G.722 Capability Advertisement

After applying DevPack 65 to CCM 4.1(3)sr2, some newer
devices have
the capability to "Advertise G.722 Codec" (e.g.
7985s, 7945s). In the
Device configuration, options are Disabled, Enabled or Use
System
Default.

However, in CCM 4.1(3) I cannot find the "Advertise
G.722 Codec"
System Default as it's not on the Enterprise Parameters'
page. I
thought this may be an SR issue, so have 4.1(3)SR6a
installed on a
test system and the G.722 System Default isn't there either.
I've
checked in the CallManager Service Parameters too.

Cheers,

Matt

-- 
Matthew Melbourne
_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip

Yep, not there that I can see in 4.1.  This is very likely a
bug, though 
none currently exists that I can find.  I recommend a new
TAC case for 
proper investigation and defect if it becomes necessary.

/Wes

Matthew Melbourne wrote:
> After applying DevPack 65 to CCM 4.1(3)sr2, some newer
devices have
> the capability to "Advertise G.722 Codec"
(e.g. 7985s, 7945s). In the
> Device configuration, options are Disabled, Enabled or
Use System
> Default.
>
> However, in CCM 4.1(3) I cannot find the
"Advertise G.722 Codec"
> System Default as it's not on the Enterprise
Parameters' page. I
> thought this may be an SR issue, so have 4.1(3)SR6a
installed on a
> test system and the G.722 System Default isn't there
either. I've
> checked in the CallManager Service Parameters too.
>
> Cheers,
>
> Matt
>
>   
_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip