ok some configs
Router IAD
.
network-clock base-rate 56k
ip subnet-zero
.
.
controller T1 0
framing esf
linecode b8zs
mode cas
tdm-group 0 timeslots 1-24 type e&m
.
.
Interface serial0
no ip address
encapsulation clear-channel
clockrate line 56000
.
.
----------
Router MIA
.
network-clock base-rate 56k
ip subnet-zero
.
.
controller T1 0
framing esf
linecode b8zs
mode cas
tdm-group 0 timeslots 1-24 type e&m
.
.
Interface serial0
no ip address
encapsulation clear-channel
clockrate line 56000
---
I assume since I can't assign an IP address to a t1
controller,
I can cross-connect (via the cross-connect command) the t1
to a serial interface and assign the Ip address to the
serial interface.
that seems logical..
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7
&i=116577&t=116566
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.
groupstudy.com/list/cisco.html
|