List Info

Thread: Clicking noise on TDM400P




Clicking noise on TDM400P
user name
2006-05-26 07:52:03
As an update to further digging, I tried using the #4
channel on the card 
(different dsp just to rule out a defective one as well),
and the clicking 
remained.  I changed the card out for a X100P that I had
laying around, (I 
believe it's genuine digium, I can't guarantee it,
relevant dmesg info 
below) and the clicking was gone, perfect call quality.  Now
I'm just 
wondering if anyone else on the list has the TDM100P with
FreeBSD 6.1-STABLE 
(source current as of May 18th).

-Aaron

--------Start dmesg--------
May 25 23:18:17 asterisk kernel: Zapata Telephony Interface
Registered on 
major 196
May 25 23:18:17 asterisk kernel: Echo Canceller: MARK2
May 25 23:18:18 asterisk kernel: ZapTel device: vendor=1057
device=5608 
subvendor=1057
May 25 23:18:18 asterisk kernel: wcfxo0: <Wildcard
X100P> port 0xd800-0xd8ff 
mem 0xff000000-0xff000fff irq 10 at device 14.0 on pci0
May 25 23:18:18 asterisk kernel: ZapTel Attach for wcfxo0:
deviceID : 0x1057
May 25 23:18:18 asterisk kernel: wcfxo0: [FAST]
May 25 23:18:18 asterisk kernel: wcfxo: DAA mode is 'FCC'
May 25 23:18:18 asterisk kernel: Found a Wildcard FXO:
Wildcard X100P
May 25 23:18:18 asterisk kernel: ZapTel device loaded.
--------Stop dmesg--------

----- Original Message ----- 
From: "Aaron Seelye" <aseelye-listseltopia.com>
To: "Asterisk on BSD discussion"
<asterisk-bsdlists.digium.com>
Sent: Thursday, May 25, 2006 7:28 PM
Subject: [Asterisk-bsd] Clicking noise on TDM400P


> Hello,
>
> I have a TDM400P with 4 FXO ports, currently using one.
 When sending or 
> receiving calls on this card, there is a nearly
constant popping/clicking 
> sound, which some digging said it was related to the
echo cancellation.  I 
> adjusted my gains properly, but to no avail.  I even
found that setting 
> echotraining=no in zapata.conf didn't change the
scenario at all.  I've 
> plugged analog handsets into the same jack, and the
line is crystal-clear. 
> Below is my zapata.conf, if you guys have any ideas how
I might resolve 
> this, I'd appreciate it.  I'm running the latest
zaptel and asterisk btw.
>
> Thanks,
>
> Aaron Seelye
>
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSDlists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
> 


_______________________________________________
Asterisk-BSD mailing list
Asterisk-BSDlists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-bsd
[1]

about | contact  Other archives ( Real Estate discussion Medical topics )