Just trying...
I never try the context, but I think you can try this out, I
don't know if
ASA can do PBR.
http://www.cisco.com/en/US/products/
hw/vpndevc/ps2030/products_configuration
_example09186a00808d2b63.shtml
You can create 2 VLANs for the inside if you don't have
enough
interfaces...why the requirements of the 2 subnets to go to
different ISP?
-----Original Message-----
From: nobody groupstudy.com [mailto:nobodygroupstudy.com] On Behalf
Of
Narasimha Lavangu
Sent: Thursday, July 03, 2008 10:57 AM
To: ciscogroupstudy.com
Subject: ASA 5520 [7:131793]
Hi,
Need your help for the below scenerio. Thanks in advance.
I have two internal networks i.e 10.x.x.x and 192.x.x.x
networks. Presently
192.x.x.x network is connected to ASA 5520 and connected
with 2 mb internet
link. 10.x.x.x network using monowall firewall and using
ethernet link from
other service provider which is connected directly my switch
(Monowall other
interface is service provider range ip). Now i want to
migrate 10.x.x.x
network to ASA and use the ethernet link to ASA as outside.
Now i want to
route 192.x.x.x to one service provider and 10.x.x.x network
to other
service provider. Already ASA has default route to other
service provider
which is connected cisco 2811 router. i want 192 and 10
should communicate.
Ethernet link i will connect to fastethernet of ASA and will
make it as
outside interface. 10.x.x.1 as internal interface and
default gateway for
LAN users. Please guide me how to proceed. Is there any
document/guide on
ASA configuration using ASDM.
regards
Narasimha
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7
&i=131794&t=131793
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.
groupstudy.com/list/cisco.html
|