heartbeat srpm compile problem

Hi

I'm trying to compile the heartbeat 2.0.7 srpm from the
.dev.centos
site on rhel 4 es. But I'm getting the following error:

checking for ucd-snmp/snmp.h... no
checking net-snmp/net-snmp-config.h usability... yes
checking net-snmp/net-snmp-config.h presence... yes
checking for net-snmp/net-snmp-config.h... yes
checking for net-snmp-config... /usr/bin/net-snmp-config
checking for special snmp libraries... -L/usr/lib -lnetsnmp
-lcrypto -lelf -lm
checking snmp libraries: -lxml2 -lc -luuid -lrt -ldl
-L/usr/lib
-lnetsnmp -lcrypto -lelf -lm... ok
checking snmp libraries: -lxml2 -lc -luuid -lrt -ldl
-L/usr/lib
-lnetsnmpagent -lnetsnmpmibs -lnetsnmphelpers -lnetsnmp
-lsensors -ldl
-lrpm -lrpmio -lpopt -lbz2 -lz -lcrypto -lelf -lm
-L/usr/lib/lib
-lwrap... configure: error: cannot link with requested
libraries
(-lxml2 -lc -luuid -lrt -ldl -L/usr/lib -lnetsnmpagent
-lnetsnmpmibs
-lnetsnmphelpers -lnetsnmp -lsensors -ldl -lrpm -lrpmio
-lpopt -lbz2
-lz -lcrypto -lelf -lm -L/usr/lib/lib -lwrap). Reported
errors follow:
/usr/bin/ld: cannot find -lsensors
collect2: ld returned 1 exit status
error: Bad exit status from /var/tmp/rpm-tmp.69680 (%build)


RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.69680 (%build)
[rootha1 SPECS]# vi heartbeat.spec

Can anyone please tell me whats wrong with this, and if I'm
missing
any packages. I've installed all the net-snmp packages
except
php-snmp.

Thanks in advance
Dan
_______________________________________________
CentOS-devel mailing list
CentOS-develcentos.org
http://lists.centos.org/mailman/listinfo/centos-devel

On Thu, 2006-09-28 at 10:26 +0100, Dan Track wrote:
> Hi
> 
> I'm trying to compile the heartbeat 2.0.7 srpm from the
.dev.centos
> site on rhel 4 es. But I'm getting the following error:
> 
> checking for ucd-snmp/snmp.h... no
> checking net-snmp/net-snmp-config.h usability... yes
> checking net-snmp/net-snmp-config.h presence... yes
> checking for net-snmp/net-snmp-config.h... yes
> checking for net-snmp-config...
/usr/bin/net-snmp-config
> checking for special snmp libraries... -L/usr/lib
-lnetsnmp -lcrypto -lelf -lm
> checking snmp libraries: -lxml2 -lc -luuid -lrt -ldl
-L/usr/lib
> -lnetsnmp -lcrypto -lelf -lm... ok
> checking snmp libraries: -lxml2 -lc -luuid -lrt -ldl
-L/usr/lib
> -lnetsnmpagent -lnetsnmpmibs -lnetsnmphelpers -lnetsnmp
-lsensors -ldl
> -lrpm -lrpmio -lpopt -lbz2 -lz -lcrypto -lelf -lm
-L/usr/lib/lib
> -lwrap... configure: error: cannot link with requested
libraries
> (-lxml2 -lc -luuid -lrt -ldl -L/usr/lib -lnetsnmpagent
-lnetsnmpmibs
> -lnetsnmphelpers -lnetsnmp -lsensors -ldl -lrpm -lrpmio
-lpopt -lbz2
> -lz -lcrypto -lelf -lm -L/usr/lib/lib -lwrap). Reported
errors follow:
> /usr/bin/ld: cannot find -lsensors
> collect2: ld returned 1 exit status
> error: Bad exit status from /var/tmp/rpm-tmp.69680
(%build)
> 
> 
> RPM build errors:
> Bad exit status from /var/tmp/rpm-tmp.69680 (%build)
> [rootha1 SPECS]# vi heartbeat.spec
> 
> Can anyone please tell me whats wrong with this, and if
I'm missing
> any packages. I've installed all the net-snmp packages
except
> php-snmp.

