USB ISSCBTA dongle

Subj doesn't work on 6-CURRENT.

Dec 15 13:47:41 blade kernel: ubt0: vendor 0x1131
ISSTrainingA, rev 
1.10/3.73, addr 2
Dec 15 13:47:41 blade kernel: ubt0: vendor 0x1131
ISSTrainingA, rev 
1.10/3.73, addr 2
Dec 15 13:47:41 blade kernel: ubt0: Interface 0 endpoints: 
interrupt=0x81, bulk-in=0x82, bulk-out=0x2
Dec 15 13:47:41 blade kernel: ubt0: Interface 1 (alt.config
5) 
endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=49;
nframes=6, 
buffer size=294
Dec 15 13:47:47 blade kernel:
ng_hci_process_command_timeout: ubt0hci - 
unable to complete HCI command OGF=0x3, OCF=0x3. Timeout
Dec 15 13:47:48 blade root: /etc/rc.d/bluetooth: ERROR:
Unable to setup 
Bluetooth stack for device ubt0

blade# ngctl types
There are 8 total types:
       Type name   Number of living nodes
       ---------   ----------------------
          socket       1
      btsock_l2c       1
  btsock_l2c_raw       1
  btsock_hci_raw       1
           l2cap       0
             hci       0
             ubt       1
           ether       2
blade# ngctl status ubt0
ngctl: send msg: No such file or directory

I would like to help debugging this problem if someone is up
to that. 
Anyone? 

PS: Maybe there's a better code for that at 7-CURRENT?

-- 
Sphinx of black quartz judge my vow!
_______________________________________________
freebsd-bluetoothfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-blu
etooth
To unsubscribe, send any mail to
"freebsd-bluetooth-unsubscribefreebsd.org"

Volodymyr,

> Dec 15 13:47:41 blade kernel: ubt0: vendor 0x1131
ISSTrainingA, rev 
> 1.10/3.73, addr 2
> Dec 15 13:47:41 blade kernel: ubt0: vendor 0x1131
ISSTrainingA, rev 
> 1.10/3.73, addr 2
> Dec 15 13:47:41 blade kernel: ubt0: Interface 0
endpoints: 
> interrupt=0x81, bulk-in=0x82, bulk-out=0x2
> Dec 15 13:47:41 blade kernel: ubt0: Interface 1
(alt.config 5) 
> endpoints: isoc-in=0x83, isoc-out=0x3;
wMaxPacketSize=49; nframes=6, 
> buffer size=294
> Dec 15 13:47:47 blade kernel:
ng_hci_process_command_timeout: ubt0hci - 
> unable to complete HCI command OGF=0x3, OCF=0x3.
Timeout
> Dec 15 13:47:48 blade root: /etc/rc.d/bluetooth: ERROR:
Unable to setup 
> Bluetooth stack for device ubt0

hmm... strange... it should work. the very first device
initialization 
command (reset) is failing (timeout).

you could try to comment

  $ -n $hci reset 
                 > /dev/null 2>&1 || return 1

in the /etc/rc.d/bluetooth and see if this helps (btw, you
need to 
unplug and re-plug the device after that). if this does not
help, then i 
would suspect some sort of usb problem.

[...]

> I would like to help debugging this problem if someone
is up to that. 
> Anyone? 
> 
> PS: Maybe there's a better code for that at 7-CURRENT?

no, the code is pretty much the same.

thanks,
max
_______________________________________________
freebsd-bluetoothfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-blu
etooth
To unsubscribe, send any mail to
"freebsd-bluetooth-unsubscribefreebsd.org"

On Mon, 18 Dec 2006, Maksim Yevmenkin wrote:

> hmm... strange... it should work. the very first device
initialization command
> (reset) is failing (timeout).
>
> you could try to comment
>
>  $ -n $hci reset 
>                 > /dev/null 2>&1 || return 1
>
> in the /etc/rc.d/bluetooth and see if this helps (btw,
you need to unplug and
> re-plug the device after that). if this does not help,
then i would suspect
> some sort of usb problem.

By the way there was a very similar problem in NetBSD with
Bluetooth USB
(builtin) and EHCI controllers, something to do with the
data toggle
getting out of sync for short transfers I think - a fix was
applied by
Matthias Drochner to ehci.c recently for that.

iain
_______________________________________________
freebsd-bluetoothfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-blu
etooth
To unsubscribe, send any mail to
"freebsd-bluetooth-unsubscribefreebsd.org"