List Info

Thread: DSP prooblems




DSP prooblems
user name
2007-01-30 14:07:37
I'm seeing this in my event logs and also when I look at my
dsp stats I can see that many of them are not being used. I
have 4 PRIs and 2 PVDM2-64s on a 2851 with IOS 12.4-3g. What
are some thing I can try to get these DSPs working. I have
channels on my PRIs that are not being used because of
this.
 
Thanks,
Jason

_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip

Re: DSP prooblems
user name
2007-01-30 14:08:56
Sorry, here are some of the error logs as well for my
previous post. Do I have flaky DSPs?
 
Jan 30 12:17:42.943 CST: mbrd_e1t1_vic_connect: setup
failed
Jan 30 12:17:42.947 CST: flex_dsprm_vtsp_set_codec: voice
tdm connect failed(0/0
/1/0/2/8)
Jan 30 12:56:05.368 CST: %DSMP-3-DSP_TIMEOUT: DSP timeout on
DSP 1/2:3: event 0x
6, DSMP timed out, while waiting for statistics from the
DSP. DSMP State = S_DSM
P_COLLECTING_STATS, chnl info(1, 2, 3)
Jan 30 13:14:34.121 CST: mbrd_e1t1_vic_connect: setup
failed
Jan 30 13:14:34.121 CST: flex_dsprm_vtsp_set_codec: voice
tdm connect failed(0/1
/21/0/2/1)
Jan 30 13:37:46.529 CST: No dsps found either locally or
globally!

________________________________

From: cisco-voip-bouncespuck.nether.net on behalf
of Wydra, Jason
Sent: Tue 1/30/2007 2:07 PM
To: cisco-voippuck.nether.net
Subject: [cisco-voip] DSP prooblems



I'm seeing this in my event logs and also when I look at my
dsp stats I can see that many of them are not being used. I
have 4 PRIs and 2 PVDM2-64s on a 2851 with IOS 12.4-3g. What
are some thing I can try to get these DSPs working. I have
channels on my PRIs that are not being used because of
this.

Thanks,
Jason

_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip



_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip

Re: DSP prooblems
user name
2007-01-30 16:30:51
If I bounce MGCP my problem seems to clear up but then
slowly I see PRI channels that don't get used again. I'm
using perfmon to look at the utilization of my channels. Any
ideas?

________________________________

From: Wydra, Jason
Sent: Tue 1/30/2007 2:08 PM
To: Wydra, Jason; cisco-voippuck.nether.net
Subject: RE: [cisco-voip] DSP prooblems


Sorry, here are some of the error logs as well for my
previous post. Do I have flaky DSPs?
 
Jan 30 12:17:42.943 CST: mbrd_e1t1_vic_connect: setup
failed
Jan 30 12:17:42.947 CST: flex_dsprm_vtsp_set_codec: voice
tdm connect failed(0/0
/1/0/2/8)
Jan 30 12:56:05.368 CST: %DSMP-3-DSP_TIMEOUT: DSP timeout on
DSP 1/2:3: event 0x
6, DSMP timed out, while waiting for statistics from the
DSP. DSMP State = S_DSM
P_COLLECTING_STATS, chnl info(1, 2, 3)
Jan 30 13:14:34.121 CST: mbrd_e1t1_vic_connect: setup
failed
Jan 30 13:14:34.121 CST: flex_dsprm_vtsp_set_codec: voice
tdm connect failed(0/1
/21/0/2/1)
Jan 30 13:37:46.529 CST: No dsps found either locally or
globally!

________________________________

From: cisco-voip-bouncespuck.nether.net on behalf
of Wydra, Jason
Sent: Tue 1/30/2007 2:07 PM
To: cisco-voippuck.nether.net
Subject: [cisco-voip] DSP prooblems



I'm seeing this in my event logs and also when I look at my
dsp stats I can see that many of them are not being used. I
have 4 PRIs and 2 PVDM2-64s on a 2851 with IOS 12.4-3g. What
are some thing I can try to get these DSPs working. I have
channels on my PRIs that are not being used because of
this.

Thanks,
Jason

_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip



_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip

[1-3]

about | contact  Other archives ( Real Estate discussion Medical topics )