911 with one way audio (Jason Aarons (US))

On 5/27/06, Chris Ellington <nsi1.com">chris.ellingtonnsi1.com > wrote:

While I've used that as a solution to fixing 911 one-way audio issues, does
anyone know WHY certain destinations, such as 911, 411 etc don't provide the
answer supervision which requires us to use the cut through command below?
The issue you can run into when using that is the CDRs for any calls that
aren't providing proper answer supervision don't work correctly
(usually).

Ideas?

chris
>
&gt; Add;
>
>
>
&gt; voice rtp send-recv
>
>
&gt;
> ________________________________
>
> From: puck.nether.net">cisco-voip-bouncespuck.nether.net
> [mailto:puck.nether.net">cisco-voip-bouncespuck.nether.net] On Behalf Of Wydra, Jason
>; Sent: Friday, May 26, 2006 4:54 PM
> To: puck.nether.net">cisco-voippuck.nether.net
> Subject: [cisco-voip] 911 with one way audio
>
>
>
> Off the top of your heads, can you give me any ideas why calls to 911
> would present one way audio? I can hear the 911 center but they cannot
>; hear me. There are 20 remote sites in different states with identical
> setups. Two out of the twenty are having this problem. The others are
> fine. One is located in Sacramento and the other is in Edina, MN. All
> scenarios utilize PRI and H323 gateways. Qwest is the carrier for both
> trouble sites. There are other sites that use Qwest that work fine.
>;
>
>
> Thanks,
&gt;
>
>;
> Jason Wydra
>
>
>
>

--
Christopher S. Ellington
CCIE #6814
Network Solutions, Inc.
(317) 566 8897
nsi1.com"> Chris.Ellingtonnsi1.com


_______________________________________________
cisco-voip mailing list
puck.nether.net">cisco-voippuck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip