Hi Michael,
> I'm trying to compile bluez-utils-2.24 project for
Linux 2.4.20 that
> runs on MIPS. This cross-compilation was done on my
desktop
> Linux 2.6.12. All needed drivers (HCI, RFCOMM, L2CAP)
were uploaded to
> the > MIPS-board early (after some patches for
kernel 2.4.20 that I
> found in internet). I configured the environment with
the following
> variables:
> export PLATFORM=mipsel-uclibc
> export BUILD=i386-pc-linux-gnu
> export HOSTCC=gcc
> export CROSS_COMPILE=mipsel-uclibc-
> export
LDFLAGS=-Wl,-dynamic-linker,/lib/ld-uClibc.so.0,-soname=libc
.so.0
> and runned ./configure mipsel-linux --build=$BUILD.
> Making the project was OK, it used
"mipsel-linux-gcc", etc., so
> it seemed OK. After uploading all the bluez utilities
on the
> MIPS-board, each call for these utilities (i.e.
"hciconfig") failed
> with such a prompt:
> libc.so.6: aborted attempt to load hciconfig!
> To my understanding, it still used my desktop standard
library
> (cause "libc.so.6" is a symbolic link in
/usr/local/lib on my PC)
> instead the libc.so.0 on the MIPS-board.
> I tryied adding LDFLAG "-soname=libc.so.0",
but it did
> not force defining the right library in building
executables.
> Could someone help me in configuring this project? What
did I miss?
I've never done this and I am not a cross-compiling expert.
Regards
Marcel
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep
through log files
for problems? Stop! Download the new AJAX search engine
that makes
searching your log files as easy as surfing the web.
DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/
sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
|