List Info

Thread: jhalfs2.2 and clfs3 not working




jhalfs2.2 and clfs3 not working
country flaguser name
United States		 2007-03-12 10:25:22 
here is output  :

# using defaults found in configuration
#

*** End of JHALFS configuration.
Loading config params from <configuration>...OK
Loading common-functions module...
Loading <func_book_parser>...OK
Loading <func_download_pkgs>...OK
Loading <func_wrt_Makefile>...OK
Loading <func_blfs_deps>...OK
    ...OK
Loading code module <CLFS3/master.sh>...OK
------------------------------------------------------------
------------------

Loading function <func_check_version.sh>...OK
Loading function <func_validate_configs.sh>...OK
Loading function <func_custom_pkgs>...OK
------------------------------------------------------------
------------------


KERNEL............ <2.6.20>    OK
BASH.............. <3.1.17(1)-release> OK
GCC............... <4.1.2>     OK
GLIBC............. <2.3.6>     OK
BINUTILS.......... <2.17>      OK
TAR............... <1.16.1>    OK
BZIP2............. <1.0.4>     OK
COREUTILS......... < 6.7>      OK
DIFF.............. <2.8.7>     OK
FIND.............. <4.2.29>    OK
GAWK.............. <3.1.5>     OK
GREP.............. <2.5.1>     OK
GZIP.............. <1.3.11>    OK
MAKE.............. <3.81>      OK
PATCH............. <2.5.9>     OK
SED............... <4.1.5>     OK
SUDO.............. <1.6.8p12>  OK
LIBXML2........... <2.06.26>   OK
LIBXSLT........... <1.01.17>   OK
------------------------------------------------------------
------------------

BOOK.............. <clfs3-development>
BUILDDIR.......... </mnt/build_dir>
SRC_ARCHIVE....... <>   <-- NO directory name
given
GETPKG............ <y>
RUNMAKE........... <y>
ARCH.............. <x86>
PLATFORM.......... <>
TARGET............ <i686-pc-linux-uclibc>
REPORT............ <n>
FSTAB............. <>
CONFIG............ <>
GETKERNEL......... <n>
VIMLANG........... <y>
PAGE.............. <letter>
TIMEZONE.......... <GMT>
LANG.............. <POSIX>
LUSER............. <lfs>
LGROUP............ <lfs>
CUSTOM_TOOLS...... <n>
REBUILD_MAKEFILE.. <n>

*** clfs3 config parameters look good ***

------------------------------------------------------------
------------------

Are you happy with these settings? yes/no (no): yes

------------------------------------------------------------
------------------

Cleaning /mnt/build_dir ...done
Cleaning /mnt/build_dir/jhalfs ...done
Cleaning remainig extracted sources in
/mnt/build_dir/sources ...done
Downloading the clfs3 document, development version... done
Extracting commands for <x86> target architecture
...OK
Creating <clfs3> list of tarball names for
clfs3-development x86 ...OK
Creating CLFS3 <x86> specific URLs file ...OK
binutils-2.17.tar.bz2: not found in
busybox-1.4.1.tar.bz2: not found in
clfs-embedded-bootscripts-1.0-pre4.tar.bz2: not found in
e2fsprogs-1.39.tar.gz: not found in
gcc-4.1.2.tar.bz2: not found in
iana-etc-2.20.tar.bz2: not found in
linux-headers-2.6.20.1-02252007.tar.bz2: not found in
uClibc-snapshot.tar.bz2: not found in
md5sum: standard input: no properly formatted MD5 checksum
lines found
MD5SUM did not match REMOTE copy
removed `uClibc-snapshot.tar.bz2'
--15:23:25--  http://www.uclibc.org/downloads/uClibc-snapshot.tar.bz2
           => `uClibc-snapshot.tar.bz2'
Resolving www.uclibc.org... 140.211.166.42
Connecting to www.uclibc.org|140.211.166.42|:80...
connected.
HTTP request sent, awaiting response... 200 OK
Length: 3,610,658 (3.4M) [application/x-tar]

100%[=======================================================
============================================================
===================>] 
3,610,658     65.41K/s    ETA 00:00

15:24:07 (83.99 KB/s) - `uClibc-snapshot.tar.bz2' saved
[3610658/3610658]

md5sum: standard input: no properly formatted MD5 checksum
lines found
uClibc-snapshot.tar.bz2 does not match MD5SUMS value
Generating a new MD5SUM for uClibc-snapshot.tar.bz2
zlib-1.2.3.tar.gz: not found in
binutils-2.17-posix-1.patch: not found in
binutils-2.17-uclibc-1.patch: not found in
busybox-1.4.1-fixes-1.patch: not found in
gcc-4.1.2-cross_search_paths-1.patch: not found in
gcc-4.1.2-posix-1.patch: not found in
gcc-4.1.2-uclibc-1.patch: not found in
zlib-1.2.3-DESTDIR-1.patch: not found in


         One or more files were not retrieved or have bad
MD5SUMS.
         Check
</mnt/build_dir/sources/MISSING_FILES.DMP> for names

        *** Automatic execution of the generated makefile
has been 
inhibited. ***

 Document version <SVN-0.0.1-20070214-x86>
------------------------------------------------------------
------------------

Creating Makefile... START
        Processing... <host prep files ( SETUP ) >
        Processing... <cross tools     ( LUSER ) >
        Processing... <final system    ( LUSER ) >
        Processing... <bootscripts     ( LUSER ) >
        Processing... <make bootable   ( LUSER ) >
Creating Makefile... DONE
------------------------------------------------------------
------------------


<jhalfs 2.2> exit

-- 
http://linuxfromscratch.org/mailman/listinfo/alfs-discu
ss
FAQ: http://www.linux
fromscratch.org/faq/
Unsubscribe: See the above information page
Re: jhalfs2.2 and clfs3 not working
country flaguser name
Spain		 2007-03-12 12:59:28 
El Lunes, 12 de Marzo de 2007 16:25, Stéphane ANCELOT
escribió:
> here is output  :

>
> md5sum: standard input: no properly formatted MD5
checksum lines found
> uClibc-snapshot.tar.bz2 does not match MD5SUMS value
> Generating a new MD5SUM for uClibc-snapshot.tar.bz2

>          One or more files were not retrieved or have
bad MD5SUMS.
>          Check
</mnt/build_dir/sources/MISSING_FILES.DMP> for names
>
>         *** Automatic execution of the generated
makefile has been
> inhibited. ***

It's working as expected. 

jhalfs disables automatic system build when a package or
patch can't be 
downloaded or its MD5 sum can't be verified.

CLFS-Embedded is using a snaptshot of uClibc that is updated
daily, thus no 
MD5 sum value is available for that package (see the book)
and jhalfs set the 
RUNMAKE value to "no".

To build the system, after revising
/mnt/build_dir/sources/MISSING_FILES.DMP 
and be sure that all packages and patches has been
downloaded properly, you 
must to cd to /mnt/build_dir/jhalfs and run "make"
manually.

-- 
Manuel Canales Esparcia
Usuario de LFS nº2886:       http://www.linuxfroms
cratch.org
LFS en castellano: http://www.escomp
oslinux.org/lfs-es http://www.lfs-es.info
TLDP-ES:                           http://es.tldp.org
-- 
http://linuxfromscratch.org/mailman/listinfo/alfs-discu
ss
FAQ: http://www.linux
fromscratch.org/faq/
Unsubscribe: See the above information page
[1-2]

about | contact  Other archives ( Real Estate discussion Medical topics )