The 'debug isdn q931' is a very low-impact debug. You can
safely
run it without fear of rebooting your router 
-Ryan
On Jan 31, 2007, at 11:34 AM, kevin k wrote:
i am seeing only "debug" so far. so is there any
regular and safe
"show" command? it would be very cool if so.
On 1/31/07, Voll, Scott <Scott.Voll wesd.org> wrote:
Debug isdn q931 will give you a lot of information for this
kind of
problem.
Scott
From: cisco-voip-bouncespuck.nether.net
[mailto:cisco-voip-
bouncespuck.nether.net] On Behalf Of kevin k
Sent: Wednesday, January 31, 2007 6:30 AM
To: cisco-voippuck.nether.net
Subject: [cisco-voip] voice gateway - trace a call
i am fairly new on voip. but reading to get better.
i have user complaining that they get busy signal but only a
few
(less thatn 10) are on the phone. they have a pri line. so
this is
what i did to trouble shoot.
i associate myself to their partition and css.
the gateway is in the same same partition.
i make a call and execute "show voice port
summary"
is there any way i can see which line i am using? even
debug but i
want to stay away from debug.
thanks
_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip
|