7941G and 7961G phone models

Going forward buy nothing but 79X1 models.  They have better
resolution,
802.af Power, and more memory.  The additional memory is
required if you
convert to SIP.  I have used these phones and the are fine,
no problems,
just better looking than the 79X0 models. 

-----Original Message-----
From: cisco-voip-bouncespuck.nether.net
[mailto:cisco-voip-bouncespuck.nether.net] On Behalf
Of Candace Holman
Sent: Tuesday, March 21, 2006 3:37 PM
To: cisco-voippuck.nether.net
Subject: [cisco-voip] 7941G and 7961G phone models

What is the minimum CallManager version that these phone
work with?  Any
problems with 3.3.5+ or 4.x ?

Has anyone got feedback, good or bad, on these models?

thanks,
Candace

_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip


This email may contain proprietary and confidential
information for the sole use of the intended recipient. 
Any review, retransmission, dissemination, or other use of
this information by persons or entities other than 
the intended recipient is prohibited. If you are not the
intended recipient, please contact the sender and 
delete all copies. To the extent that opinions are expressed
in this message, they are not necessarily the 
opinions of Sentinel Technologies or any of its affiliates,
employees, directors, officers or shareholders.

_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip