|
List Info
Thread: can't connect EPOX Keyboard BT-KB01B
|
|
| can't connect EPOX Keyboard BT-KB01B |
|
2006-07-28 16:48:06 |
Folks,
Thank you again for the help so far. I have placed a bunch
of output files on
my server for your viewing pleasure, instead of giving you
large outputs in
an email body.
This is the output from hcidump -X -V while just pressing
keys on the keyboard
after pressing the connect button:
http://www.f
eline-soul.com/files/hcidump
This is the output from hcidump -X -V when a "hcitool
cc 00:07:61:1B:50:9B" is
run:
http://www.feline-soul.com/files/hcidump_hcitool_connect
This is the output from hcidump -X -V when a "hidd
--connect
00:07:61:1B:50:9B" is run:
http://www.feline-soul.com/files/hcidump_hidd_connect
My hcid configuration file:
http://www
.feline-soul.com/files/hcid.conf
My rfcomm configuration file (I have never altered it)
http://w
ww.feline-soul.com/files/rfcomm.conf
The daemon hidd is indeed running:
root 4750 0.0 0.0 5040 484 ? Ss Jul26
0:00 /usr/bin/hidd --server
Pertainent modules are as follows:
hidp 17152 3
l2cap 22408 14 rfcomm,hidp
usbhid 37024 0
bluetooth 47268 12 rfcomm,hidp,l2cap,hci_usb
hci_usb 15892 6
I have taken the batteries out of the keyboard, pressed the
gray button,
pressed the button on my hub, unplugged and plugged the hub
back in, and
sacrificed AOL Cd's on an alter in the name of Tux.
I am never prompted for a pin (and i don't know what it
would be if i was). I
have taken the kde pin handler line out of the config and
still i am never
asked for a pin. Truthfully, i don' t even know if i should
be or not.
What else can i provide?
Thank you again,
Bearcat M. Sandor
On Friday 28 July 2006 03:46 in an email titled "Re:
[Bluez-users] can't
connect EPOX Keyboard BT-KB01B" Marcel Holtmann wrote:
>Hi Nils,
>
>> > No such luck for me yet. Strangly the hcitool
does not allow the auth
>> > option for me. I had to do a hciconfig
/dev/usb/hci0 auth to turn the
>> > auth on the hub. Auth is now on but the
keyboard still doesn't connect.
>> > As usuall nothing is reported in the syslogs.
>> >
>> > Do i need to turn on the auth for the keyboard
too (is that even an
>> > option)?
>>
>> No, the keyboard will require that automatically.
>
>actually only the Apple keyboards require this and this
is wrong
>according to the HID specification. The host must make
the decision to
>authenticate and switch on encryption.
>
>Regards
>
>Marcel
--
Bearcat M. Sandor
Bearcat feline-soul.com
ICQ: 6628727
MSN: bearcatsandorhotmail.com
Yahoo: bearcatsandor
AIM: bearcatmsandor
Jabber: bearcatsandorjabber.org
------------------------------------------------------------
-------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the
chance to share your
opinions on IT & business topics through brief surveys
-- and earn cash
http://www.techsay.com/default.
php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-userslists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
|
|
| can't connect EPOX Keyboard BT-KB01B |
|
2006-07-28 18:21:36 |
Hi Bearcat,
On 7/28/06, Bearcat M. Sandor <Bearcatfeline-soul.com> wrote:
> Thank you again for the help so far. I have placed a
bunch of output files on
> my server for your viewing pleasure, instead of giving
you large outputs in
> an email body.
Sorry, but I couldn't see any of those files (all links end
up with
"404 Not found" error). Can you send those files
inline so we can see
what's happening, please?
Regards,
-- Ulisses
------------------------------------------------------------
-------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the
chance to share your
opinions on IT & business topics through brief surveys
-- and earn cash
http://www.techsay.com/default.
php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-userslists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
|
|
| can't connect EPOX Keyboard BT-KB01B |
|
2006-07-28 18:38:57 |
Sorry about that. I meant to say files/bluetooth on all
those.
