Re: Intl Calls with Verizon in Philadelphia area

On 8/31/07, CarlosOrtizbayviewfinancial.com">CarlosOrtizbayviewfinancial.com < CarlosOrtizbayviewfinancial.com">CarlosOrtizbayviewfinancial.com> wrote:

I just got off the phone with Verizon and the tech was giving me some stories that could explain your problem.  He says that once the calls get across the pond they sometimes are sent to different international carriers.  Some switches will pass it fine while others not.  That could explain your hit or miss scenario.  Anyway this is pretty aggravating.

Carlos

Ted Nugent < tednugent69yahoo.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">tednugent69yahoo.com> Sent by: cisco-voip-bouncespuck.nether.net" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">cisco-voip-bouncespuck.nether.net 08/31/2007 03:05 PM

To CarlosOrtizbayviewfinancial.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">CarlosOrtizbayviewfinancial.com cc cisco-voippuck.nether.net" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">cisco-voippuck.nether.net Subject Re: [cisco-voip] Intl Calls with Verizon in Philadelphia area

I don't have the debugs anymore and they weren't much
help anyway since I was only really seeing a LEC
disconnect but you could see that the plan and type
would switch to "Plan:ISDN, Type:International&quot; for
international calls. The LEC was Time Warner here in
Raleigh NC and the TW switch tech was saying basically
the same thing. Either drop the 011 and send it as
international or send it as national and keep the 011.
Like I said I could not get it to work dropping the
011 and sending it as international so I had to change
it to national and send the 011 which worked.
ALso another weird thing was it was only happening on
certain international calls, some would go through
fine others would get dropped with no really good ISDN
cause code other then far end rejected or something to
that affect.



--- CarlosOrtizbayviewfinancial.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">CarlosOrtizbayviewfinancial.com wrote:

> So when the calls exit what are they marked as?  
&gt; What LEC was it?
>
> Carlos
&gt;
>
>
> Ted Nugent < tednugent69yahoo.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">tednugent69yahoo.com>
> 08/31/2007 01:15 PM
>
> To
> CarlosOrtizbayviewfinancial.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">CarlosOrtizbayviewfinancial.com,
> cisco-voippuck.nether.net" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">cisco-voippuck.nether.net
&gt; cc
>
> Subject
> Re: [cisco-voip] Intl Calls with Verizon in
> Philadelphia area
>;
>
>
>
>
>
> I had similar issues a few weeks back with an H323
>; gateway and tried leaving plan type as is
> (defaulting
> to international like yours) and just striping the
> 011
> and for whatever reason I was still getting the
> error.
&gt; Eventually I ended up using translation profiles to
> change the plan and that worked.
>
> voice translation-rule 1
>  rule 1 /^9011/ /011/ type any national plan any
> isdn
>; !
> voice translation-profile pstn-out
>  translate called 1
> !
> dial-peer voice 30 pots
>;  translation-profile outgoing pstn-out
>  destination-pattern 9011T
&gt;  port 0/0/0:23
>  forward-digits all
>
>
>
>
> --- CarlosOrtizbayviewfinancial.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">CarlosOrtizbayviewfinancial.com wrote:
&gt;
> > I am not able to send International calls through
> > our PRI's at a location
> > outside of Philly.  Local and LD work fine.
> debugs
&gt; > at the router show the
> > number being sent to the telco are fine.
> >
> > Debug ISDN q931
>; >
> > Calling Party Number i = 0x2181, '215664XXXX'
> >                 Plan:ISDN, Type:National
> >         Called Party Number i = 0x91,
&gt; > '011448458787000&#39;
> >
> > I found a CCO TAC case where this exact problem is
> > described and addressed
> > by changing the calling plan type from national to
> > unknown using the
> > following command under the D channel interface.
> >
> > isdn map address .* plan isdn type unknown
> >
> > This did in fact change the plan type but I was
> > unable to complete local,
> > LD and Intl after adding this.
&gt; >
> > Any suggestions?
> >
> > Carlos
&gt; >
> >
> >
> >
> >
> >
> >
> > > _______________________________________________
> > cisco-voip mailing list
>; > cisco-voippuck.nether.net" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">cisco-voippuck.nether.net
&gt; >
>; https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>  
&gt;
____________________________________________________________________________________
> Building a website is a piece of cake. Yahoo! Small
&gt; Business gives you all
> the tools to get online.
> http://smallbusiness.yahoo.com/webhosting
>
>



     
____________________________________________________________________________________
Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more.
http://mobile.yahoo.com/go?refer=1GNXIC
_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">cisco-voippuck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
puck.nether.net">cisco-voippuck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip