|
List Info
Thread: IPSO 4.x and Checkpoint NGx combination explaination needed
|
|
| IPSO 4.x and Checkpoint NGx combination
explaination needed |
|
2006-09-21 16:48:31 |
All,
I am not a Product Engineer but I am, unfortunately, doing
this at work because the
PE dude at my work place is doing stuffs that I think is
wrong so here we go.
I've been reading through Nokia IPSO 4.1 release notes,
specifically IPSO 4.1
build 013, build 016 and build 019 and I found the the
following:
1- On page 19 of IPSO 4.1 build 013 release note, it
specifically states that this ipso
build supports NGx R60. I do not see anywhere in the
documentation that specifically
states that it supports NGx R61.
2- On page 24 of IPSO 4.1 build 016 release note, it
specifically states that this
ipso build supports NGx R60. Again, I do not see anywhere
in the documentation
that specifically states that it supports NGx R61.
3- On page 28 of the IPSO 4.1 build 019 release note, it
specifically states that it
supports both NGx R60 and NGx R61
From what I am reading in the release notes, it seems to
me that both IPSO
build 013 and IPSO 4.1 build 016 are NOT certified to run
Checkpoint NGx R61, and
that only IPSO 4.1 build 019 is certified to run NGx R61.
Therefore, from reading the Nokia release notes, the
combination of IPSO 4.1
build 016 with Checkpoint NGx R61 is NOT a support
configuration.
Is that the correct interpretation? Thanks
cisco4ng
---------------------------------
Get your own web address for just $1.99/1st yr. We'll help.
Yahoo! Small Business.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV amadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
|
|
| IPSO 4.x and Checkpoint NGx combination
explaination needed |
|
2006-09-21 18:02:15 |
Well if it matters the EA2 code, "NGX R62", runs
perfect on IPSO 4.1 bx
hth.
cisco4ng wrote:
> All,
>
> I am not a Product Engineer but I am, unfortunately,
doing this at work because the
> PE dude at my work place is doing stuffs that I
think is wrong so here we go.
>
> I've been reading through Nokia IPSO 4.1 release
notes, specifically IPSO 4.1
> build 013, build 016 and build 019 and I found the
the following:
>
> 1- On page 19 of IPSO 4.1 build 013 release note, it
specifically states that this ipso
> build supports NGx R60. I do not see anywhere in the
documentation that specifically
> states that it supports NGx R61.
>
> 2- On page 24 of IPSO 4.1 build 016 release note, it
specifically states that this
> ipso build supports NGx R60. Again, I do not see
anywhere in the documentation
> that specifically states that it supports NGx R61.
>
> 3- On page 28 of the IPSO 4.1 build 019 release note,
it specifically states that it
> supports both NGx R60 and NGx R61
>
> From what I am reading in the release notes, it
seems to me that both IPSO
> build 013 and IPSO 4.1 build 016 are NOT certified to
run Checkpoint NGx R61, and
> that only IPSO 4.1 build 019 is certified to run NGx
R61.
>
> Therefore, from reading the Nokia release notes, the
combination of IPSO 4.1
> build 016 with Checkpoint NGx R61 is NOT a support
configuration.
>
> Is that the correct interpretation? Thanks
>
> cisco4ng
>
>
> ---------------------------------
> Get your own web address for just $1.99/1st yr. We'll
help. Yahoo! Small Business.
>
> =================================================
> To set vacation, Out-Of-Office, or away messages,
> send an email to LISTSERVamadeus.us.checkpoint.com
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http:
//www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your
> subscription options, email
> fw-1-ownerts.checkpoint.com
> =================================================
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
|
|
| IPSO 4.x and Checkpoint NGx combination
explaination needed |
|
2006-09-21 18:11:56 |
NGX R62 runs great on IPSO 4.1 I would think so would R61.
Maybe you should set ti up in your lab play with it.
Nokia:57> show ipsrd version
Ipsrd version :
ipsrd-IPSO-4.1-BUILD016-05.19.2006-23:06:58
Started at : Mon Sep 18 19:32:06 EDT 2006
Current time : Thu Sep 21 14:05:55 EDT 2006
Up time : 2 days 18 hrs 33 mins 49 secs
Nokia:58> show package active
1) /opt/CPinfo-10
Check Point CPinfo (Thu Dec 22 14:03:00 IST 2005
Build 911000031)
2) /opt/CPsuite-R62
Check Point VPN-1 Pro/Express NGX R62 (Sat Jul 8
07:08:57 IDT 2006 Build 618000058)
cisco4ng <cisco4ngYAHOO.COM> wrote:
All,
I am not a Product Engineer but I am, unfortunately, doing
this at work because the
PE dude at my work place is doing stuffs that I think is
wrong so here we go.
I've been reading through Nokia IPSO 4.1 release notes,
specifically IPSO 4.1
build 013, build 016 and build 019 and I found the the
following:
1- On page 19 of IPSO 4.1 build 013 release note, it
specifically states that this ipso
build supports NGx R60. I do not see anywhere in the
documentation that specifically
states that it supports NGx R61.
2- On page 24 of IPSO 4.1 build 016 release note, it
specifically states that this
ipso build supports NGx R60. Again, I do not see anywhere in
the documentation
that specifically states that it supports NGx R61.
3- On page 28 of the IPSO 4.1 build 019 release note, it
specifically states that it
supports both NGx R60 and NGx R61
From what I am reading in the release notes, it seems to me
that both IPSO
build 013 and IPSO 4.1 build 016 are NOT certified to run
Checkpoint NGx R61, and
that only IPSO 4.1 build 019 is certified to run NGx R61.
Therefore, from reading the Nokia release notes, the
combination of IPSO 4.1
build 016 with Checkpoint NGx R61 is NOT a support
configuration.
Is that the correct interpretation? Thanks
cisco4ng
---------------------------------
Get your own web address for just $1.99/1st yr. We'll help.
Yahoo! Small Business.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone
calls. Great rates starting at 1¢/min.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
|
|
| IPSO 4.x and Checkpoint NGx combination
explaination needed |
|
2006-09-21 18:30:59 |
> Well if it matters the EA2 code, "NGX R62",
runs perfect on IPSO 4.1 bx
> hth.
>
Define 'perfect' ; did you examine the zillion states a
sw product as
cp can be in ?
M.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
|
|
| IPSO 4.x and Checkpoint NGx combination
explaination needed |
|
2006-09-21 18:33:03 |
you guys seem to miss the point. It is not a matter of
whether it works. It's a
matter of support and legal liablity. Heck, I can make NG
Feature Pack 3 run on
IPSO 4.1 but it is not a support configuration Sure, I
can make IPSO4.1 runs on
the Nokia IP650 but it is not a support configuration
either.
Therefore, I am looking for a definitive answer.
cisco4ng
joe smith <interrupt_handle_this_00100YAHOO.COM> wrote:
NGX R62 runs great on IPSO 4.1 I would think so would R61.
Maybe you should set ti up in your lab play with it.
Nokia:57> show ipsrd version
Ipsrd version : ipsrd-IPSO-4.1-BUILD016-05.19.2006-23:06:58
Started at : Mon Sep 18 19:32:06 EDT 2006
Current time : Thu Sep 21 14:05:55 EDT 2006
Up time : 2 days 18 hrs 33 mins 49 secs
Nokia:58> show package active
1) /opt/CPinfo-10
Check Point CPinfo (Thu Dec 22 14:03:00 IST 2005 Build
911000031)
2) /opt/CPsuite-R62
Check Point VPN-1 Pro/Express NGX R62 (Sat Jul 8 07:08:57
IDT 2006 Build 618000058)
cisco4ng wrote:
All,
I am not a Product Engineer but I am, unfortunately, doing
this at work because the
PE dude at my work place is doing stuffs that I think is
wrong so here we go.
I've been reading through Nokia IPSO 4.1 release notes,
specifically IPSO 4.1
build 013, build 016 and build 019 and I found the the
following:
1- On page 19 of IPSO 4.1 build 013 release note, it
specifically states that this ipso
build supports NGx R60. I do not see anywhere in the
documentation that specifically
states that it supports NGx R61.
2- On page 24 of IPSO 4.1 build 016 release note, it
specifically states that this
ipso build supports NGx R60. Again, I do not see anywhere in
the documentation
that specifically states that it supports NGx R61.
3- On page 28 of the IPSO 4.1 build 019 release note, it
specifically states that it
supports both NGx R60 and NGx R61
From what I am reading in the release notes, it seems to me
that both IPSO
build 013 and IPSO 4.1 build 016 are NOT certified to run
Checkpoint NGx R61, and
that only IPSO 4.1 build 019 is certified to run NGx R61.
Therefore, from reading the Nokia release notes, the
combination of IPSO 4.1
build 016 with Checkpoint NGx R61 is NOT a support
configuration.
Is that the correct interpretation? Thanks
cisco4ng
---------------------------------
Get your own web address for just $1.99/1st yr. We'll help.
Yahoo! Small Business.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone
calls. Great rates starting at 1¢/min.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
---------------------------------
Stay in the know. Pulse on the new Yahoo.com. Check it out.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
|
|
| IPSO 4.x and Checkpoint NGx combination
explaination needed |
|
2006-09-21 18:45:14 |
Who would run FP3 on 4.1, only an idiot.
cisco4ng <cisco4ngYAHOO.COM> wrote: you guys seem to
miss the point. It is not a matter of whether it works.
It's a
matter of support and legal liablity. Heck, I can make NG
Feature Pack 3 run on
IPSO 4.1 but it is not a support configuration Sure, I can
make IPSO4.1 runs on
the Nokia IP650 but it is not a support configuration
either.
Therefore, I am looking for a definitive answer.
cisco4ng
joe smith wrote:
NGX R62 runs great on IPSO 4.1 I would think so would R61.
Maybe you should set ti up in your lab play with it.
Nokia:57> show ipsrd version
Ipsrd version : ipsrd-IPSO-4.1-BUILD016-05.19.2006-23:06:58
Started at : Mon Sep 18 19:32:06 EDT 2006
Current time : Thu Sep 21 14:05:55 EDT 2006
Up time : 2 days 18 hrs 33 mins 49 secs
Nokia:58> show package active
1) /opt/CPinfo-10
Check Point CPinfo (Thu Dec 22 14:03:00 IST 2005 Build
911000031)
2) /opt/CPsuite-R62
Check Point VPN-1 Pro/Express NGX R62 (Sat Jul 8 07:08:57
IDT 2006 Build 618000058)
cisco4ng wrote:
All,
I am not a Product Engineer but I am, unfortunately, doing
this at work because the
PE dude at my work place is doing stuffs that I think is
wrong so here we go.
I've been reading through Nokia IPSO 4.1 release notes,
specifically IPSO 4.1
build 013, build 016 and build 019 and I found the the
following:
1- On page 19 of IPSO 4.1 build 013 release note, it
specifically states that this ipso
build supports NGx R60. I do not see anywhere in the
documentation that specifically
states that it supports NGx R61.
2- On page 24 of IPSO 4.1 build 016 release note, it
specifically states that this
ipso build supports NGx R60. Again, I do not see anywhere in
the documentation
that specifically states that it supports NGx R61.
3- On page 28 of the IPSO 4.1 build 019 release note, it
specifically states that it
supports both NGx R60 and NGx R61
From what I am reading in the release notes, it seems to me
that both IPSO
build 013 and IPSO 4.1 build 016 are NOT certified to run
Checkpoint NGx R61, and
that only IPSO 4.1 build 019 is certified to run NGx R61.
Therefore, from reading the Nokia release notes, the
combination of IPSO 4.1
build 016 with Checkpoint NGx R61 is NOT a support
configuration.
Is that the correct interpretation? Thanks
cisco4ng
---------------------------------
Get your own web address for just $1.99/1st yr. We'll help.
Yahoo! Small Business.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone
calls. Great rates starting at 1¢/min.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
---------------------------------
Stay in the know. Pulse on the new Yahoo.com. Check it out.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
---------------------------------
Do you Yahoo!?
Get on board. You're invited to try the new Yahoo! Mail.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
|
|
| IPSO 4.x and Checkpoint NGx combination
explaination needed |
|
2006-09-21 18:49:20 |
well for those of us men that dont wear skirts to work  why wouold
you make FP3 run on IPSO 4.1, doesnt make sense. Like
installing linux on a Nokia appliance.
cisco4ng <cisco4ngYAHOO.COM> wrote: you guys seem to
miss the point. It is not a matter of whether it works.
It's a
matter of support and legal liablity. Heck, I can make NG
Feature Pack 3 run on
IPSO 4.1 but it is not a support configuration Sure, I can
make IPSO4.1 runs on
the Nokia IP650 but it is not a support configuration
either.
Therefore, I am looking for a definitive answer.
cisco4ng
joe smith wrote:
NGX R62 runs great on IPSO 4.1 I would think so would R61.
Maybe you should set ti up in your lab play with it.
Nokia:57> show ipsrd version
Ipsrd version : ipsrd-IPSO-4.1-BUILD016-05.19.2006-23:06:58
Started at : Mon Sep 18 19:32:06 EDT 2006
Current time : Thu Sep 21 14:05:55 EDT 2006
Up time : 2 days 18 hrs 33 mins 49 secs
Nokia:58> show package active
1) /opt/CPinfo-10
Check Point CPinfo (Thu Dec 22 14:03:00 IST 2005 Build
911000031)
2) /opt/CPsuite-R62
Check Point VPN-1 Pro/Express NGX R62 (Sat Jul 8 07:08:57
IDT 2006 Build 618000058)
cisco4ng wrote:
All,
I am not a Product Engineer but I am, unfortunately, doing
this at work because the
PE dude at my work place is doing stuffs that I think is
wrong so here we go.
I've been reading through Nokia IPSO 4.1 release notes,
specifically IPSO 4.1
build 013, build 016 and build 019 and I found the the
following:
1- On page 19 of IPSO 4.1 build 013 release note, it
specifically states that this ipso
build supports NGx R60. I do not see anywhere in the
documentation that specifically
states that it supports NGx R61.
2- On page 24 of IPSO 4.1 build 016 release note, it
specifically states that this
ipso build supports NGx R60. Again, I do not see anywhere in
the documentation
that specifically states that it supports NGx R61.
3- On page 28 of the IPSO 4.1 build 019 release note, it
specifically states that it
supports both NGx R60 and NGx R61
From what I am reading in the release notes, it seems to me
that both IPSO
build 013 and IPSO 4.1 build 016 are NOT certified to run
Checkpoint NGx R61, and
that only IPSO 4.1 build 019 is certified to run NGx R61.
Therefore, from reading the Nokia release notes, the
combination of IPSO 4.1
build 016 with Checkpoint NGx R61 is NOT a support
configuration.
Is that the correct interpretation? Thanks
cisco4ng
---------------------------------
Get your own web address for just $1.99/1st yr. We'll help.
Yahoo! Small Business.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone
calls. Great rates starting at 1¢/min.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
---------------------------------
Stay in the know. Pulse on the new Yahoo.com. Check it out.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
---------------------------------
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
|
|
| IPSO 4.x and Checkpoint NGx combination
explaination needed |
|
2006-09-21 20:06:57 |
Sorry I wasnt able to examine all "zillion"
states. but i dont think CP checks all those states before
releasing code to public.
Mark Elsen <mark.elsenGMAIL.COM> wrote: >
Well if it matters the EA2 code, "NGX R62", runs
perfect on IPSO 4.1 bx
> hth.
>
Define 'perfect' ; did you examine the zillion states a sw
product as
cp can be in ?
M.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
---------------------------------
Do you Yahoo!?
Get on board. You're invited to try the new Yahoo! Mail.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
|
|
| IPSO 4.x and Checkpoint NGx combination
explaination needed |
|
2006-09-21 20:30:40 |
Before you start name calling such as calling me an idiot, I
think it is a good idea
for you to check with Nokia R&D before you start
calling people name. They
can tell you a few things that you may not know about IPSO
4.1 and NG
Feature Pack 3.
There are many times I have to do things against my wishes
just because that's what
the customer wanted to do even though I know that it is
not the corrective action.
That being said, one thing that I've in my ten years of
IT services is that "customers
are always right".
joe smith <interrupt_handle_this_00100YAHOO.COM> wrote:
Who would run FP3 on 4.1, only an idiot.
cisco4ng wrote: you guys seem to miss the point. It is not a
matter of whether it works. It's a
matter of support and legal liablity. Heck, I can make NG
Feature Pack 3 run on
IPSO 4.1 but it is not a support configuration Sure, I can
make IPSO4.1 runs on
the Nokia IP650 but it is not a support configuration
either.
Therefore, I am looking for a definitive answer.
cisco4ng
joe smith wrote:
NGX R62 runs great on IPSO 4.1 I would think so would R61.
Maybe you should set ti up in your lab play with it.
Nokia:57> show ipsrd version
Ipsrd version : ipsrd-IPSO-4.1-BUILD016-05.19.2006-23:06:58
Started at : Mon Sep 18 19:32:06 EDT 2006
Current time : Thu Sep 21 14:05:55 EDT 2006
Up time : 2 days 18 hrs 33 mins 49 secs
Nokia:58> show package active
1) /opt/CPinfo-10
Check Point CPinfo (Thu Dec 22 14:03:00 IST 2005 Build
911000031)
2) /opt/CPsuite-R62
Check Point VPN-1 Pro/Express NGX R62 (Sat Jul 8 07:08:57
IDT 2006 Build 618000058)
cisco4ng wrote:
All,
I am not a Product Engineer but I am, unfortunately, doing
this at work because the
PE dude at my work place is doing stuffs that I think is
wrong so here we go.
I've been reading through Nokia IPSO 4.1 release notes,
specifically IPSO 4.1
build 013, build 016 and build 019 and I found the the
following:
1- On page 19 of IPSO 4.1 build 013 release note, it
specifically states that this ipso
build supports NGx R60. I do not see anywhere in the
documentation that specifically
states that it supports NGx R61.
2- On page 24 of IPSO 4.1 build 016 release note, it
specifically states that this
ipso build supports NGx R60. Again, I do not see anywhere in
the documentation
that specifically states that it supports NGx R61.
3- On page 28 of the IPSO 4.1 build 019 release note, it
specifically states that it
supports both NGx R60 and NGx R61
From what I am reading in the release notes, it seems to me
that both IPSO
build 013 and IPSO 4.1 build 016 are NOT certified to run
Checkpoint NGx R61, and
that only IPSO 4.1 build 019 is certified to run NGx R61.
Therefore, from reading the Nokia release notes, the
combination of IPSO 4.1
build 016 with Checkpoint NGx R61 is NOT a support
configuration.
Is that the correct interpretation? Thanks
cisco4ng
---------------------------------
Get your own web address for just $1.99/1st yr. We'll help.
Yahoo! Small Business.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone
calls. Great rates starting at 1¢/min.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
---------------------------------
Stay in the know. Pulse on the new Yahoo.com. Check it out.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
---------------------------------
Do you Yahoo!?
Get on board. You're invited to try the new Yahoo! Mail.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
---------------------------------
All-new Yahoo! Mail - Fire up a more powerful email and get
things done faster.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
|
|
| IPSO 4.x and Checkpoint NGx combination
explaination needed |
|
2006-09-22 05:13:46 |
Going back to the initial question and stepping out of the
high school
teenager name calling...
I would say if it is a matter of legal liability, stick to
what the
documentation says and install R61 ONLY on an IPSO version
which release
notes ensure it runs over. That way if something goes wrong
you have
something official to back you up.
On 9/21/06, joe smith <interrupt_handle_this_00100yahoo.com> wrote:
>
> Sorry I wasnt able to examine all "zillion"
states. but i dont think CP
> checks all those states before releasing code to
public.
>
> Mark Elsen <mark.elsenGMAIL.COM> wrote: >
Well if it matters the EA2
> code, "NGX R62", runs perfect on IPSO 4.1
bx
> > hth.
> >
>
> Define 'perfect' ; did you examine the zillion states
a sw product as
> cp can be in ?
>
> M.
>
> =================================================
> To set vacation, Out-Of-Office, or away messages,
> send an email to LISTSERVamadeus.us.checkpoint.com
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http:
//www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your
> subscription options, email
> fw-1-ownerts.checkpoint.com
> =================================================
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Get on board. You're invited to try the new Yahoo!
Mail.
>
> =================================================
> To set vacation, Out-Of-Office, or away messages,
> send an email to LISTSERVamadeus.us.checkpoint.com
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http:
//www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your
> subscription options, email
> fw-1-ownerts.checkpoint.com
> =================================================
>
--
Sergio Alvarez
(506)8301342
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERVamadeus.us.checkpoint.com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http:
//www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-ownerts.checkpoint.com
=================================================
|
|
|
|