Building rpm for courier-authlib

Hello list,

I got problems during building an rpm for courier-authlib.

2 Problems:
SMP-MFLAGS
make: *** No rule to make target `%'.  Stop.
error: Bad exit status from /var/tmp/rpm-tmp.26165 (%build)

I found the smp_mflags in the file courier-authlib.spec
>%build
>% %

Changing to 
>%
brought the second error:
RPM build errors:
    File not found by glob:
/var/tmp/courier-authlib-0.59.1-1.fc6-root-/etc/rc.d/init.d/
*

During the unnormal installation run
  ./configure --with-redhat
  make
I got no errors.

My system is an intel duo core xeon computer with redhat
fedora core 6.0
x64

Any ideas?
Thanks in advance

Stefan Noll

------------------------------------------------------------
-------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the
chance to share your
opinions on IT & business topics through brief
surveys-and earn cash
http://www.techsay.com/default.
php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Courier-imap mailing list
Courier-imaplists.sourceforge.net
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-im
ap

Noll, Stefan | METRIX Internet Design GmbH wrote, on 05. apr
2007 16:07:

> I got problems during building an rpm for
courier-authlib.
> 
> 2 Problems:
> SMP-MFLAGS
> make: *** No rule to make target `%'. 
Stop.
> error: Bad exit status from /var/tmp/rpm-tmp.26165
(%build)
> 
> I found the smp_mflags in the file
courier-authlib.spec
>> %build
>> % %
> 
> Changing to 
>> %
> brought the second error:
> RPM build errors:
>     File not found by glob:
>
/var/tmp/courier-authlib-0.59.1-1.fc6-root-/etc/rc.d/init.d/
*
> 
> During the unnormal installation run
>   ./configure --with-redhat
>   make
> I got no errors.
> 
> My system is an intel duo core xeon computer with
redhat fedora core 6.0
> x64

I have just yesterday built Sam's
Courier-everything-but-the-MTA (my 
chosen's forever been Postfix, this time 2.4) on 32-bit AMD
FC6.

Nothing barfed so's I'd notice from out-of-the-ordinary with
any of the 
umpteen (about 20) non-Sam, non-anywhere-repo stuff rpm
builds 
(including Buchan Milnes' OpenLDAP latest - 2.3.34 - and
Simon J. Mudd's 
2.4 Postfix of which I had to massage the spec files
lightly, as well as 
k3b 1.0 CD/DVD burning stuff).

Nothing barfed with any of the 3 Courier rpms I built (of
course with 
authlib).

No problems with any Courier stuff or anything that wasn't
my fault and 
that I could solve almost immediately (like FC6 bugs, Google
for these, 
up to a morning at a time, there's plenty of FC6 shit to
Google for).

So you're running --with redhat. *DON't*. I used to aeons
ago. I used to 
run the builds as root then, but I gave that up long ago. It
causes 
utter shit to all kinds of sysadmin tasks and builds.

So you're running "x64". On what hardware (not
that that makes much 
difference)? "x32" works on ours.

Best,

--Tonni

-- 
Tony Earnshaw
Email: tonni at hetnet dot nl

------------------------------------------------------------
-------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the
chance to share your
opinions on IT & business topics through brief
surveys-and earn cash
http://www.techsay.com/default.
php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Courier-imap mailing list
Courier-imaplists.sourceforge.net
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-im
ap

Tony Earnshaw wrote, on 05. apr 2007 22:03:
>
[...]


> I have just yesterday built Sam's
Courier-everything-but-the-MTA (my 
> chosen's forever been Postfix, this time 2.4) on 32-bit
AMD FC6.

Hmmm ... I forgot to say that this was a definite and
conscious upgrade 
from RHAS4 to FC6. Makes no difference if it were from RHAS5
or CentOS 
4,9 whatever, this was for my test site a major upgrade.
With which I'm 
ridiculously happy and content. Not that there wasn't a lot
of 
extraneous work to do.

--Tonni
-- 
Tony Earnshaw
Email: tonni at hetnet dot nl

------------------------------------------------------------
-------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the
chance to share your
opinions on IT & business topics through brief
surveys-and earn cash
http://www.techsay.com/default.
php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Courier-imap mailing list
Courier-imaplists.sourceforge.net
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-im
ap

Noll, Stefan | METRIX Internet Design GmbH writes:

> Hello list,
> 
> I got problems during building an rpm for
courier-authlib.
> 
> 2 Problems:
> SMP-MFLAGS
> make: *** No rule to make target `%'. 
Stop.
> error: Bad exit status from /var/tmp/rpm-tmp.26165
(%build)

Install the redhat-rpm-config package, then try again.



------------------------------------------------------------
-------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the
chance to share your
opinions on IT & business topics through brief
surveys-and earn cash
http://www.techsay.com/default.
php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Courier-imap mailing list
Courier-imaplists.sourceforge.net
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-im
ap