Re: Find IP number ?

There is no 'ipconfig' in Win98. Go to the Run box and type 'winipcfg'.

You shouldn't need the '/all', just select the proper network interface
and it will show you IP, subnet mask and gateway.

Tom

Ken (desco) Ramsey wrote:
> With the computer connected to the internet and;
>; At the command prompt or in Win98 the DOS Prompt type ipconfig /all
>; The ip address will be returned.
> If the unit uses a dynamic ip assignment, the information is valid only
>; until the connected session ends.
>
> -----Original Message-----
> From: Computer_Help_and_Discussion%40yahoogroups.com">Computer_Help_and_Discussionyahoogroups.com
> [mailto: Computer_Help_and_Discussion%40yahoogroups.com">Computer_Help_and_Discussionyahoogroups.com]On Behalf Of
> mrwatcher2000
> Sent: Saturday, June 16, 2007 3:43 PM
> To: Computer_Help_and_Discussion%40yahoogroups.com">Computer_Help_and_Discussionyahoogroups.com
> Subject: [CHAD] Find IP number ?
>
>
> I want to connect to my sisters computer in another state,
> I need her IP number for her CPU , how do I get that ?
>
> I know they don't know it , that's why I'm trying to
> connect to their CPU and help install software ...
>
> I don't even know my IP number, or how to find it ,
> I have Win XP , my sister has Win 98 .
>
> I am trying to use ULTRA VNC to try to connect to her
> CPU , which I just downloaded , haven't got it all figured out
> yet , got it installed and opened the Viewer, the Viewer has
> a whole bunch of windows in it , I really just need one ..??
>;
> Thanks for all the help
>;
> Greg

Messages in this topic (0) Reply (via web post) | Start a new topic

.

My Win98 2ed has both and both files have the file size time and date stamp.
Winipcfg should work too.

-----Original Message-----
From: Computer_Help_and_Discussion%40yahoogroups.com">Computer_Help_and_Discussionyahoogroups.com
[mailto: Computer_Help_and_Discussion%40yahoogroups.com">Computer_Help_and_Discussionyahoogroups.com]On Behalf Of T. Hunt
Sent: Saturday, June 16, 2007 8:43 PM
To: Computer_Help_and_Discussion%40yahoogroups.com">Computer_Help_and_Discussionyahoogroups.com
Subject: Re: [CHAD] Find IP number ?

There is no 'ipconfig' in Win98. Go to the Run box and type 'winipcfg'.

You shouldn't need the '/all', just select the proper network interface
and it will show you IP, subnet mask and gateway.

Tom

Ken (desco) Ramsey wrote:
> With the computer connected to the internet and;
>; At the command prompt or in Win98 the DOS Prompt type ipconfig /all
>; The ip address will be returned.
> If the unit uses a dynamic ip assignment, the information is valid only
>; until the connected session ends.
>
> -----Original Message-----
> From: Computer_Help_and_Discussion%40yahoogroups.com">Computer_Help_and_Discussionyahoogroups.com
> [mailto: Computer_Help_and_Discussion%40yahoogroups.com">Computer_Help_and_Discussionyahoogroups.com]On Behalf Of
> mrwatcher2000
> Sent: Saturday, June 16, 2007 3:43 PM
> To: Computer_Help_and_Discussion%40yahoogroups.com">Computer_Help_and_Discussionyahoogroups.com
> Subject: [CHAD] Find IP number ?
>
>
>; I want to connect to my sisters computer in another state,
> I need her IP number for her CPU , how do I get that ?
>
> I know they don't know it , that's why I'm trying to
> connect to their CPU and help install software ...
>
> I don't even know my IP number, or how to find it ,
> I have Win XP , my sister has Win 98 .
>
> I am trying to use ULTRA VNC to try to connect to her
> CPU , which I just downloaded , haven't got it all figured out
> yet , got it installed and opened the Viewer, the Viewer has
> a whole bunch of windows in it , I really just need one ..??
>;
> Thanks for all the help
>;

Messages in this topic (0) Reply (via web post) | Start a new topic

.