CVSNT Control Panel not working

On Tue, 30 May 2006 13:07:21 +0200,
"Webmaster33"
<webmaster33gmail.com> wrote:

>> In the logs the errors are always shown when a file
is opened in
>> system32 but immediately after it succeeds when the
file is found in
>> the app dir, where it should be located.
>
>Yes, I noted this, and I posted a second message
>correcting my mistake.
>
>
>> Can you say which installer you used to install
cvsnt? The MSI one
>> from MarchHare or the Innosetup one from my or
Oliver's sites?
>
>Currently the Innosetup one is installed.
>I see no CVSNT CP in windows control panel.
>Only in the Start menu installed program folder.
>
>
>> Key:
>>
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVer
sion\Control
>> Panel\Cpls
>> 
>> Value: CVSNT
>
>Yes, correctly it is set to:
C:\winprg\cvsnt\cvsnt.cpl

Long shot,
if you doubleclick the file C:\winprg\cvsnt\simcpl.cpl,
what happens?

Once upon a time this file was registered as the control
panel app,
but then it stopped working and I changed the inno installer
to
register cvsnt.cpl instead and immediately I had the cp
there all the
time.

HTH

/Bo
(Bo Berglund, developer in Sweden)
_______________________________________________
cvsnt mailing list
cvsntcvsnt.org
h
ttp://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt

> if you doubleclick the file
C:\winprg\cvsnt\simcpl.cpl, what happens?

Unfortunately, nothing.
Just a busy icon for a second, and nothing else.


W33


*********** REPLY SEPARATOR  ***********
On 2006.05.30. at 13:43 Bo Berglund wrote:

> On Tue, 30 May 2006 13:07:21 +0200,
"Webmaster33"
> <webmaster33gmail.com> wrote:
> 
> >> In the logs the errors are always shown when a
file is opened in
> >> system32 but immediately after it succeeds
when the file is found in
> >> the app dir, where it should be located.
> >
> >Yes, I noted this, and I posted a second message
> >correcting my mistake.
> >
> >
> >> Can you say which installer you used to
install cvsnt? The MSI one
> >> from MarchHare or the Innosetup one from my or
Oliver's sites?
> >
> >Currently the Innosetup one is installed.
> >I see no CVSNT CP in windows control panel.
> >Only in the Start menu installed program folder.
> >
> >
> >> Key:
> >>
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVer
sion\Control
> >> Panel\Cpls
> >> 
> >> Value: CVSNT
> >
> >Yes, correctly it is set to:
C:\winprg\cvsnt\cvsnt.cpl
> 
> Long shot,
> if you doubleclick the file
C:\winprg\cvsnt\simcpl.cpl, what happens?
> 
> Once upon a time this file was registered as the
control panel app,
> but then it stopped working and I changed the inno
installer to
> register cvsnt.cpl instead and immediately I had the cp
there all the
> time.
> 
> HTH
> 
> /Bo
> (Bo Berglund, developer in Sweden)
> _______________________________________________
> cvsnt mailing list
> cvsntcvsnt.org
> h
ttp://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt

*********** END REPLIED MESSAGE  ***********


_______________________________________________
cvsnt mailing list
cvsntcvsnt.org
h
ttp://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt

Bo Berglund wrote:
> Once upon a time this file was registered as the
control panel app,
> but then it stopped working and I changed the inno
installer to
> register cvsnt.cpl instead and immediately I had the cp
there all the
> time.
>
You must use simcpl as the control panel app - if that
isn't working the 
innosetup installer is doing something wrong... it's not
surprising that 
the cvsnt.cpl won't start up in that kind of configuration.

simcpl is required to let the control panel pick up its
runtime 
dependencies.  If that isn't working then the control panel
won't work 
either.

Tony
_______________________________________________
cvsnt mailing list
cvsntcvsnt.org
h
ttp://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt