Re: Pix 515 alway reboot after upgrade ios

Verify whether the IOS image ; is corrupted.

toomy bagaskara <tommy_bagaskarayahoo.com> wrote:

Hi,

Please help to resolve this problem, i can starting up my pix 515, the error is pix always reboot.

Copyright 1985-1998 Phoenix Technologies Ltd.
All Rights Reserved

Build Time: 04/27/99 17:08:34
Polaris BIOS Version 0.09
CPU = Pentium with MMX  200 MHz
640K System RAM Passed
63M Extended RAM Passed
0512K Cache SRAM Passed
System BIOS shadowed
U
Cisco Secure PIX Firewall BIOS (4.0) #0: Thu Mar  2 22:59:20 PST 2000 Platform PIX-515
Flash=i28F640J5 0x300

Use BREAK or ESC to interrupt flash boot.
Use SPACE to begin flash boot immediately.
Reading 1962496 bytes of image from flash.
imgsum_config: sumval(0x19d1) md5(0x96a6bc99 0xfdcbe539 0x38a4f658 0x28d53468)
imgsum_verify: chksum(0x0  ; ) md5(0xd9f5d1e0 0x5cface19 0x8366a887 0x86e6f9e0)
Checksum verification on compression loader failed.

 

Rebooting....

---

It's here! Your new message!
Get new email alerts with the free Yahoo! Toolbar.

You should always check the hardware requirement for
the upgrade. Upgrading to 7.x requires memory upgrade.
Secondly, always verify checksum after you download
the new IOS image.