Looks like you are missing the sensors library (-lsensors)
which would
be the file named:

/usr/lib/libsensors.so

(whenever you see -l***** in a gcc statment then it means
look for a
file named lib*****.so ... that is, add lib to the front and
.so to the
end of the name that follows -l and that is the library.
Then search for
that file)

This RPM owns the file /usr/lib/libsensors.so:

lm_sensors-devel-2.8.7-2.40.3

SO ... it seems that there is a requirement for
lm_sensors-devel that is
not stated in the SRPM.

Install the latest version of lm_sensors-devel and start the
build
again.

Thanks,
Johnny Hughes


_______________________________________________
CentOS-devel mailing list
CentOS-develcentos.org
http://lists.centos.org/mailman/listinfo/centos-devel

On 9/28/06, Johnny Hughes <mailing-listshughesjr.com> wrote:
> On Thu, 2006-09-28 at 10:26 +0100, Dan Track wrote:
> > Hi
> >
> > I'm trying to compile the heartbeat 2.0.7 srpm
from the .dev.centos
> > site on rhel 4 es. But I'm getting the following
error:
> >
> > checking for ucd-snmp/snmp.h... no
> > checking net-snmp/net-snmp-config.h usability...
yes
> > checking net-snmp/net-snmp-config.h presence...
yes
> > checking for net-snmp/net-snmp-config.h... yes
> > checking for net-snmp-config...
/usr/bin/net-snmp-config
> > checking for special snmp libraries... -L/usr/lib
-lnetsnmp -lcrypto -lelf -lm
> > checking snmp libraries: -lxml2 -lc -luuid -lrt
-ldl -L/usr/lib
> > -lnetsnmp -lcrypto -lelf -lm... ok
> > checking snmp libraries: -lxml2 -lc -luuid -lrt
-ldl -L/usr/lib
> > -lnetsnmpagent -lnetsnmpmibs -lnetsnmphelpers
-lnetsnmp -lsensors -ldl
> > -lrpm -lrpmio -lpopt -lbz2 -lz -lcrypto -lelf -lm
-L/usr/lib/lib
> > -lwrap... configure: error: cannot link with
requested libraries
> > (-lxml2 -lc -luuid -lrt -ldl -L/usr/lib
-lnetsnmpagent -lnetsnmpmibs
> > -lnetsnmphelpers -lnetsnmp -lsensors -ldl -lrpm
-lrpmio -lpopt -lbz2
> > -lz -lcrypto -lelf -lm -L/usr/lib/lib -lwrap).
Reported errors follow:
> > /usr/bin/ld: cannot find -lsensors
> > collect2: ld returned 1 exit status
> > error: Bad exit status from /var/tmp/rpm-tmp.69680
(%build)
> >
> >
> > RPM build errors:
> > Bad exit status from /var/tmp/rpm-tmp.69680
(%build)
> > [rootha1 SPECS]# vi heartbeat.spec
> >
> > Can anyone please tell me whats wrong with this,
and if I'm missing
> > any packages. I've installed all the net-snmp
packages except
> > php-snmp.
>
> Looks like you are missing the sensors library
(-lsensors) which would
> be the file named:
>
> /usr/lib/libsensors.so
>
> (whenever you see -l***** in a gcc statment then it
means look for a
> file named lib*****.so ... that is, add lib to the
front and .so to the
> end of the name that follows -l and that is the
library. Then search for
> that file)
>
> This RPM owns the file /usr/lib/libsensors.so:
>
> lm_sensors-devel-2.8.7-2.40.3
>
> SO ... it seems that there is a requirement for
lm_sensors-devel that is
> not stated in the SRPM.
>
> Install the latest version of lm_sensors-devel and
start the build
> again.
>

Hi Jonny,

Thanks for the info. It worked great.

Thanks
Dan
_______________________________________________
CentOS-devel mailing list
CentOS-develcentos.org
http://lists.centos.org/mailman/listinfo/centos-devel