Re: CCIE LAB seat @ RTP

Even if they are, given the configs that I on the router,
should it not
properly work?
On Mon, Aug 11, 2008 at 4:30 PM, Robert Taylor  wrote:

>  Your services provider might be natting 192.168.40.112
to a public ip.
> ask them about it.
>
>
>
> *From RS
[mailto:jscriptwizgmail.com]
> *Sent Monday,
August 11, 2008 3:07 PM
>
> *To Robert
Taylor
> *Subject Re: CCIE
LAB seat  RTP [7:132258]
>
>
>
> However, when I plug my PC into the wall port and chg
its settings to
> 192.168.40.112 w/ GTWY 192.168.40.10 it works, and I
can ping from the
> router w/o using NAT. ??
>
> On Mon, Aug 11, 2008 at 3:59 PM, Robert Taylor 
Robert.Taylordigicelgroup.com> wrote:
>
> Because the public address 4.2.2.2 cannot reply to your
private address
> 192.168.10.x.
>
>
>
> *From RS
[mailto:jscriptwizgmail.com]
> *Sent Monday,
August 11, 2008 2:57 PM
> *To Robert
Taylor
>
>
> *Subject Re: CCIE
LAB seat  RTP [7:132258]
>
>
>
> I understand the basis of NAT for the most part, but in
this instance why
> would I need to set it up? Why would I not be able to
ping from one network
> to another if the GTWY is connected to both and has a
default route?
>
> On Mon, Aug 11, 2008 at 3:54 PM, Robert Taylor 
Robert.Taylordigicelgroup.com> wrote:
>
> If 192.168.10.3 255.255.255.0 is your private/local net
you'll have to
> set up nat.
>
>
> -----Original Message-----
> From: nobodygroupstudy.com [mailto:nobodygroupstudy.com] On Behalf Of
> RS
>
> Sent: Monday, August 11, 2008 2:52 PM
> To: ciscogroupstudy.com
>
> Subject: Re: CCIE LAB seat  RTP [7:132258]
>
> I do not have NAT implemented. Here are the configs for
the sh run
>
>
> interface FastEthernet0/0
>  ip address 192.168.40.112 255.255.255.0
>  duplex auto
>  speed auto
> end
>
>
> interface FastEthernet0/1
>  ip address 192.168.10.3 255.255.255.0
>  duplex auto
>  speed auto
> end
>
>
> Thanks,
> Richard
>
>
>
> On Mon, Aug 11, 2008 at 3:41 PM, Robert Taylor  wrote:
>
> >  Ok  sh ip nat transaction and sh run int f0/0 and
f0/1
> >
> >
> >
> > *From RS
[mailto:jscriptwizgmail.com]
> > *Sent Monday,
August 11, 2008 2:38 PM
> > *To Robert
Taylor
> > *Cc Cisco
certification
> > *Subject Re: CCIE
LAB seat  RTP [7:132258]
> >
> >
> >
> > I can reach router_a from the host, but when I
ping 4.2.2.2 from the
> host
> > and do sh ip cache flow I do not see any packets.
> >
> >
> > Router_A#sh ip cache flow
> > IP packet size distribution (0 total packets):
> >    1-32   64   96  128  160  192  224  256  288 
320  352  384  416
> 448
> > 480
> >    .000 .000 .000 .000 .000 .000 .000 .000 .000
.000 .000 .000 .000
> .000
> > .000
> >
> >     512  544  576 1024 1536 2048 2560 3072 3584
4096 4608
> >    .000 .000 .000 .000 .000 .000 .000 .000 .000
.000 .000
> >
> > IP Flow Switching Cache, 0 bytes
> >   0 active, 0 inactive, 0 added
> >   0 ager polls, 0 flow alloc failures
> >   Active flows timeout in 30 minutes
> >   Inactive flows timeout in 15 seconds
> >   last clearing of statistics never
> > Protocol         Total    Flows   Packets Bytes 
Packets Active(Sec)
> > Idle(Sec)
> > --------         Flows     /Sec     /Flow  /Pkt   
 /Sec     /Flow
> > /Flow
> >
> > SrcIf         SrcIPaddress    DstIf        
DstIPaddress    Pr SrcP
> DstP
> > Pkts
> > Router_A#
> >
> > Notice of Confidentiality:
> >
> > The information contained in this communication is
intended solely for
> the
> > use of the individual or entity to whom it is
addressed and others
> > authorized to receive it. It may contain
confidential or legally
> privileged
> > information. If you are not the intended recipient
you are hereby
> notified
> > that any disclosure, copying, distribution or
taking any action in
> reliance
> > on the contents of this information is strictly
prohibited and may be
> > unlawful. If you have received this communication
in error, please
> notify
> us
> > immediately by responding to this email and then
delete it from your
> system.
> Notice of Confidentiality:
>
> The information contained in this communication is
intended solely for the
> use of the individual or entity to whom it is addressed
and others
> authorized to receive it. It may contain confidential
or legally privileged
> information. If you are not the intended recipient you
are hereby notified
> that any disclosure, copying, distribution or taking
any action in reliance
> on the contents of this information is strictly
prohibited and may be
> unlawful. If you have received this communication in
error, please notify
us
> immediately by responding to this email and then delete
it from your
system.
>
>
>
> Notice of Confidentiality:
>
> The information contained in this communication is
intended solely for the
> use of the individual or entity to whom it is addressed
and others
> authorized to receive it. It may contain confidential
or legally privileged
> information. If you are not the intended recipient you
are hereby notified
> that any disclosure, copying, distribution or taking
any action in reliance
> on the contents of this information is strictly
prohibited and may be
> unlawful. If you have received this communication in
error, please notify
us
> immediately by responding to this email and then delete
it from your system.




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7
&i=132264&t=132258
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.
groupstudy.com/list/cisco.html