Cisco IP Communicator issues

Hi List,

 

I have an CME in production and a CCM in pre-production. We were using IP Communicator registered to CME via Cisco VPN Client with sucess. But after of change the TFTP Server in Preferences/Network into IP communicator to CCM IP initially I was able to register the IP Communicator, but When I changed the TFTP Server to CME the registration is impossible, I enabled Ethereal and saw that Skinny Packets trying register to previous IP (CCM IP) I reset the IP communicator, the PC, the tunnel, turn off the CCM and the registration is not possible yet, the IP Communicator is trying to register to previous IP, and I don't know how can I modified it? Any suggestions?

 

 

Ps. I'm using the last version of IP Communicator 2.1.2.0

Rgds.

--
Omar E.P.T
-----------------
Certified Networking Professionals make better Connections!

 

Hi,

 

Jack, thanks for your help.... I reinstalled the IP Communicator whitout success, but after of some tries the skinny packets go to properly CME. However I have other problem, the status messages in IP Communicator: File Not Found SEP....D5.cnf.xml I've checked the CME flash and I haven't found the file.

 

...

 177  ; 1208   ;  SEP001956FD6521.cnf.xml 
 178  ; 1208   ;  SEP001956FD64E1.cnf.xml 
 179  ; 1208   ;  SEP001794D72D34.cnf.xml 
 180  ; 1208   ;  SEP001956FD64E2.cnf.xml 
 181  ; 1208   ;  SEP001B2A20F5EA.cnf.xml  
 182  ; 1268   ;  SEP001B2A8959FE.cnf.xml 
 183  ; 1268   ;  SEP001AA27ACFAB.cnf.xml 

...

 

I don't know how can I created that file???? it is possible?

 

Thanks again!!!

 

RGds.

 

On 11/27/07, Jack Martin < jackmtushaus.com">jackmtushaus.com> wrote:

Have you tried reinstalling IP Communicator?

 

Jack Martin, CCVP

Network Engineer

Tushaus Computer Systems

10400 Innovation Drive, Suite 100

Wauwatosa, WI 53226

Desk: 414.908.2267

Cell: 414.477.6990

Fax: 414.908.4467

tushaus.com" target="_blank">jackmtushaus.com

www.Tushaus.com

 

From: puck.nether.net" target="_blank">cisco-voip-bouncespuck.nether.net [mailto:puck.nether.net" target="_blank">cisco-voip-bouncespuck.nether.net] On Behalf Of omar parihuana
Sent: Tuesday, November 27, 2007 10:15 AM
To: cisco-voip
Subject: [cisco-voip] Cisco IP Communicator issues

 

Hi List,

 

I have an CME in production and a CCM in pre-production. We were using IP Communicator registered to CME via Cisco VPN Client with sucess. But after of change the TFTP Server in Preferences/Network into IP communicator to CCM IP initially I was able to register the IP Communicator, but When I changed the TFTP Server to CME the registration is impossible, I enabled Ethereal and saw that Skinny Packets trying register to previous IP (CCM IP) I reset the IP communicator, the PC, the tunnel, turn off the CCM and the registration is not possible yet, the IP Communicator is trying to register to previous IP, and I don't know how can I modified it? Any suggestions?

 

 

Ps. I'm using the last version of IP Communicator 2.1.2.0

Rgds.

--
Omar E.P.T
-----------------
Certified Networking Professionals make better Connections!