Hi! This is the ezmlm program. I'm managing the
cygwin-announce cygwin.com mailing list.
Messages to you from the cygwin-announce mailing list seem
to
have been bouncing. I've attached a copy of the first
bounce
message I received.
If this message bounces too, I will send you a probe. If the
probe bounces,
I will remove your address from the cygwin-announce mailing
list,
without further notice.
I've kept a list of which messages from the cygwin-announce
mailing list have
bounced from your address.
Copies of these messages may be in the archive.
To retrieve a set of messages 123-145 (a maximum of 100 per
request),
send an empty message to:
<cygwin-announce-get.123_145cygwin.com>
To receive a subject and author list for the last 100 or so
messages,
send an empty message to:
<cygwin-announce-indexcygwin.com>
Here are the message numbers:
2656
2657
2660
2659
2661
2658
2662
2663
2664
2666
2665
2667
2668
2669
2670
2671
2672
2673
--- Enclosed is a copy of the bounce message I received.
Return-Path: <>
Received: (qmail 29123 invoked by uid 22791); 3 Apr 2008
13:05:50 -0000
X-Spam-Status: No, hits=-1.3 required=5.0
tests=AWL,BAYES_00
X-Spam-Check-By: sourceware.org
Received: from starfire.sharedlog.com (HELO
starfire.sharedlog.com) (69.57.137.148)
by sourceware.org (qpsmtpd/0.31) with ESMTP; Thu, 03 Apr
2008 13:05:15 +0000
Received: by starfire.sharedlog.com (Postfix)
id B99C97F5DEB; Thu, 3 Apr 2008 08:05:12 -0500 (CDT)
Date: Thu, 3 Apr 2008 08:05:12 -0500 (CDT)
From: MAILER-DAEMONsharedlog.com (Mail Delivery System)
Subject: Undelivered Mail Returned to Sender
To: cygwin-announce-return-2656-nessto=sharedlog.comcygwin.com
Auto-Submitted: auto-replied
MIME-Version: 1.0
Content-Type: multipart/report;
report-type=delivery-status;
boundary="A205C7F5D9C.1207227912/starfire.sharedlog.co
m"
Message-Id: <20080403130512.B99C97F5DEBstarfire.sharedlog.com>
X-Virus-Checked: Checked by ClamAV on sourceware.org
This is a MIME-encapsulated message.
--A205C7F5D9C.1207227912/starfire.sharedlog.com
Content-Description: Notification
Content-Type: text/plain; charset=us-ascii
This is the mail system at host starfire.sharedlog.com.
I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached
below.
For further assistance, please send mail to
<postmaster>
If you do so, please include this problem report. You can
delete your own text from the attached returned message.
The mail system
<messagesharedlog.com> (expanded from <nesstosharedlog.com>): delivery
temporarily suspended: lost connection with
127.0.0.1[127.0.0.1] while
sending RCPT TO
--A205C7F5D9C.1207227912/starfire.sharedlog.com
Content-Description: Delivery report
Content-Type: message/delivery-status
Reporting-MTA: dns; starfire.sharedlog.com
X-Postfix-Queue-ID: A205C7F5D9C
X-Postfix-Sender: rfc822;
cygwin-announce-return-2656-nessto=sharedlog.comcygwin.com
Arrival-Date: Mon, 31 Mar 2008 07:27:15 -0500 (CDT)
Final-Recipient: rfc822; messagesharedlog.com
Original-Recipient: rfc822;nesstosharedlog.com
Action: failed
Status: 4.4.2
Diagnostic-Code: X-Postfix; delivery temporarily suspended:
lost connection
with 127.0.0.1[127.0.0.1] while sending RCPT TO
--A205C7F5D9C.1207227912/starfire.sharedlog.com
Content-Description: Undelivered Message
Content-Type: message/rfc822
Received: from sourceware.org (sourceware.org
[209.132.176.174])
by starfire.sharedlog.com (Postfix) with SMTP id
A205C7F5D9C
for <nesstosharedlog.com>; Mon, 31 Mar 2008
07:27:15 -0500 (CDT)
Received: (qmail 4313 invoked by alias); 31 Mar 2008
12:27:01 -0000
Delivered-To: moderator for cygwin-announcecygwin.com
Received: (qmail 19717 invoked by uid 22791); 31 Mar 2008
12:16:58 -0000
X-Spam-Check-By: sourceware.org
Date: Mon, 31 Mar 2008 14:15:04 +0200
From: Corinna Vinschen <corinna-cygwincygwin.com>
To: cygwin-announcecygwin.com
Subject: Updated: OpenSSH-4.9p1-1
Message-ID: <20080331121504.GA29080calimero.vinschen.de>
Mail-Followup-To: cygwin-announcecygwin.com
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.5.16 (2007-06-09)
Mailing-List: contact cygwin-announce-helpcygwin.com; run by ezmlm
Precedence: bulk
List-Id: <cygwin-announce.cygwin.com>
List-Unsubscribe:
<mailto:cygwin-announce-unsubscribe-nessto=sharedlog.com<
img src="/img/at.gif" align="middle" border="0"
alt="">cygwin.com>
List-Subscribe: <mailto:cygwin-announce-subscribecygwin.com>
List-Archive: <http://
sourceware.org/ml/cygwin-announce/>
List-Post: <mailto:cygwin-announcecygwin.com>
List-Help: <mailto:cygwin-announce-helpcygwin.com>, <http://sourceware.
org/ml/#faqs>
Sender: cygwin-announce-ownercygwin.com
Mail-Followup-To: cygwincygwin.com
Reply-To: The Cygwin Mailing List <cygwincygwin.com>
Delivered-To: mailing list cygwin-announcecygwin.com
I've just updated the version of OpenSSH to 4.9p1-1.
This is a new major upstream release. The Cygwin release is
created
from the vanilla sources.
The official release message of 4.9p1:
============================================================
========
OpenSSH 4.9 has just been released. It will be available
from the
mirrors listed at http://www.openssh.com/
shortly.
OpenSSH is a 100% complete SSH protocol version 1.3, 1.5 and
2.0
implementation and includes sftp client and server support.
Once again, we would like to thank the OpenSSH community for
their
continued support of the project, especially those who
contributed
code or patches, reported bugs, tested snapshots and
purchased
T-shirts or posters.
T-shirt, poster and CD sales directly support the project.
Pictures
and more information can be found at:
http://www.openbs
d.org/tshirts.html and
http://www.openbsd
.org/orders.html
For international orders use http://https.o
penbsd.org/cgi-bin/order
and for European orders, use http://http
s.openbsd.org/cgi-bin/order.eu
Note that OpenSSH 4.8 was an OpenBSD-only release shipped
with the
OpenBSD 4.3 CD.
Changes since OpenSSH 4.7:
============================
Security:
* Disable execution of ~/.ssh/rc for sessions where a
command has been
forced by the sshd_config ForceCommand directive. Users
who had
write access to this file could use it to execute
abritrary commands.
This behaviour was documented, but was an unsafe default
and an extra
hassle for administrators.
New features:
* Added chroot(2) support for sshd(8), controlled by a new
option
"ChrootDirectory". Please refer to
sshd_config(5) for details, and
please use this feature carefully. (bz#177 bz#1352)
* Linked sftp-server(8) into sshd(8). The internal sftp
server is
used when the command "internal-sftp" is
specified in a Subsystem
or ForceCommand declaration. When used with
ChrootDirectory, the
internal sftp server requires no special configuration
of files
inside the chroot environment. Please refer to
sshd_config(5) for
more information.
* Added a "no-user-rc" option for
authorized_keys to disable execution
of ~/.ssh/rc
* Added a protocol extension method "posix-renameopenssh.com" for
sftp-server(8) to perform POSIX atomic rename()
operations.
(bz#1400)
* Removed the fixed limit of 100 file handles in
sftp-server(8). The
server will now dynamically allocate handles up to the
number of
available file descriptors. (bz#1397)
* ssh(8) will now skip generation of SSH protocol 1
ephemeral server
keys when in inetd mode and protocol 2 connections are
negotiated.
This speeds up protocol 2 connections to inetd-mode
servers that
also allow Protocol 1 (bz#440)
* Accept the PermitRootLogin directive in a sshd_config(5)
Match
block. Allows for, e.g. permitting root only from the
local
network.
* Reworked sftp(1) argument splitting and escaping to be
more
internally consistent (i.e. between sftp commands) and
more
consistent with sh(1). Please note that this will change
the
interpretation of some quoted strings, especially those
with
embedded backslash escape sequences. (bz#778)
* Support "Banner=none" in sshd_config(5) to
disable sending of a
pre-login banner (e.g. in a Match block).
* ssh(1) ProxyCommands are now executed with $SHELL rather
than
/bin/sh.
* ssh(1)'s ConnectTimeout option is now applied to both
the TCP
connection and the SSH banner exchange (previously it
just covered
the TCP connection). This allows callers of ssh(1) to
better detect
and deal with stuck servers that accept a TCP connection
but don't
progress the protocol, and also makes ConnectTimeout
useful for
connections via a ProxyCommand.
* Many new regression tests, including interop tests
against PuTTY's
plink.
* Support BSM auditing on Mac OS X
The following bugs have been fixed in this release:
- scp(1) incorrectly reported "stalled" on slow
copies. (bz#799)
- scp(1) date underflow for timestamps before epoch.
(bz#828)
- scp(1) and sftp(1) progressmeter type fixes. (bz#842)
- SSH2_MSG_UNIMPLEMENTED packets did not correctly reset
the client
keepalive logic, causing disconnections on servers that
did not
explicitly implement "keepaliveopenssh.com". (bz#1307)
- ssh(1) used the obsolete SIG DNS RRtype for host keys
in DNS,
instead of the current standard RRSIG. (bz#1317)
- Extract magic buffer size constants in scp(1) to
#defines.
(bz#1333)
- Correctly drain ACKs when a sftp(1) upload write fails
midway,
avoids a fatal() exit from what should be a recoverable
condition.
(bz#1354)
- Avoid pointer arithmetic and strict aliasing warnings.
(bz#1355)
- Fixed packet size advertisements. Previously TCP and
agent
forwarding incorrectly advertised the channel window
size as the
packet size, causing fatal errors under some
conditions. (bz#1360)
- Document KbdInteractiveAuthentication in
sshd_config(5). (bz#1367)
- Fixed sftp(1) file handle leak on download when the
local file
could not be opened. (bz#1375)
- Fixed ssh-keygen(1) selective host key hashing (i.e.
"ssh-keygen -HF hostname") to not include any
IP address in the
data to be hashed. (bz#1376)
- Fix clobbering of struct passwd from multiple getpwid
calls,
resulting in fatal errors inside tilde_expand_filename.
(bz#1377)
- Fix parsing of port-forwarding specifications to
correctly
detect errors in either specified port number.
(bz#1378)
- Fix memory leak in ssh(1) ~ escape commandline
handling. (bz#1379)
- Make ssh(1) skip listening on the IPv6 wildcard address
when a
binding address of 0.0.0.0 is used against an old SSH
server that
does not support the RFC4254 syntax for wildcard bind
addresses.
(bz#1381)
- Remove extra backslashes in the RB_PROTOTYPE macro
definition.
(bz#1385)
- Support ssh(1) RekeyLimits up to the maximum allowed by
the
protocol: 2**32-1. (bz#1390)
- Enable IPV6_V6ONLY socket option on sshd(8) listen
socket, as is
already done for X11/TCP forwarding sockets. (bz#1392)
- Fix FD leak that could hang a ssh(1) connection
multiplexing
master. (bz#1398)
- Improve error messages when hostname resolution fails
due to a
system error. (bz#1417)
- Make ssh(1) -q option documentation consistent with
reality.
(bz#1427 bz#1429)
Portable OpenSSH bugs fixed:
- Fixed sshd(8) PAM support not calling
pam_session_close(), or
failing to call it with root privileges. (bz#926)
- Made sshd(8) use configuration-specified SyslogFacility
for
hosts_access(3) messages for denied connections.
(bz#1042)
- Implement getgrouplist(3) for AIX, enabling NSS LDAP to
work on
this platform. (bz#1081)
- Fix compilation errors on AIX due to misdefinition of
LLONG_MAX.
(bz#1347)
- Force use of local glob(3) implementation on Mac OS X
and FreeBSD,
as the platform versions lack features or have
unexpected
behaviour. (bz#1407)
- Reduce stdout/stderr noise from ssh-copy-id. (bz#1431)
- Fix activation of OpenSSL engine support when requested
in
configure. (bz#1437)
Checksums:
==========
- SHA1 (openssh-4.9.tar.gz) =
fa7d1b3dcb093bd0dfc643b33b1a57a26f459373
- SHA1 (openssh-4.9p1.tar.gz) =
91575878883065bd777f82b47e0d481ac69ee7fe
Reporting Bugs:
===============
- please read http://www.openssh
.com/report.html
and http://bugzilla.mindrot.
org/
OpenSSH is brought to you by Markus Friedl, Niels Provos,
Theo de Raadt,
Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre,
Tim Rice and
Ben Lindstrom.
============================================================
========
To update your installation, click on the "Install
Cygwin now" link on
the http://cygwin.com/ web
page. This downloads setup.exe to your
system. Then, run setup and answer all of the questions.
*** CYGWIN-ANNOUNCE UNSUBSCRIBE INFO ***
If you want to unsubscribe from the cygwin-announce mailing
list, look
at the "List-Unsubscribe: " tag in the email
header of this message.
Send email to the address specified there. It will be in
the format:
cygwin-announce-unsubscribe-you=3D3Dyourdomain.comcygwin.com
If you need more information on unsubscribing, start reading
here:
http://sources.redhat.com/lists.html#unsubscribe-simple
Please read *all* of the information on unsubscribing that
is available
starting at this URL.
--
Corinna Vinschen Please, send mails
regarding Cygwin to
Cygwin Project Co-Leader cygwin AT cygwin DOT com
Red Hat
--A205C7F5D9C.1207227912/starfire.sharedlog.com--
|