Re: btsco: Operation not supported

> On PDA:
> hciconfig hci0 features
> hci0:   Type: PCCARD
>         BD Address: 00:E0:03:25:7C:36 ACL MTU: 340:4
SCO MTU: 64:8
>         Features: 0xbf 0x00 0x20 0x00 0x00 0x00 0x00
0x00
>                 <3-slot packets> <5-slot
packets> 
> <encryption> <slot offset>
>                 <timing accuracy> <role
switch> <sniff mode>
> On notebook:
> hciconfig hci0 features
> hci0:   Type: USB
>         BD Address: 00:09D:10:02:
C2 ACL MTU: 192:8 SCO MTU: 64:8
>         Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00
0x00
>                 <3-slot packets> <5-slot
packets> 
> <encryption> <slot offset>
>                 <timing accuracy> <role
switch> <hold mode> 
> <sniff mode>
>                 <park state> <RSSI>
<channel quality> <SCO 
> link> <HV2 packets>
>                 <HV3 packets> <u-law log>
<A-law log> <CVSD> 
> <paging scheme>
>                 <power control> <transparent
SCO>
> 
> There is no <SCO link> on PDA! Is it possible to
change features?

Correct. Your PDA does not support SCO links. See my
previous mail.
It is simply not possible to change the features of a
bluetooth device.

Best Regards,

Mayank


------------------------------------------------------------
-------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the
chance to share your
opinions on IT & business topics through brief
surveys-and earn cash
http://www.techsay.com/default.
php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-devel mailing list
Bluez-devellists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

I have Socket CF Rev. F BT card. Bad luck. It doesn't
support SCO :(
Mayank BATRA wrote:
>> On PDA:
>> hciconfig hci0 features
>> hci0:   Type: PCCARD
>>         BD Address: 00:E0:03:25:7C:36 ACL MTU:
340:4 SCO MTU: 64:8
>>         Features: 0xbf 0x00 0x20 0x00 0x00 0x00
0x00 0x00
>>                 <3-slot packets> <5-slot
packets> 
>> <encryption> <slot offset>
>>                 <timing accuracy> <role
switch> <sniff mode>
>> On notebook:
>> hciconfig hci0 features
>> hci0:   Type: USB
>>         BD Address: 00:09D:10:02:
C2 ACL MTU: 192:8 SCO MTU: 64:8
>>         Features: 0xff 0xff 0x0f 0x00 0x00 0x00
0x00 0x00
>>                 <3-slot packets> <5-slot
packets> 
>> <encryption> <slot offset>
>>                 <timing accuracy> <role
switch> <hold mode> 
>> <sniff mode>
>>                 <park state> <RSSI>
<channel quality> <SCO 
>> link> <HV2 packets>
>>                 <HV3 packets> <u-law
log> <A-law log> <CVSD> 
>> <paging scheme>
>>                 <power control>
<transparent SCO>
>>
>> There is no <SCO link> on PDA! Is it possible
to change features?
> 
> Correct. Your PDA does not support SCO links. See my
previous mail.
> It is simply not possible to change the features of a
bluetooth device.
> 
> Best Regards,
> 
> Mayank
> 
> 


------------------------------------------------------------
-------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the
chance to share your
opinions on IT & business topics through brief
surveys-and earn cash
http://www.techsay.com/default.
php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-devel mailing list
Bluez-devellists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Ok. I have one stupid question.
My BT CF card doesn't support SCO.
Does this means that it dosn't support a2dp?
I tried start on PDA a2play and on notebook a2recv.
It's work.
I have plan to buy BT stereo headset to listen music from
PDA...
Mayank BATRA wrote:
>> On PDA:
>> hciconfig hci0 features
>> hci0:   Type: PCCARD
>>         BD Address: 00:E0:03:25:7C:36 ACL MTU:
340:4 SCO MTU: 64:8
>>         Features: 0xbf 0x00 0x20 0x00 0x00 0x00
0x00 0x00
>>                 <3-slot packets> <5-slot
packets> 
>> <encryption> <slot offset>
>>                 <timing accuracy> <role
switch> <sniff mode>
>> On notebook:
>> hciconfig hci0 features
>> hci0:   Type: USB
>>         BD Address: 00:09D:10:02:
C2 ACL MTU: 192:8 SCO MTU: 64:8
>>         Features: 0xff 0xff 0x0f 0x00 0x00 0x00
0x00 0x00
>>                 <3-slot packets> <5-slot
packets> 
>> <encryption> <slot offset>
>>                 <timing accuracy> <role
switch> <hold mode> 
>> <sniff mode>
>>                 <park state> <RSSI>
<channel quality> <SCO 
>> link> <HV2 packets>
>>                 <HV3 packets> <u-law
log> <A-law log> <CVSD> 
>> <paging scheme>
>>                 <power control>
<transparent SCO>
>>
>> There is no <SCO link> on PDA! Is it possible
to change features?
> 
> Correct. Your PDA does not support SCO links. See my
previous mail.
> It is simply not possible to change the features of a
bluetooth device.
> 
> Best Regards,
> 
> Mayank
> 
> 


------------------------------------------------------------
-------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the
chance to share your
opinions on IT & business topics through brief
surveys-and earn cash
http://www.techsay.com/default.
php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-devel mailing list
Bluez-devellists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel