Changing transfer settings in Unity Connection 1.2

Hello,
  I assume I'm just blind, but I'm trying to use the bulk
edit tool to change call transfer settings.  I want to have
calls transfered by the auto attendant to go directly to the
users greeting during office hours, but ring there phone
after hours.  I know that sounds backwards, but it's what I
need to do.  I need to do this to about 900 of 1200 phones.

Thanks,

_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip

I hate to be the bearer of bad news, but... I've got bad
news. Bulk Edit 
(and Bulk Admin) were both written for UC 1.1, where there
was only a 
single transfer rule, so they don't edit the other two. This
is fixed in 
the 2.0 tools, but, word on the street is there is no
intention of 
fixing this in the 1.x versions.

Also, FYI, if you do edit the one rule that you see in the
tool, the 
changes will be applied to the alternate rule.

-------- Original Message  --------
From: "Patrick Mowry" <pmowrygetgds.com>
To: cisco-voippuck.nether.net
Subject: Changing transfer settings in Unity Connection 1.2
Date: 11/27/2007 10:52 PM

> Hello,
>   I assume I'm just blind, but I'm trying to use the
bulk edit tool to change call transfer settings.  I want to
have calls transfered by the auto attendant to go directly
to the users greeting during office hours, but ring there
phone after hours.  I know that sounds backwards, but it's
what I need to do.  I need to do this to about 900 of 1200
phones.
> 
> Thanks,
> 
> 
>
------------------------------------------------------------
------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voippuck.nether.net
> h
ttps://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip