Error when reading from Fujitsu fi-5120c

power cycle the scanner, and run this command as root:

SANE_DEBUG_FUJITSU=15 scanimage --help 2>5120.log

then lets see the 5120.log file.

allan

On Mon, 21 Aug 2006, Matthew wrote:

> I'm using Ubuntu 6.06 with all the latest updates and
Sane backend 1.0.18 
> compiled from source along with Xsane .0991.
>
> When I try to scan using scanimage or xsane either as
root or as normal user 
> I get the following error.
>
> "Error during read: Error during device
I/O."
>
> I've read just about every instruction on setting up
Sane and so far I can't 
> get it to work.  I did get it to work once, but then it
stopped. I believe I 
> manually changed the usb permissions.  I've tried to
figure out the hotplug 
> stuff, but so far I've failed at everything.
>
> Can anybody tell me what I'm doing wrong or not doing?
>
>
>

-- 
"so don't tell us it can't be done, putting down
what you don't know.
money isn't our god, integrity will free our souls" -
Max Cavalera

-- 
sane-devel mailing list: sane-devellists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-d
evel
Unsubscribe: Send mail with subject "unsubscribe
your_password"
             to sane-devel-requestlists.alioth.debian.org

Thanks for the help, but I finally figured it out.

The information I found was located here:
http://support.novell.com/techc
enter/sdb/en/2005/09/jsmeix_scanner-setup-100.html

It's for Suse and I'm not sure it will provide much help
to anyone not
running suse, but you can always give it a go.


-- 
sane-devel mailing list: sane-devellists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-d
evel
Unsubscribe: Send mail with subject "unsubscribe
your_password"
             to sane-devel-requestlists.alioth.debian.org

Well, I only thought I was out of the water.  Tried to scan
today and
got the same IO error problem.  Even worse is it might scan
one or two
pages and then error out.

Here is the log.

****
[sanei_debug] Setting debug level of fujitsu to 15.
[fujitsu] sane_init: start
[fujitsu] sane_init: fujitsu backend 1.0.33, from
sane-backends 1.0.18
[fujitsu] sane_init: finish
[fujitsu] sane_get_devices: start
[fujitsu] find_scanners: start
[fujitsu] find_scanners: reading config file fujitsu.conf
[fujitsu] find_scanners: setting "buffer-size"
to 65536
[fujitsu] find_scanners: looking for 'scsi FUJITSU'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1041'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1042'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1096'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1097'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10ae'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10af'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10e0'
[fujitsu] attach_one: start
[fujitsu] attach_one: looking for 'libusb:005:004'
[fujitsu] connect_fd: start
[fujitsu] connect_fd: opening USB device
[fujitsu] wait_scanner: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: finish
[fujitsu] init_inquire: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_inquire: Found FUJITSU scanner fi-5120Cdj
version 0C00 at
libusb:005:004
[fujitsu] inquiry options
[fujitsu]   color offset: 0 lines
[fujitsu]   duplex offset: 0 lines
[fujitsu] init_inquire: finish
[fujitsu] init_vpd: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] standard options
[fujitsu]   basic x res: 600 dpi
[fujitsu]   basic y res: 600 dpi
[fujitsu]   step x res: 1 dpi
[fujitsu]   step y res: 1 dpi
[fujitsu]   max x res: 600 dpi
[fujitsu]   max y res: 600 dpi
[fujitsu]   min x res: 50 dpi
[fujitsu]   min y res: 50 dpi
[fujitsu]   60 dpi: 1
[fujitsu]   75 dpi: 1
[fujitsu]   100 dpi: 1
[fujitsu]   120 dpi: 1
[fujitsu]   150 dpi: 1
[fujitsu]   160 dpi: 1
[fujitsu]   180 dpi: 1
[fujitsu]   200 dpi: 1
[fujitsu]   240 dpi: 1
[fujitsu]   300 dpi: 1
[fujitsu]   320 dpi: 1
[fujitsu]   400 dpi: 1
[fujitsu]   480 dpi: 1
[fujitsu]   600 dpi: 1
[fujitsu]   800 dpi: 0
[fujitsu]   1200 dpi: 0
[fujitsu]   max width: 8.85 inches
[fujitsu]   max length: 34.00 inches
[fujitsu]   overflow: 1
[fujitsu]   monochrome: 1
[fujitsu]   halftone: 1
[fujitsu]   grayscale: 1
[fujitsu]   color_monochrome: 0
[fujitsu]   color_halftone: 0
[fujitsu]   color_grayscale: 1
[fujitsu] vendor options
[fujitsu]   operator panel: 1
[fujitsu]   barcode: 0
[fujitsu]   imprinter: 0
[fujitsu]   duplex: 1
[fujitsu]   transparency: 0
[fujitsu]   flatbed: 0
[fujitsu]   adf: 1
[fujitsu]   A/D bits: 10
[fujitsu]   buffer bytes: 16777216
[fujitsu]   subwindow cmd: 0
[fujitsu]   endorser cmd: 0
[fujitsu]   hardware status cmd: 1
[fujitsu]   scanner control cmd: 1
[fujitsu]   brightness steps: 0
[fujitsu]   threshold steps: 255
[fujitsu]   contrast steps: 0
[fujitsu]   built in gamma patterns: 0
[fujitsu]   download gamma patterns: 1
[fujitsu]   built in dither patterns: 4
[fujitsu]   download dither patterns: 1
[fujitsu]   black and white rif: 1
[fujitsu]   automatic binary DTC: 0
[fujitsu]   simplified DTC: 1
[fujitsu]   outline extraction: 0
[fujitsu]   image emphasis: 1
[fujitsu]   automatic separation: 0
[fujitsu]   mirror image: 0
[fujitsu]   white level follower: 0
[fujitsu]   subwindow: 0
[fujitsu]   compression MH: 0
[fujitsu]   compression MR: 0
[fujitsu]   compression MMR: 0
[fujitsu]   compression JBIG: 0
[fujitsu]   compression JPG1: 1
[fujitsu]   compression JPG2: 0
[fujitsu]   compression JPG3: 0
[fujitsu] init_vpd: finish
[fujitsu] init_model: start
[fujitsu] init_model: finish
[fujitsu] init_options: start
[fujitsu] init_options: finish
[fujitsu] disconnect_fd: start
[fujitsu] disconnecting usb device
[fujitsu] disconnect_fd: finish
[fujitsu] attach_one: finish
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10e1'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10e7'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10fe'
[fujitsu] find_scanners: found scanner libusb:005:004
[fujitsu] find_scanners: found 1 scanner(s)
[fujitsu] find_scanners: finish
[fujitsu] sane_get_devices: finish
[fujitsu] sane_open: start
[fujitsu] sane_open: searching currently attached scanners
[fujitsu] sane_open: device libusb:005:004 requested
[fujitsu] sane_open: device libusb:005:004 found
[fujitsu] connect_fd: start
[fujitsu] connect_fd: opening USB device
[fujitsu] wait_scanner: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: finish
[fujitsu] sane_open: finish
[fujitsu] sane_get_devices: start
[fujitsu] find_scanners: start
[fujitsu] find_scanners: reading config file fujitsu.conf
[fujitsu] find_scanners: setting "buffer-size"
to 65536
[fujitsu] find_scanners: looking for 'scsi FUJITSU'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1041'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1042'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1096'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1097'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10ae'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10af'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10e0'
[fujitsu] attach_one: start
[fujitsu] attach_one: looking for 'libusb:005:004'
[fujitsu] attach_one: already attached!
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10e1'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10e7'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10fe'
[fujitsu] find_scanners: found scanner libusb:005:004
[fujitsu] find_scanners: found 1 scanner(s)
[fujitsu] find_scanners: finish
[fujitsu] sane_get_devices: finish
[fujitsu] sane_close: start
[fujitsu] do_cancel: start
[fujitsu] do_cancel: finish
[fujitsu] disconnect_fd: start
[fujitsu] disconnecting usb device
[fujitsu] disconnect_fd: finish
[fujitsu] sane_close: finish
[fujitsu] sane_exit: start
[fujitsu] disconnect_fd: start
[fujitsu] disconnect_fd: finish
[fujitsu] sane_exit: finish
****


-- 
sane-devel mailing list: sane-devellists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-d
evel
Unsubscribe: Send mail with subject "unsubscribe
your_password"
             to sane-devel-requestlists.alioth.debian.org