hi,
things like that work with fw1 but not with ng fp3 version,
you should upgrade to ng x.
cheers
reinhard
** My mobile email is powered by Nokia Mobile Email
solutions **
> -----Original Message-----
> From: Mailing list for discussion of Firewall-1 on
behalf of Matthew Melbourne
> Received: Thu Jun 29 20:35:37 CEST 2006
> To: FW-1-MAILINGLIST AMADEUS.US.CHECKPOINT.COM
> Subject: [FW-1] NG FP3 and H.323 Video Conferencing
>
> Hi,
>
> Has anyone successfully configured H.323 through NG FP3
for Video
> Conferencing. I have a Cisco Gatekeeper/IPIPGW which is
sited on the
> internal network. Endpoints register with this device
using its private
> address.
>
> This object is defined as a host and has a static NAT
translation to a
> real-world IP address. Can CP inspect the H.323 call
setup messages and
> change any IP addresses in the H.323 payload (e.g.
H.225 call setup
> messages)? To allow this Gatekeeper to talk to other
Gatekeepers, UDP/1719
> and TCP/1720 need to be permitted in both directions.
>
> Therefore, would something like the following be
sufficient:
>
> src=gk-ipipgw dst=any service=H323;H323_ras
> src=any dst=gk-ipipgw service=H323;H323_ras
>
> Will the firewall open the ports associated with the
media streams
> dynamically?
>
> Cheers,
>
> Matt
>
> --
> Matthew Melbourne
>
> =================================================
> To set vacation, Out-Of-Office, or away messages,
> send an email to LISTSERV amadeus.us.checkpoint.com
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http:
//www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your
> subscription options, email
> fw-1-owner ts.checkpoint.com
> =================================================
>
>
>
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV amadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner ts.checkpoint.com
=================================================
|