They are here: http://ww
w.feline-soul.com/files/bluetooth/
Here the are inline:
http://w
ww.feline-soul.net/files/bluetooth/hcidev_-a_output:
hci0: Type: USB
BD Address: 00:07:61:1C:9F 3 ACL
MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:8886937 acl:584808 sco:0 events:79865 errors:0
TX bytes:392377 acl:192 sco:0 commands:77281 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x000000
Service Classes: Unspecified
Device Class: Miscellaneous,
HCI Ver: 1.1 (0x1) HCI Rev: 0x34e LMP Ver: 1.1 (0x1) LMP
Subver: 0x34e
Manufacturer: Cambridge Silicon Radio (10)
------------------------------------------------------------
--------
http://www.feline-soul.net/files/bluetooth/hci
dump_hcitool_connect HCI
sniffer - Bluetooth packet analyzer ver 1.31
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:07:61:1B:50:9B ptype 0xcc18 rswitch 0x01
clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x0c ncmd 1
Error: Command Disallowed
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
< HCI Command: Read RSSI (0x05|0x0005) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Read RSSI (0x05|0x0005) ncmd 1
status 0x00 handle 41 rssi 0
< HCI Command: Role Discovery (0x02|0x0009) plen 2
handle 41
> HCI Event: Command Complete (0x0e) plen 7
Role Discovery (0x02|0x0009) ncmd 1
0000: 00 29 00 00
.)..
> HCI Event: Connect Complete (0x03) plen 11
status 0x04 handle 0 bdaddr 00:07:61:1B:50:9B type ACL
encrypt 0x00
Error: Page Timeout
------------------------------------------------------------
--------
http://www.feline-soul.net/files/bluetooth/hcidum
p_hidd_connect
HCI sniffer - Bluetooth packet analyzer ver 1.31
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 41 mode 0x00 interval 0
Mode: Active
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 41 mode 0x02 interval 126
Mode: Sniff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:07:61:1B:50:9B ptype 0xcc18 rswitch 0x01
clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x04 handle 0 bdaddr 00:07:61:1B:50:9B type ACL
encrypt 0x00
Error: Page Timeout
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:07:61:1B:50:9B ptype 0xcc18 rswitch 0x01
clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x04 handle 0 bdaddr 00:07:61:1B:50:9B type ACL
encrypt 0x00
Error: Page Timeout
-----------------------------------------------------------
http://www.feline-soul.net/files/bluetooth/rfcomm.conf
#
# RFCOMM configuration file.
#
rfcomm0 {
# Automatically bind the device at startup
bind no;
# Bluetooth address of the device
device 11:22:33:44:55:66;
# RFCOMM channel for the connection
channel 1;
# Description of the connection
comment "Example Bluetooth device";
---------------------------------------------
That's it. The commands i used to get these sets of output
are in the
previous email.
Thanks all,
Bearcat
> Hi Bearcat,
>
> On 7/28/06, Bearcat M. Sandor <Bearcatfeline-soul.com> wrote:
>> Thank you again for the help so far. I have placed
a bunch of output
files on
>> my server for your viewing pleasure, instead of
giving you large
outputs
>> in
>> an email body.
>
> Sorry, but I couldn't see any of those files (all
links end up with "404
Not found" error). Can you send those files inline so
we can see what's
happening, please?
>
> Regards,
>
> -- Ulisses
>
>
------------------------------------------------------------
-------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the
chance to share your
opinions on IT & business topics through brief surveys
-- and earn cash
http://www.techsay.com/default.
php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-userslists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
|
|
| can't connect EPOX Keyboard BT-KB01B |
|
2006-07-29 06:35:01 |
An update I just recieved my logitech headset and i'm
making some headway.
It's actually giving my some clues about the keyboard
I did the following:
1. in the hcid.conf file i changed the passkey to
"0000"
2. Reloaded bluez.
3. hiconfig up and down
4. hold power button on headset
5. hcitool scan
I see 00:0D:44:4F:37:72 Logitech HS03 V04
then a hidd --connect 00:0D:44:4F:37:72 or a hcitool cc
00:0D:44:4F:37:72
starts the connection.
In hcidump i see:
< HCI Command: Create Connection (0x01|0x0005) plen 13
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: PIN Code Request (0x16) plen 6
> HCI Event: Connect Complete (0x03) plen 11
I am never prompted for a pin code. I even made a script
which contains:
echo "PIN:0000"
but no pin is ever entered.
Thus kdebluetooth sees the headset but it is never
connected.
The keyboard on the other hand is never seen at all. A
hcitool scan does not
show it, nor does it ever appear in kdebluetooth. However,
the mouse is
never seen in a scan either, yet it works perfectly and is
seen in
kdebluetooth.
I'm very confused.
Bearcat
On Friday 28 July 2006 12:38 in an email titled "Re:
[Bluez-users] can't
connect EPOX Keyboard BT-KB01B" Bearcat M. Sandor
wrote:
>Sorry about that. I meant to say files/bluetooth on all
those.
>
>They are here: http://ww
w.feline-soul.com/files/bluetooth/
>
>Here the are inline:
>http://w
ww.feline-soul.net/files/bluetooth/hcidev_-a_output:
>hci0: Type: USB
> BD Address: 00:07:61:1C:9F3 ACL
MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:8886937 acl:584808 sco:0 events:79865 errors:0
> TX bytes:392377 acl:192 sco:0 commands:77281 errors:0
> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'BlueZ (0)'
> Class: 0x000000
> Service Classes: Unspecified
> Device Class: Miscellaneous,
> HCI Ver: 1.1 (0x1) HCI Rev: 0x34e LMP Ver: 1.1 (0x1)
LMP Subver: 0x34e
>Manufacturer: Cambridge Silicon Radio (10)
>--------------------------------------------------------
------------
>http://www.feline-soul.net/files/bluetooth/hci
dump_hcitool_connect HCI
>sniffer - Bluetooth packet analyzer ver 1.31
>device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Create Connection (0x01|0x0005) plen
13
> bdaddr 00:07:61:1B:50:9B ptype 0xcc18 rswitch 0x01
clkoffset 0x0000
>Packet type: DM1 DM3 DM5 DH1 DH3 DH5
>
>> HCI Event: Command Status (0x0f) plen 4
>
> Create Connection (0x01|0x0005) status 0x0c ncmd 1
> Error: Command Disallowed
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>< HCI Command: Read RSSI (0x05|0x0005) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Read RSSI (0x05|0x0005) ncmd 1
> status 0x00 handle 41 rssi 0
>< HCI Command: Role Discovery (0x02|0x0009) plen 2
> handle 41
>
>> HCI Event: Command Complete (0x0e) plen 7
>
> Role Discovery (0x02|0x0009) ncmd 1
> 0000: 00 29 00 00
.)..
>
>> HCI Event: Connect Complete (0x03) plen 11
>
> status 0x04 handle 0 bdaddr 00:07:61:1B:50:9B type
ACL encrypt 0x00
>Error: Page Timeout
>--------------------------------------------------------
------------
>http://www.feline-soul.net/files/bluetooth/hcidum
p_hidd_connect
>HCI sniffer - Bluetooth packet analyzer ver 1.31
>device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
>
>> HCI Event: Mode Change (0x14) plen 6
>
> status 0x00 handle 41 mode 0x00 interval 0
> Mode: Active
>
>> HCI Event: Mode Change (0x14) plen 6
>
> status 0x00 handle 41 mode 0x02 interval 126
> Mode: Sniff
>< HCI Command: Create Connection (0x01|0x0005) plen
13
> bdaddr 00:07:61:1B:50:9B ptype 0xcc18 rswitch 0x01
clkoffset 0x0000
>Packet type: DM1 DM3 DM5 DH1 DH3 DH5
>
>> HCI Event: Command Status (0x0f) plen 4
>
> Create Connection (0x01|0x0005) status 0x00 ncmd 1
>
>> HCI Event: Connect Complete (0x03) plen 11
>
> status 0x04 handle 0 bdaddr 00:07:61:1B:50:9B type
ACL encrypt 0x00
>Error: Page Timeout
>< HCI Command: Create Connection (0x01|0x0005) plen
13
> bdaddr 00:07:61:1B:50:9B ptype 0xcc18 rswitch 0x01
clkoffset 0x0000
>Packet type: DM1 DM3 DM5 DH1 DH3 DH5
>
>> HCI Event: Command Status (0x0f) plen 4
>
> Create Connection (0x01|0x0005) status 0x00 ncmd 1
>
>> HCI Event: Connect Complete (0x03) plen 11
>
> status 0x04 handle 0 bdaddr 00:07:61:1B:50:9B type
ACL encrypt 0x00
>Error: Page Timeout
>--------------------------------------------------------
---
>http://www.feline-soul.net/files/bluetooth/rfcomm.conf
>#
># RFCOMM configuration file.
>#
>
>rfcomm0 {
> # Automatically bind the device at startup
> bind no;
>
> # Bluetooth address of the device
> device 11:22:33:44:55:66;
>
> # RFCOMM channel for the connection
> channel 1;
>
> # Description of the connection
> comment "Example Bluetooth device";
>---------------------------------------------
>
>That's it. The commands i used to get these sets of
output are in the
>previous email.
>
>Thanks all,
>
>Bearcat
>
>> Hi Bearcat,
>>
>> On 7/28/06, Bearcat M. Sandor <Bearcatfeline-soul.com> wrote:
>>> Thank you again for the help so far. I have
placed a bunch of output
>
>files on
>
>>> my server for your viewing pleasure, instead of
giving you large
>
>outputs
>
>>> in
>>> an email body.
>>
>> Sorry, but I couldn't see any of those files (all
links end up with "404
>
>Not found" error). Can you send those files inline
so we can see what's
>happening, please?
>
>> Regards,
>>
>> -- Ulisses
--
Bearcat M. Sandor
Bearcatfeline-soul.com
ICQ: 6628727
MSN: bearcatsandorhotmail.com
Yahoo: bearcatsandor
AIM: bearcatmsandor
Jabber: bearcatsandorjabber.org
------------------------------------------------------------
-------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the
chance to share your
opinions on IT & business topics through brief surveys
-- and earn cash
http://www.techsay.com/default.
php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-userslists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
|
|
| Connecting a Logitech Mobile
Traveler...progress |
|
2006-07-29 21:20:25 |
Well, i'm still trying to get my keyboard working.
However, i am making progress on the headset.
When i turn the headset on and hold down the powerbutton i
get the flashing
red/blue light as the manual says.
As i stated below i changed the passkey in
/etc/bluetooth/hcid.conf to "0000".
The manual for the headset says "The PIN/passkey is:
0000"
When i do a hidd --connect 00:0D:44:4F:37:72 or a hcitool cc
00:0D:44:4F:37:72
i see the following in hcidump now:
< HCI Command: Create Connection (0x01|0x0005) plen 13
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: PIN Code Request (0x16) plen 6
< HCI Command: PIN Code Request Negative Reply
(0x01|0x000e) plen 6
> HCI Event: Command Complete (0x0e) plen 10
> HCI Event: Connect Complete (0x03) plen 11
At the console the message "Can't get device
information: Permission denied"
and kdebluetoth reports "Pairing not allowed"
That's progress, i think. I STILL am never asked for a
passcode. I can
run /usr/lib/kdebluetooth/kdebluetooth manually, so i know
the dialog is
operational, it just never comes up. I made a script that
contains
echo "PIN:0000"
and i have tried supplying that as my pass_helper, but that
is never utilized
either.
I've tried commenting out the line: #passkey
"0000";
but that does not force a pin_helper to appear or be run. I
have tried
entering 0000 on the keyboard but that doesn't do anything
either. Do i need
to adjust something in my rfcomm.conf file? (seen here
http://www.feline-soul.com/files/bluetooth/rfcomm.conf
)?
My hcid.conf file can be viewed here:
http://www.feline-soul.com/files/bluetooth/hcid.conf
Ideas?
Bearcat
On Saturday 29 July 2006 00:35 in an email titled "Re:
[Bluez-users] can't
connect EPOX Keyboard BT-KB01B" Bearcat M. Sandor
wrote:
>An update I just recieved my logitech headset and i'm
making some headway.
>It's actually giving my some clues about the keyboard
>
>I did the following:
>
>1. in the hcid.conf file i changed the passkey to
"0000"
>2. Reloaded bluez.
>3. hiconfig up and down
>4. hold power button on headset
>5. hcitool scan
>I see 00:0D:44:4F:37:72 Logitech HS03 V04
>then a hidd --connect 00:0D:44:4F:37:72 or a hcitool cc
00:0D:44:4F:37:72
>starts the connection.
>
>In hcidump i see:
>
>< HCI Command: Create Connection (0x01|0x0005) plen
13
>
>> HCI Event: Command Status (0x0f) plen 4
>> HCI Event: PIN Code Request (0x16) plen 6
>> HCI Event: Connect Complete (0x03) plen 11
>
>I am never prompted for a pin code. I even made a script
which contains:
> echo "PIN:0000"
>but no pin is ever entered.
>
>Thus kdebluetooth sees the headset but it is never
connected.
>
>The keyboard on the other hand is never seen at all. A
hcitool scan does not
>show it, nor does it ever appear in kdebluetooth.
However, the mouse is
>never seen in a scan either, yet it works perfectly and
is seen in
>kdebluetooth.
>
>I'm very confused.
>
>Bearcat
>
>
>On Friday 28 July 2006 12:38 in an email titled
"Re: [Bluez-users] can't
>
>connect EPOX Keyboard BT-KB01B" Bearcat M. Sandor
wrote:
>>Sorry about that. I meant to say files/bluetooth on
all those.
>>
>>They are here: http://ww
w.feline-soul.com/files/bluetooth/
>>
>>Here the are inline:
>>http://w
ww.feline-soul.net/files/bluetooth/hcidev_-a_output:
>>hci0: Type: USB
>> BD Address: 00:07:61:1C:9F3 ACL
MTU: 192:8 SCO MTU: 64:8
>> UP RUNNING PSCAN ISCAN
>> RX bytes:8886937 acl:584808 sco:0 events:79865
errors:0
>> TX bytes:392377 acl:192 sco:0 commands:77281
errors:0
>> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
>> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
>> Link policy: RSWITCH HOLD SNIFF PARK
>> Link mode: SLAVE ACCEPT
>> Name: 'BlueZ (0)'
>> Class: 0x000000
>> Service Classes: Unspecified
>> Device Class: Miscellaneous,
>> HCI Ver: 1.1 (0x1) HCI Rev: 0x34e LMP Ver: 1.1
(0x1) LMP Subver: 0x34e
>>Manufacturer: Cambridge Silicon Radio (10)
>>----------------------------------------------------
----------------
>>http://www.feline-soul.net/files/bluetooth/hci
dump_hcitool_connect HCI
>>sniffer - Bluetooth packet analyzer ver 1.31
>>device: hci0 snap_len: 1028 filter:
0xffffffffffffffff
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Create Connection (0x01|0x0005)
plen 13
>> bdaddr 00:07:61:1B:50:9B ptype 0xcc18 rswitch
0x01 clkoffset 0x0000
>>Packet type: DM1 DM3 DM5 DH1 DH3 DH5
>>
>>> HCI Event: Command Status (0x0f) plen 4
>>
>> Create Connection (0x01|0x0005) status 0x0c ncmd
1
>> Error: Command Disallowed
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>< HCI Command: Read RSSI (0x05|0x0005) plen 2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Read RSSI (0x05|0x0005) ncmd 1
>> status 0x00 handle 41 rssi 0
>>< HCI Command: Role Discovery (0x02|0x0009) plen
2
>> handle 41
>>
>>> HCI Event: Command Complete (0x0e) plen 7
>>
>> Role Discovery (0x02|0x0009) ncmd 1
>> 0000: 00 29 00 00
.)..
>>
>>> HCI Event: Connect Complete (0x03) plen 11
>>
>> status 0x04 handle 0 bdaddr 00:07:61:1B:50:9B
type ACL encrypt 0x00
>>Error: Page Timeout
>>----------------------------------------------------
----------------
>>http://www.feline-soul.net/files/bluetooth/hcidum
p_hidd_connect
>>HCI sniffer - Bluetooth packet analyzer ver 1.31
>>device: hci0 snap_len: 1028 filter:
0xffffffffffffffff
>>
>>> HCI Event: Mode Change (0x14) plen 6
>>
>> status 0x00 handle 41 mode 0x00 interval 0
>> Mode: Active
>>
>>> HCI Event: Mode Change (0x14) plen 6
>>
>> status 0x00 handle 41 mode 0x02 interval 126
>> Mode: Sniff
>>< HCI Command: Create Connection (0x01|0x0005)
plen 13
>> bdaddr 00:07:61:1B:50:9B ptype 0xcc18 rswitch
0x01 clkoffset 0x0000
>>Packet type: DM1 DM3 DM5 DH1 DH3 DH5
>>
>>> HCI Event: Command Status (0x0f) plen 4
>>
>> Create Connection (0x01|0x0005) status 0x00 ncmd
1
>>
>>> HCI Event: Connect Complete (0x03) plen 11
>>
>> status 0x04 handle 0 bdaddr 00:07:61:1B:50:9B
type ACL encrypt 0x00
>>Error: Page Timeout
>>< HCI Command: Create Connection (0x01|0x0005)
plen 13
>> bdaddr 00:07:61:1B:50:9B ptype 0xcc18 rswitch
0x01 clkoffset 0x0000
>>Packet type: DM1 DM3 DM5 DH1 DH3 DH5
>>
>>> HCI Event: Command Status (0x0f) plen 4
>>
>> Create Connection (0x01|0x0005) status 0x00 ncmd
1
>>
>>> HCI Event: Connect Complete (0x03) plen 11
>>
>> status 0x04 handle 0 bdaddr 00:07:61:1B:50:9B
type ACL encrypt 0x00
>>Error: Page Timeout
>>----------------------------------------------------
-------
>>http://www.feline-soul.net/files/bluetooth/rfcomm.conf
>>#
>># RFCOMM configuration file.
>>#
>>
>>rfcomm0 {
>> # Automatically bind the device at startup
>> bind no;
>>
>> # Bluetooth address of the device
>> device 11:22:33:44:55:66;
>>
>> # RFCOMM channel for the connection
>> channel 1;
>>
>> # Description of the connection
>> comment "Example Bluetooth device";
>>---------------------------------------------
>>
>>That's it. The commands i used to get these sets of
output are in the
>>previous email.
>>
>>Thanks all,
>>
>>Bearcat
>>
>>> Hi Bearcat,
>>>
>>> On 7/28/06, Bearcat M. Sandor <Bearcatfeline-soul.com> wrote:
>>>> Thank you again for the help so far. I have
placed a bunch of output
>>
>>files on
>>
>>>> my server for your viewing pleasure,
instead of giving you large
>>
>>outputs
>>
>>>> in
>>>> an email body.
>>>
>>> Sorry, but I couldn't see any of those files
(all links end up with "404
>>
>>Not found" error). Can you send those files
inline so we can see what's
>>happening, please?
>>
>>> Regards,
>>>
>>> -- Ulisses
--
Bearcat M. Sandor
Bearcatfeline-soul.com
ICQ: 6628727
MSN: bearcatsandorhotmail.com
Yahoo: bearcatsandor
AIM: bearcatmsandor
Jabber: bearcatsandorjabber.org
------------------------------------------------------------
-------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the
chance to share your
opinions on IT & business topics through brief surveys
-- and earn cash
http://www.techsay.com/default.
php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-userslists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
|
|
[1-5]
|
|
![http://w ww.feline-soul.net/files/bluetooth/hcidev_-a_output:](http://www.feline-soul.net/files/bluetooth/hcid.conf<i
mg
src='http://www.archivesat.com/images/blushing.gif'>http://w
ww.feline-soul.net/files/bluetooth/hcid.conf:</a>
#
# HCI daemon configuration file.
#
# HCId options
options {
# Automatically initialize new devices
autoinit yes;
# Security Manager mode
# none - Security manager disabled
# auto - Use local PIN for incoming connections
# user - Always ask user for a PIN
#
security user;
# Pairing mode
# none - Pairing disabled
# multi - Allow pairing with already paired devices
# once - Pair once and deny successive attempts
pairing multi;
# Default PIN code for incoming connections
passkey "BlueZ";
# PIN helper
#pin_helper /usr/bin/bluepin;
#pin_helper /etc/bluetooth/cbpinscript;
pin_helper /usr/lib/kdebluetooth/kbluepin;
}
# Default settings for HCI devices
device {
# Local device name
# %d - device id
# %h - host name
name "BlueZ (%d)";
# Local device class
class 0x100000;
# Default packet type
#pkt_type DH1,DM1,HV1;
# Inquiry and Page scan
iscan enable; pscan enable;
# Default link mode
# none - no specific policy
# accept - always accept incoming connections
# master - become master on incoming connections,
# deny role switch on outgoing connections
lm accept;
# Default link policy
# none - no specific policy
# rswitch - allow role switch
# hold - allow hold mode
# sniff - allow sniff mode
# park - allow park mode
lp rswitch,hold,sniff,park;
}
------------------------------------------------------------
-------
<a
href=){kind=link}
 plen 6
status 0x00 handle 41 mode 0x00 interval 0
Mode: Active
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 41 mode 0x02 interval 126
Mode: Sniff
------------------------------------------------------------
-----
<a
href=){kind=link}
![http://w ww.feline-soul.net/files/bluetooth/hcidev_-a_output:](http://www.feline-soul.net/files/bluetooth/hcid.conf<i
mg
src='http://www.archivesat.com/images/blushing.gif'>http://w
ww.feline-soul.net/files/bluetooth/hcid.conf:</a>
>#
># HCI daemon configuration file.
