|
List Info
Thread: Intl Calls with Verizon in Philadelphia area
|
|
| Intl Calls with Verizon in Philadelphia
area |
 
United States |
2007-08-31 07:59:50 |
|
I am not able to send International
calls through our PRI's at a location outside of Philly. Local and
LD work fine. debugs at the router show the number being sent to
the telco are fine.
Debug ISDN q931
Calling Party Number i = 0x2181, '215664XXXX'
Plan:ISDN,
Type:National
Called Party
Number i = 0x91, '011448458787000'
I found a CCO TAC case where this exact
problem is described and addressed by changing the calling plan type from
national to unknown using the following command under the D channel interface.
isdn map address .* plan isdn type unknown
This did in fact change the plan type but
I was unable to complete local, LD and Intl after adding this.
Any suggestions?
Carlos
|
| Re: Intl Calls with Verizon in
Philadelphia area |
|
2007-08-31 08:51:10 |
|
isdn map address 011* plan isdn type unknown
On 8/31/07, CarlosOrtiz bayviewfinancial.com">CarlosOrtizbayviewfinancial.com < CarlosOrtizbayviewfinancial.com">
CarlosOrtizbayviewfinancial.com> wrote:
I am not able to send International
calls through our PRI's at a location outside of Philly. Local and
LD work fine. debugs at the router show the number being sent to
the telco are fine.
Debug ISDN q931
Calling Party Number i = 0x2181, '215664XXXX'
Plan:ISDN,
Type:National
Called Party
Number i = 0x91, '011448458787000'
I found a CCO TAC case where this exact
problem is described and addressed by changing the calling plan type from
national to unknown using the following command under the D channel interface.
isdn map address .* plan isdn type unknown
This did in fact change the plan type but
I was unable to complete local, LD and Intl after adding this.
Any suggestions?
Carlos
_______________________________________________
cisco-voip mailing list
puck.nether.net">cisco-voippuck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
| Re: Intl Calls with Verizon in
Philadelphia area |
|
2007-08-31 08:53:26 |
|
actually i didnt read your entire email. you need to make both plan and isdn unknown for international since you are sending the leading '011'.
;isdn map address 011.* plan unknown type unknown
On 8/31/07, Justin Steinberg < jsteinberggmail.com">jsteinberggmail.com> wrote:
isdn map address 011* plan isdn type unknown
On 8/31/07, CarlosOrtizbayviewfinancial.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">
CarlosOrtizbayviewfinancial.com < CarlosOrtizbayviewfinancial.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">
CarlosOrtizbayviewfinancial.com> wrote:
I am not able to send International
calls through our PRI's at a location outside of Philly. Local and
LD work fine. debugs at the router show the number being sent to
the telco are fine.
Debug ISDN q931
Calling Party Number i = 0x2181, '215664XXXX'
Plan:ISDN,
Type:National
Called Party
Number i = 0x91, '011448458787000'
I found a CCO TAC case where this exact
problem is described and addressed by changing the calling plan type from
national to unknown using the following command under the D channel interface.
isdn map address .* plan isdn type unknown
This did in fact change the plan type but
I was unable to complete local, LD and Intl after adding this.
Any suggestions?
Carlos
_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">cisco-voippuck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
| Re: Intl Calls with Verizon in
Philadelphia area |
United States |
2007-08-31 12:15:53 |
I had similar issues a few weeks back with an H323
gateway and tried leaving plan type as is (defaulting
to international like yours) and just striping the 011
and for whatever reason I was still getting the error.
Eventually I ended up using translation profiles to
change the plan and that worked.
voice translation-rule 1
rule 1 /^9011/ /011/ type any national plan any isdn
!
voice translation-profile pstn-out
translate called 1
!
dial-peer voice 30 pots
translation-profile outgoing pstn-out
destination-pattern 9011T
port 0/0/0:23
forward-digits all
--- CarlosOrtizbayviewfinancial.com wrote:
> I am not able to send International calls through
> our PRI's at a location
> outside of Philly. Local and LD work fine. debugs
> at the router show the
> number being sent to the telco are fine.
>
> Debug ISDN q931
>
> Calling Party Number i = 0x2181, '215664XXXX'
> Plan:ISDN, Type:National
> Called Party Number i = 0x91,
> '011448458787000'
>
> I found a CCO TAC case where this exact problem is
> described and addressed
> by changing the calling plan type from national to
> unknown using the
> following command under the D channel interface.
>
> isdn map address .* plan isdn type unknown
>
> This did in fact change the plan type but I was
> unable to complete local,
> LD and Intl after adding this.
>
> Any suggestions?
>
> Carlos
>
>
>
>
>
>
>
> > _______________________________________________
> cisco-voip mailing list
> cisco-voippuck.nether.net
> h
ttps://puck.nether.net/mailman/listinfo/cisco-voip
____________________________________________________________
________________________
Building a website is a piece of cake. Yahoo! Small Business
gives you all the tools to get online.
http://smal
lbusiness.yahoo.com/webhosting
_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip
|
|
[1-4]
|
|
|
about | contact Other archives ( Real Estate discussion Medical topics )
|