TAPS Cisco Call Manager 6.1

Did you create a trigger, is the CTI RP (as well as the CTI
Ports)
registered with CCM?

Does the phone have a CSS to call the partition that that
trigger is in?

Are you using G729?


Jonathan

On Mon, Mar 17, 2008 at 11:34 AM, Akaal singh
<akaalvoipgooglemail.com> wrote:
> Hi,
>
> I am having problems with TAPS on CCM 6.1, every time
we try to call the
> TAPS number we get a busy line, everything looks like
its configured right
> could some one please help me out with this.
> Thank you
>
>
> _______________________________________________
>  cisco-voip mailing list
>  cisco-voippuck.nether.net
>  h
ttps://puck.nether.net/mailman/listinfo/cisco-voip
>
>
_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip

Check the engine on IPCC... see if the telephony subsystem
is in service...

J

On Mon, Mar 17, 2008 at 5:22 PM, Akaal singh
<akaalvoipgooglemail.com> wrote:
> I have created the trigger, TAPS rp, all phones are
part of TAPS CSS.
>  When I connect a Phone the phone dials the TAPS number
but I get a
>  busy signal. Also everything is registed with call
manager. I have
>  restarted devices as well.
>
>  A bit lost.....
>
>
>
>
>  On 17/03/2008, Jonathan Charles <jonvoipgmail.com> wrote:
>  > Did you create a trigger, is the CTI RP (as well
as the CTI Ports)
>  > registered with CCM?
>  >
>  > Does the phone have a CSS to call the partition
that that trigger is in?
>  >
>  > Are you using G729?
>  >
>  >
>  > Jonathan
>  >
>  > On Mon, Mar 17, 2008 at 11:34 AM, Akaal singh
<akaalvoipgooglemail.com>
>  > wrote:
>  > > Hi,
>  > >
>  > > I am having problems with TAPS on CCM 6.1,
every time we try to call the
>  > > TAPS number we get a busy line, everything
looks like its configured right
>  > > could some one please help me out with
this.
>  > > Thank you
>  > >
>  > >
>  > >
_______________________________________________
>  > >  cisco-voip mailing list
>  > >  cisco-voippuck.nether.net
>  > >  h
ttps://puck.nether.net/mailman/listinfo/cisco-voip
>  > >
>  > >
>  >
>
_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip

I have created the trigger, TAPS rp, all phones are part of
TAPS CSS.
When I connect a Phone the phone dials the TAPS number but I
get a
busy signal. Also everything is registed with call manager.
I have
restarted devices as well.

A bit lost.....


On 17/03/2008, Jonathan Charles <jonvoipgmail.com> wrote:
> Did you create a trigger, is the CTI RP (as well as the
CTI Ports)
> registered with CCM?
>
> Does the phone have a CSS to call the partition that
that trigger is in?
>
> Are you using G729?
>
>
> Jonathan
>
> On Mon, Mar 17, 2008 at 11:34 AM, Akaal singh
<akaalvoipgooglemail.com>
> wrote:
> > Hi,
> >
> > I am having problems with TAPS on CCM 6.1, every
time we try to call the
> > TAPS number we get a busy line, everything looks
like its configured right
> > could some one please help me out with this.
> > Thank you
> >
> >
> > _______________________________________________
> >  cisco-voip mailing list
> >  cisco-voippuck.nether.net
> >  h
ttps://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip

Are the CTI ports in a partition accessible from the CSS
assigned to the
phone you are dialing from?

-----Original Message-----
From: cisco-voip-bouncespuck.nether.net
[mailto:cisco-voip-bouncespuck.nether.net] On Behalf
Of Akaal singh
Sent: Monday, March 17, 2008 5:22 PM
To: Jonathan Charles; cisco-voippuck.nether.net
Subject: Re: [cisco-voip] TAPS Cisco Call Manager 6.1

I have created the trigger, TAPS rp, all phones are part of
TAPS CSS.
When I connect a Phone the phone dials the TAPS number but I
get a
busy signal. Also everything is registed with call manager.
I have
restarted devices as well.

A bit lost.....


On 17/03/2008, Jonathan Charles <jonvoipgmail.com> wrote:
> Did you create a trigger, is the CTI RP (as well as the
CTI Ports)
> registered with CCM?
>
> Does the phone have a CSS to call the partition that
that trigger is
in?
>
> Are you using G729?
>
>
> Jonathan
>
> On Mon, Mar 17, 2008 at 11:34 AM, Akaal singh
<akaalvoipgooglemail.com>
> wrote:
> > Hi,
> >
> > I am having problems with TAPS on CCM 6.1, every
time we try to call
the
> > TAPS number we get a busy line, everything looks
like its configured
right
> > could some one please help me out with this.
> > Thank you
> >
> >
> > _______________________________________________
> >  cisco-voip mailing list
> >  cisco-voippuck.nether.net
> >  h
ttps://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voippuck.nether.net
h
ttps://puck.nether.net/mailman/listinfo/cisco-voip