>#
>
># HCId options
>options {
> # Automatically initialize new devices
> autoinit yes;
>
> # Security Manager mode
> # none - Security manager disabled
> # auto - Use local PIN for incoming connections
> # user - Always ask user for a PIN
> #
> security user;
>
> # Pairing mode
> # none - Pairing disabled
> # multi - Allow pairing with already paired devices
> # once - Pair once and deny successive attempts
> pairing multi;
>
> # Default PIN code for incoming connections
> passkey "BlueZ";
>
> # PIN helper
> #pin_helper /usr/bin/bluepin;
> #pin_helper /etc/bluetooth/cbpinscript;
> pin_helper /usr/lib/kdebluetooth/kbluepin;
>}
>
># Default settings for HCI devices
>device {
> # Local device name
> # %d - device id
> # %h - host name
> name "BlueZ (%d)";
>
> # Local device class
> class 0x100000;
>
> # Default packet type
> #pkt_type DH1,DM1,HV1;
>
> # Inquiry and Page scan
> iscan enable; pscan enable;
>
> # Default link mode
> # none - no specific policy
> # accept - always accept incoming connections
> # master - become master on incoming connections,
> # deny role switch on outgoing connections
> lm accept;
>
> # Default link policy
> # none - no specific policy
> # rswitch - allow role switch
> # hold - allow hold mode
> # sniff - allow sniff mode
> # park - allow park mode
> lp rswitch,hold,sniff,park;
>}
>--------------------------------------------------------
-----------
><a
href=){kind=link}
 plen 6
>
> status 0x00 handle 41 mode 0x00 interval 0
> Mode: Active
>
>> HCI Event: Mode Change (0x14) plen 6
>
> status 0x00 handle 41 mode 0x02 interval 126
> Mode: Sniff
>--------------------------------------------------------
---------
><a
href=){kind=link}
![http://w ww.feline-soul.net/files/bluetooth/hcidev_-a_output:](http://www.feline-soul.net/files/bluetooth/hcid.conf<i
mg
src='http://www.archivesat.com/images/blushing.gif'>http://w
ww.feline-soul.net/files/bluetooth/hcid.conf:</a>
>>#
>># HCI daemon configuration file.
>>#
>>
>># HCId options
>>options {
>> # Automatically initialize new devices
>> autoinit yes;
>>
>> # Security Manager mode
>> # none - Security manager disabled
>> # auto - Use local PIN for incoming connections
>> # user - Always ask user for a PIN
>> #
>> security user;
>>
>> # Pairing mode
>> # none - Pairing disabled
>> # multi - Allow pairing with already paired
devices
>> # once - Pair once and deny successive attempts
>> pairing multi;
>>
>> # Default PIN code for incoming connections
>> passkey "BlueZ";
>>
>> # PIN helper
>> #pin_helper /usr/bin/bluepin;
>> #pin_helper /etc/bluetooth/cbpinscript;
>> pin_helper /usr/lib/kdebluetooth/kbluepin;
>>}
>>
>># Default settings for HCI devices
>>device {
>> # Local device name
>> # %d - device id
>> # %h - host name
>> name "BlueZ (%d)";
>>
>> # Local device class
>> class 0x100000;
>>
>> # Default packet type
>> #pkt_type DH1,DM1,HV1;
>>
>> # Inquiry and Page scan
>> iscan enable; pscan enable;
>>
>> # Default link mode
>> # none - no specific policy
>> # accept - always accept incoming connections
>> # master - become master on incoming connections,
>> # deny role switch on outgoing
connections
>> lm accept;
>>
>> # Default link policy
>> # none - no specific policy
>> # rswitch - allow role switch
>> # hold - allow hold mode
>> # sniff - allow sniff mode
>> # park - allow park mode
>> lp rswitch,hold,sniff,park;
>>}
>>----------------------------------------------------
---------------
>><a
href=){kind=link}
 plen 6
>>
>> status 0x00 handle 41 mode 0x00 interval 0
>> Mode: Active
>>
>>> HCI Event: Mode Change (0x14) plen 6
>>
>> status 0x00 handle 41 mode 0x02 interval 126
>> Mode: Sniff
>>----------------------------------------------------
-------------
>><a
href=){kind=link}