List Info

Thread: Real Proxy server reacting with RESETwhenAutoBandWidthDetecti
Real Proxy server reacting with RESETwhenAutoBandWidthDetecti
country flaguser name
India		 2008-04-24 04:38:22 

  


  

    

Hi Anuj,


 


At first glance the problem seems in Proxy. 
Since Auto Bandwidth Detection fetaure is more 
relevant for LAN/WAN, 


you can turn off this feature by removing feature 
HELIX_FEATURE_AUTO_BANDWIDTH_DETECTION in your profile file.


 


You can also disbale it by setting preference 
AutoBWDetection to 0. 


 


 


Thanks,



Anshuman


 



  
----- Original Message ----- 

  
  
  
Sent: Wednesday, April 23, 2008 10:12 
  PM

  
Subject: RE: [Nokia-private-dev] Real 
  Proxy server reacting with RESETwhenAutoBandWidthDetection turned ON

  


  

  
Hi,

  
 

  
Anshuman is looking 
  into this and will respond shortly.

  
 

  
Thank 
  you,


  
-leina

  
 

  

  

  

  

  
From: helixcommunity.org">nokia-private-dev-bounceshelixcommunity.org 
  [mailto:nokia-private-dev-bounceshelixcommunity.org] On Behalf Of nokia.com">ext-anuj.dhamijanokia.com
Sent: Tuesday, April 22, 2008 1:11 
  PM
To: helixcommunity.org">protocol-devhelixcommunity.org; 
  helixcommunity.org">nokia-private-devhelixcommunity.org
Subject: [Nokia-private-dev] Real Proxy 
  server reacting with RESET whenAutoBandWidthDetection turned 
  ON

  
 

  
 

  
Hi, 

  
We are finding this problem on one 
  of the sites where streaming sever would not connect when connected via Real 
  Proxy. It is able to connect and stream fine when connected directly. IP dump 
  shows that this is due to Proxy sending a reset back to client that causes 
  connection to fail.

  
Compared it with a dump where 
  server was able to connect via proxy. Comparison showed that in the latter 
  case AutoBWDetection is turned off on server side (turned ON on client by 
  default) whereas in former case (not working scenario) AutoBWDetection is 
  turned ON on both client and server. So we tried the first scenario with 
  AutoBWDetection disabled on client and this worked. So Proxy seems to be 
  sending reset due to one of AutoBWDetection related message 
  (GET_PARAMETER).

  
I understand that this is some 
  problem on the Proxy side and it must not send a TCP RESET in any case. 
  
Still I was wondering if it is 
  correct for Helix to keep AutoBWDetection enabled by default? Does this 
  parameter have any significance in Wireless networks? Isnt it relevant only in 
  LAN/WLAN networks?

  
IPDumps are 
  enclosed. 
Case1: Auto BW Detection 
  Cleint:Enable; Server:Enable ==> Not Working 
Case2: 
  Auto BW Detection Client:Enable; Sever: Disable ==> Working 
  
Case3: Auto BW Detection Client: 
  Disable; Sever: Enable ==> Working 

  
Comments and suggestions are 
  appreciated. 

  
Thnx & regds 
  
AD 

  
<<Capture.zip&gt;> 
  

  

  


  
_______________________________________________
Nokia-private-dev 
  mailing 
  list
Nokia-private-devhelixcommunity.org
http://lists.helixcommunity.org/mailman/listinfo/nokia-private-dev

  

  
  
   
     
    






 [1]











   
 





about | contact  Other archives ( Real Estate discussion Medical topics )