MCF5233 Pin C7 and D7 function

Hi there folks.
In the hardware spec. for HCF5233 (MCF5235EC.pdf Rev. 1.7)
it is indicated
from the MAPBGA pinout in figure 4 on page 16 that two pins
are named C7 and
D7 with a possible useage as UART 2 or an I2C.

However, in table 2 on page 6, pin C7 and D7 is not assigned
any function.

Does any one know if C7 and D7 really is unassigned or if
the UART function
is availble?

Cheers

Olof


------------------------------------------------------------
--------
To Subscribe send a message to:      ColdFire-OnLists.Wildrice.com
To Unsubscribe send a message to:    ColdFire-OffLists.Wildrice.com
For further information, visit:      <http://www.Wild
Rice.com/ColdFire/>