|
List Info
Thread: Bluez-users Digest, Vol 2, Issue 26
|
|
| Bluez-users Digest, Vol 2, Issue 26 |

|
2006-06-22 03:54:40 |
|
An update to my earlier post below.
on the korebot
I changed the device -> class id in hcid.conf so it was 0x0203xx
which meant it was Networking /Adhoc device with an access point. I
don't think this really changed anything when I ran a pand --connect
<bluetooth address>.
I then tried to reconnect several times. I found this constant
connection woke up the host computer in some way and I was able to get
a bnep0 interface. I don't understand how this happens.
I then assigned ip address on both the korebot and the host computer
and made sure both interfaces were up and running. I got this message
on the korebot when I tried to ping.
PING 192.168.1.23 (192.168.1.23): 56 data bytes
NETDEV WATCHDOG: usbf: transmit timed out
NETDEV WATCHDOG: usbf: transmit timed out
NETDEV WATCHDOG: usbf: transmit timed out
NETDEV WATCHDOG: usbf: transmit timed out
NETDEV WATCHDOG: usbf: transmit timed out
NETDEV WATCHDOG: usbf: transmit timed out
NETDEV WATCHDOG: usbf: transmit timed out
Is there some other trick to initialisation of the bnep0 interface?
oot Possibility:/home/krobinson# hcidump
HCI sniffer - Bluetooth packet analyzer ver 1.23
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Role Change (0x12) plen 8
> HCI Event: Connect Complete (0x03) plen 11
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
> HCI Event: Max Slots Change (0x1b) plen 3
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 15 scid 0x0040
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1691
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1691
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 15 scid 0x0041
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0041 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
MTU 1691
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
MTU 1691
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
Success
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 15 scid 0x0042
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0042 scid 0x0042 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0042 flags 0x00 clen 4
MTU 1691
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0042 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0042 flags 0x00 clen 4
MTU 1691
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0042 flags 0x00 result 0 clen 0
Success
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 15 scid 0x0043
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0043 scid 0x0043 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0043 flags 0x00 clen 4
MTU 1691
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0043 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0043 flags 0x00 clen 4
MTU 1691
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0043 flags 0x00 result 0 clen 0
Success
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 15 scid 0x0044
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0044 scid 0x0044 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0044 flags 0x00 clen 4
MTU 1691
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0044 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0044 flags 0x00 clen 4
MTU 1691
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0044 flags 0x00 result 0 clen 0
Success
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 15 scid 0x0045
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0045 scid 0x0045 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0045 flags 0x00 clen 4
MTU 1691
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0045 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0045 flags 0x00 clen 4
MTU 1691
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0045 flags 0x00 result 0 clen 0
Success
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 15 scid 0x0046
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0046 scid 0x0046 result 0 status 0
Connection | |