BRI interfaces - Grouping?

Hi all,

 

I’m wandering if anyone has any idea’;s on this one?

 

If I was to have 3x2 port BRI interfaces, would there be anyway I can group these? So that when I configure my dial peer I only specify the “Group” rather than having to create individual dial peers with different preferences for each of the BRI cards?

 

For example:

 

BRI Configuration – points to 1 specific BRI interface

dial-peer voice 1 pots

 destination-pattern 905.

 port 0/3/0

 forward-digits all

What I’m trying to achieve is the same as what is done with a PRI

dial-peer voice 2 pots

 destination-pattern 905.

 port 0/3/0:15

 forward-digits all

 

Anyone got any idea’;s? or has anyone done this before?

 

Cheers,

Johnny

This communication, including any attachments, is confidential. If you are not the intended recipient, you should not read it - please contact me immediately, destroy it, and do not copy or use any part of this communication or disclose anything about it. Thank you. Please note that this communication does not designate an information system for the purposes of the Electronic Transactions Act 2002.

Use “trunkgroupR21; command, and prioritize the physical interfaces within the group.  Then all you need to do is reference the group within the “Dial-PeersR21;

 

Mike

 

 

Hi all,

 

I’m wandering if anyone has any idea’;s on this one?

 

If I was to have 3x2 port BRI interfaces, would there be anyway I can group these? So that when I configure my dial peer I only specify the ̶0;GroupR21; rather than having to create individual dial peers with different preferences for each of the BRI cards?

 

For example:

 

BRI Configuration – points to 1 specific BRI interface

dial-peer voice 1 pots

 destination-pattern 905.

 port 0/3/0

 forward-digits all

What I’m trying to achieve is the same as what is done with a PRI

dial-peer voice 2 pots

 destination-pattern 905.

 port 0/3/0:15

 forward-digits all

 

Anyone got any idea’;s? or has anyone done this before?

 

Cheers,

Johnny

This communication, including any attachments, is confidential. If you are not the intended recipient, you should not read it - please contact me immediately, destroy it, and do not copy or use any part of this communication or disclose anything about it. Thank you. Please note that this communication does not designate an information system for the purposes of the Electronic Transactions Act 2002.