Re: Gatekeeper CAC + Zone Management Question

On 1/16/07, charles george < cisco1.charlesgmail.com">cisco1.charlesgmail.com> wrote:

no i do not believe you can. What the command i gave you would do is query the amnount of available bandwidth before saying whther or not the call can be made.

&nbsp;

so the call is always good quality, or atleast the bandwidth you specified for each call

&nbsp;

On 1/16/07, embeleco < embelecogmail.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">embelecogmail.com> wrote:

Thanks Charles, but how does it work? Let say that the customer has only 1 Gatekeeper managing 4 local zones (one gateway in each zone).. how do you configure the bandwidth per two zone? For example:

1. From Zone 1 to Zone 2 the customer would like to have only 4 concurrent calls because of bw constraints.

2. From Zone 1 to Zone 3 the customer would like 10 calls

3. From Zone 1 to Zone 4 the customer would like 8 calls

4. From Zone 2 to Zone 3 the customer would like 5 calls

5. From Zone 2 to Zone 4 the customer would like 10 calls

6. From Zone 3 to Zone 4 the customer would like 5 calls..

Can  I be that specific on the gatekeeper? Because the "bandwidth interzone&quot; command would restrict bandwidth for local zone to all other zones.. but not to specific zones.. or I am missing something?

Please advise.

-J

On 1/15/07, charles george < cisco1.charlesgmail.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">cisco1.charlesgmail.com > wrote:

bandwidth check destination

 

this will check amonut of bandwidth before answering a request for a call. if enough allowed,if not declined

 

hope this helps

&nbsp;

On 1/14/07, embeleco < embelecogmail.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)"> embelecogmail.com > wrote:

Hi.

Currently a customer have 4 VoIP Gateways register to a gatekeeper. Each of the VoIP Gateways are in a different zone ( i.e. zones) on the gatekeeper. Is there a way to specify CallAdmision control between 2 specific sites?

For example customer wants from Site-1 to Site-2 3 calls and from Site-1 to Site-3 4 calls and from Site-1 to Site-4 1 call.

Can we be this granular with the CAC on the gatekeeper? I know we can do CAC from one zone to all remaining zones but is there a command to be granular on zone per zone..&nbsp; If not what is the best practice in order to accomplish the above requirement? Currently most of the sites are connected in a fully mesh topology but some of them are not directly connected.

Any suggestion?

Thanks in advanced.

_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)"> cisco-voippuck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip