radeon RV350

Hi,

a tried a rv350 with directfb, but it completly fails with
softdevice.
Using this card with X11-Xorg 7.0 at least xv-out works.

Bought this card as a MSI RX9550. On startup I get the
following messages:
..
(*) DirectFB/Input: Keyboard 0.9 (convergence integrated
media GmbH)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: ATI Radeon 9600 (4153) 1.0 (Claudio
Ciccani)
(*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
[dfb] RAM: 134217600 bytes
[dfb] Accellerated Functions: FillRectange DrawRectange
DrawLine Blit All
[dfb] Drawing Flags: Xor
[dfb] Surface Blitting Flags: SrcColorkey
[dfb] Supported video Modes are: 1280x102432
[dfb] Enumerating display Layers
[dfb] Configuring CooperativeLevel for OSD
Layer 0 FBDev Primary Layer  Type: graphics
  Caps: brightness contrast saturation surface
Layer 1 Radeon CRTC1's Overlay  Type: graphics picture
video
  Caps: alphachannel brightness contrast deinterlacing
dst_colorkey hue opacity saturation screen_location surface
(!) [10599:    0.000] --> Caught signal 11 (at
0xb4ff9544, invalid permissions) <--

Will try a second test with current DirectFB cvs version.

-- 
Stefan Lucke

_______________________________________________
directfb-dev mailing list
directfb-devdirectfb.org
http://mail.directfb.org/cgi-bin/mailman/listinfo/
directfb-dev

Stefan Lucke wrote:
> Hi,
> 
> a tried a rv350 with directfb, but it completly fails
with softdevice.
> Using this card with X11-Xorg 7.0 at least xv-out
works.
> 
> Bought this card as a MSI RX9550. On startup I get the
following messages:
> ..
> (*) DirectFB/Input: Keyboard 0.9 (convergence
integrated media GmbH)
> (*) DirectFB/Genefx: MMX detected and enabled
> (*) DirectFB/Graphics: ATI Radeon 9600 (4153) 1.0
(Claudio Ciccani)
> (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
> [dfb] RAM: 134217600 bytes
> [dfb] Accellerated Functions: FillRectange DrawRectange
DrawLine Blit All
> [dfb] Drawing Flags: Xor
> [dfb] Surface Blitting Flags: SrcColorkey
> [dfb] Supported video Modes are: 1280x102432
> [dfb] Enumerating display Layers
> [dfb] Configuring CooperativeLevel for OSD
> Layer 0 FBDev Primary Layer  Type: graphics
>   Caps: brightness contrast saturation surface
> Layer 1 Radeon CRTC1's Overlay  Type: graphics picture
video
>   Caps: alphachannel brightness contrast deinterlacing
dst_colorkey hue opacity saturation screen_location surface
> (!) [10599:    0.000] --> Caught signal 11 (at
0xb4ff9544, invalid permissions) <--
> 
> Will try a second test with current DirectFB cvs
version.
> 

In the current CVS the problem was solved.

There is similar thread, however:
http://mail.directfb.org/pipermail/directfb
-dev/2006-June/001901.html

-- 
Regards,
      Claudio Ciccani

klanusers.sf.net
http://directfb.org
http://sf.net/pro
jects/php-directfb

_______________________________________________
directfb-dev mailing list
directfb-devdirectfb.org
http://mail.directfb.org/cgi-bin/mailman/listinfo/
directfb-dev

On Dienstag 27 Juni 2006 12:14, Claudio Ciccani wrote:
> Stefan Lucke wrote:
> > Hi,
> > 
> > a tried a rv350 with directfb, but it completly
fails with softdevice.
> > Using this card with X11-Xorg 7.0 at least xv-out
works.
> > 
> > Bought this card as a MSI RX9550. On startup I get
the following messages:
> > ..
> > (*) DirectFB/Input: Keyboard 0.9 (convergence
integrated media GmbH)
> > (*) DirectFB/Genefx: MMX detected and enabled
> > (*) DirectFB/Graphics: ATI Radeon 9600 (4153) 1.0
(Claudio Ciccani)
> > (*) DirectFB/Core/WM: Default 0.2 (Convergence
GmbH)
> > [dfb] RAM: 134217600 bytes

Grrrrr.
It seems be be a card with bad memory, as with vidix i got 
OSD only and
only a static video picture with constant vertical color
stripes. 

In vidix I could circumvent that by reducing the available
video memory to 64M  .

But with current DirectFB cvs it works ) even
without 
videoram-limit=xx in /etc/directfbrc .

Is directfb memory allocation top -> down or bottom ->
up ?
Or is it the missing radeon-r300fix ?

(*) DirectFB/Core: Single Application Core. (2006-08-09
05:46)

(!) DirectFB/Radeon: You are running a buggy version of
radeonfb!
     -> Please, apply the kernel patch named
radeonfb-r300fix.
(*) DirectFB/Radeon: 3D Acceleration will be disabled.
(*) DirectFB/Graphics: ATI Radeon 9600 (4153) 1.0 (Claudio
Ciccani)
(*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
[dfb] RAM: 134217600 bytes


-- 
Stefan Lucke

_______________________________________________
directfb-dev mailing list
directfb-devdirectfb.org
http://mail.directfb.org/cgi-bin/mailman/listinfo/
directfb-dev

Stefan Lucke wrote:
> On Dienstag 27 Juni 2006 12:14, Claudio Ciccani wrote:
>> Stefan Lucke wrote:
>>> Hi,
>>>
>>> a tried a rv350 with directfb, but it completly
fails with softdevice.
>>> Using this card with X11-Xorg 7.0 at least
xv-out works.
>>>
>>> Bought this card as a MSI RX9550. On startup I
get the following messages:
>>> ..
>>> (*) DirectFB/Input: Keyboard 0.9 (convergence
integrated media GmbH)
>>> (*) DirectFB/Genefx: MMX detected and enabled
>>> (*) DirectFB/Graphics: ATI Radeon 9600 (4153)
1.0 (Claudio Ciccani)
>>> (*) DirectFB/Core/WM: Default 0.2 (Convergence
GmbH)
>>> [dfb] RAM: 134217600 bytes
> 
> Grrrrr.
> It seems be be a card with bad memory, as with vidix i
got  OSD only and
> only a static video picture with constant vertical
color stripes. 
> 
> In vidix I could circumvent that by reducing the
available video memory to 64M  .
> 
> But with current DirectFB cvs it works ) even
without 
> videoram-limit=xx in /etc/directfbrc .
> 
> Is directfb memory allocation top -> down or bottom
-> up ?

Top -> down.

> Or is it the missing radeon-r300fix ?

The patch is under the patch directory of DirectFB.
I don't think it will solve the problem of the video
memory,
but give it a try if you want.

> 
> (*) DirectFB/Core: Single Application Core. (2006-08-09
05:46)
> 
> (!) DirectFB/Radeon: You are running a buggy version of
radeonfb!
>      -> Please, apply the kernel patch named
radeonfb-r300fix.
> (*) DirectFB/Radeon: 3D Acceleration will be disabled.
> (*) DirectFB/Graphics: ATI Radeon 9600 (4153) 1.0
(Claudio Ciccani)
> (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
> [dfb] RAM: 134217600 bytes
> 
> 


-- 
Regards,
     Claudio Ciccani

klanusers.sf.net
http://directfb.org
http://sf.net/pro
jects/php-directfb

_______________________________________________
directfb-dev mailing list
directfb-devdirectfb.org
http://mail.directfb.org/cgi-bin/mailman/listinfo/
directfb-dev

Claudio Ciccani wrote:
> Stefan Lucke wrote:
>> On Dienstag 27 Juni 2006 12:14, Claudio Ciccani
wrote:
>>> Stefan Lucke wrote:
>>>> Hi,
>>>>
>>>> a tried a rv350 with directfb, but it
completly fails with softdevice.
>>>> Using this card with X11-Xorg 7.0 at least
xv-out works.
>>>>
>>>> Bought this card as a MSI RX9550. On
startup I get the following messages:
>>>> ..
>>>> (*) DirectFB/Input: Keyboard 0.9
(convergence integrated media GmbH)
>>>> (*) DirectFB/Genefx: MMX detected and
enabled
>>>> (*) DirectFB/Graphics: ATI Radeon 9600
(4153) 1.0 (Claudio Ciccani)
>>>> (*) DirectFB/Core/WM: Default 0.2
(Convergence GmbH)
>>>> [dfb] RAM: 134217600 bytes
>> Grrrrr.
>> It seems be be a card with bad memory, as with
vidix i got  OSD only and
>> only a static video picture with constant vertical
color stripes. 
>>
>> In vidix I could circumvent that by reducing the
available video memory to 64M  .
>>
>> But with current DirectFB cvs it works ) even
without 
>> videoram-limit=xx in /etc/directfbrc .
>>
>> Is directfb memory allocation top -> down or
bottom -> up ?
> 
> Top -> down.
> 

Lapsus. It's bottom -> up.

-- 
Regards,
     Claudio Ciccani

klanusers.sf.net
http://directfb.org
http://sf.net/pro
jects/php-directfb

_______________________________________________
directfb-dev mailing list
directfb-devdirectfb.org
http://mail.directfb.org/cgi-bin/mailman/listinfo/
directfb-dev

Claudio Ciccani wrote:
> Claudio Ciccani wrote:
>> Stefan Lucke wrote:
>>> On Dienstag 27 Juni 2006 12:14, Claudio Ciccani
wrote:
>>>> Stefan Lucke wrote:
>>>>> Hi,
>>>>>
>>>>> a tried a rv350 with directfb, but it
completly fails with softdevice.
>>>>> Using this card with X11-Xorg 7.0 at
least xv-out works.
>>>>>
>>>>> Bought this card as a MSI RX9550. On
startup I get the following messages:
>>>>> ..
>>>>> (*) DirectFB/Input: Keyboard 0.9
(convergence integrated media GmbH)
>>>>> (*) DirectFB/Genefx: MMX detected and
enabled
>>>>> (*) DirectFB/Graphics: ATI Radeon 9600
(4153) 1.0 (Claudio Ciccani)
>>>>> (*) DirectFB/Core/WM: Default 0.2
(Convergence GmbH)
>>>>> [dfb] RAM: 134217600 bytes
>>> Grrrrr.
>>> It seems be be a card with bad memory, as with
vidix i got  OSD only and
>>> only a static video picture with constant
vertical color stripes. 
>>>
>>> In vidix I could circumvent that by reducing
the available video memory to 64M  .
>>>
>>> But with current DirectFB cvs it works ) even
without 
>>> videoram-limit=xx in /etc/directfbrc .
>>>
>>> Is directfb memory allocation top -> down or
bottom -> up ?
>> Top -> down.
>>
> 
> Lapsus. It's bottom -> up.

It starts to allocate at the end, I think you can say either
top or 
bottom to it 

-- 
Best regards,
   Denis Oliver Kropp

.------------------------------------------.
| DirectFB - Hardware accelerated graphics |
| http://www.directfb.org/
                |
"------------------------------------------"

_______________________________________________
directfb-dev mailing list
directfb-devdirectfb.org
http://mail.directfb.org/cgi-bin/mailman/listinfo/
directfb-dev