> John
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.c
om--
Asterisk-BSD mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-bsd
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.c
om--
Asterisk-BSD mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-bsd
|
|
| Re: Asterisk, BSD, IAX & No
Hardware |
United States |
2007-10-05 12:15:47 |
|
kldload /usr/local/lib/zaptel/ztdummy.ko I believe you will need the other zaptel stuff kldloaded as well. When you install zaptel, and it loads via the zaptel_enable="YES" method in your /etc/rc.conf it will load everything but ztdummy. At least my setup did. I had to load ztdummy by hand until I edited the startup file to take care of this. "John S. Strock" <john2007TheStrocks.com> wrote: How do you "run ztdummy", I've tried to load the .ko file and I'm not sure I
know how cause it's still not working.
As a side note, to troubleshoot...I've got another box that's running
FreeBSD 6.2 and Asterisk 1.4.3, and this other box has Digium's hardware
card (with two lines), my two lines work, but I can't get the IAX connection
to work still (even on this one with zaptel installed
and working).
Any ideas...
John
-----Original Message-----
From: asterisk-bsd-bounceslists.digium.com
[mailto:asterisk-bsd-bounceslists.digium.com] On Behalf Of Richard
Sent: Friday, October 05, 2007 2:01 am
To: Asterisk on BSD discussion
Subject: Re: [Asterisk-bsd] Asterisk, BSD, IAX & No Hardware
iax requires timing so you have to install zaptel and run ztdummy.
On Friday 05 October 2007 04:52:18 John S. Strock wrote:
>; Has anyone been able to setup Asterisk 1.4.11 and FreeBSD 6.2, without
any
> zaptel hardware. I'm just trying to connect to an IAX host, but I keep
> getting a CONGESTION error. I assume is because of the hardware timer,
but
> I'm not sure.
>
>
>
> Thanks,
>
>
>;
> John
_______________________________________________
--Bandwidth and Colocation Provided by
http://www.api-digital.com--
Asterisk-BSD mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-bsd
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
Asterisk-BSD mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-bsd
 
Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase.
|
[1-2]
|
|
|
about | contact Other archives ( Real Estate discussion Medical topics )
|