User set up instr.?

I hope this is not a duplicate message but I never received
my Cc. so I 
am re-sending -


*Henning Meier-Geinitz wrote
> *Hi,
>
> On 2006-09-25 12:40, Bob Goodwin wrote:
> *
>> *Is there a step by step instruction for setting up
sane?
>> *
> *
> Lots of. Start with man sane (section
"PROBLEMS"). See the SANE
> website for more docu.
>
> *
>> *found USB scanner (vendor=0x03f0, product=0x0701)
at libusb:001:002
>> *
> *
> So it's found by the kernel.
>
> *
>> *and scanimage -L
>> *
> *
> (not)
>
> Check if "avision" is listed and not
commented out in
> /etc/sane.d/dll.conf.
> *
cat /etc/sane.d/dll.conf
# enable the next line if you want to allow access through
the network:
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon

--------------------  snip  -----------------------

#test
u12
umax
#umax_pp
umax1220u
v4l
#
# The following backends are not included in the
sane-backends distribution
# If you want to use them, download them from their webpages
and read their
# documentation
#
# HP OfficeJet backend homepage: http://hpoj.sf.net/
# Uncomment the following line if hpoj is installed:
#hpoj
hpaio

> *
> Send us the output of
>
> scanimage --version
> *
scanimage --version
scanimage (sane-backends) 1.0.18; backend version 1.0.18
> *and
> SANE_DEBUG_AVISION=255 scanimage -L
> *
SANE_DEBUG_AVISION=255 scanimage -L
[sanei_debug] Setting debug level of avision to 255.
[avision] sane_init:(Version: 1.0 Build: 201)
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 1: ignoring empty line
[avision] sane_init: parsing config line "# This are
the possible 
options. Normally any scanner"
[avision] sane_init: config file line 2: ignoring comment
line
[avision] sane_init: parsing config line "# should work
just fine 
without them - and they are only"
[avision] sane_init: config file line 3: ignoring comment
line
[avision] sane_init: parsing config line "# needed for
test and 
debugging. So if you experience problems"
[avision] sane_init: config file line 4: ignoring comment
line
[avision] sane_init: parsing config line "# and you
solve them with 
enabling options here, please notify"
[avision] sane_init: config file line 5: ignoring comment
line
[avision] sane_init: parsing config line "# the
SANE/Avision maintainer: 
Rene Rebe <reneexactcode.de>"
[avision] sane_init: config file line 6: ignoring comment
line
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 7: ignoring empty line
[avision] sane_init: parsing config line "#option
disable-gamma-table"
[avision] sane_init: config file line 8: ignoring comment
line
[avision] sane_init: parsing config line "#option
disable-calibration"
[avision] sane_init: config file line 9: ignoring comment
line
[avision] sane_init: parsing config line "#option
force-a4"
[avision] sane_init: config file line 10: ignoring comment
line
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 11: ignoring empty
line
[avision] sane_init: parsing config line "#scsi
AVISION"
[avision] sane_init: config file line 12: ignoring comment
line
[avision] sane_init: parsing config line "#scsi
FCPA"
[avision] sane_init: config file line 13: ignoring comment
line
[avision] sane_init: parsing config line "#scsi
MINOLTA"
[avision] sane_init: config file line 14: ignoring comment
line
[avision] sane_init: parsing config line "#scsi
MITSBISH MCA-S600C"
[avision] sane_init: config file line 15: ignoring comment
line
[avision] sane_init: parsing config line "#scsi
MITSBISH MCA-SS600"
[avision] sane_init: config file line 16: ignoring comment
line
[avision] sane_init: parsing config line "#scsi
HP"
[avision] sane_init: config file line 17: ignoring comment
line
[avision] sane_init: parsing config line "#scsi
hp"
[avision] sane_init: config file line 18: ignoring comment
line
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 19: ignoring empty
line
[avision] sane_init: parsing config line "#scsi
/dev/scanner"
[avision] sane_init: config file line 20: ignoring comment
line
[avision] sane_init: parsing config line "usb
libusb:001:002"
[avision] sane_init: config file line 21: trying to attach
USB:`usb 
libusb:001:002'
[avision] sane_init: parsing config line "usb 0x03f0
0x0701"
[avision] sane_init: config file line 22: trying to attach
USB:`usb 
0x03f0 0x0701'
[avision] attach:
[avision] attach: opening libusb:001:002
[avision] attach: open failed (Invalid argument)
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 23: ignoring empty
line
[avision] sane_init: Trying to find USB device 638 a27 ...
[avision] sane_init: Trying to find USB device 638 a3c ...
[avision] sane_init: Trying to find USB device 638 a33 ...
[avision] sane_init: Trying to find USB device 638 a24 ...
[avision] sane_init: Trying to find USB device 638 a25 ...
[avision] sane_init: Trying to find USB device 638 a3a ...
[avision] sane_init: Trying to find USB device 638 a23 ...
[avision] sane_init: Trying to find USB device 638 a2a ...
[avision] sane_init: Trying to find USB device 638 a2a ...
[avision] sane_init: Trying to find USB device 638 a19 ...
[avision] sane_init: Trying to find USB device 638 a41 ...
[avision] sane_init: Trying to find USB device 638 a16 ...
[avision] sane_init: Trying to find USB device 638 a13 ...
[avision] sane_init: Trying to find USB device 638 a18 ...
[avision] sane_init: Trying to find USB device 638 a66 ...
[avision] sane_init: Trying to find USB device 638 a40 ...
[avision] sane_init: Trying to find USB device 638 a68 ...
[avision] sane_init: Trying to find USB device 638 a61 ...
[avision] sane_init: Trying to find USB device 638 a45 ...
[avision] sane_init: Trying to find USB device 3f0 701 ...
[avision] attach:
[avision] attach: opening libusb:001:002
[avision] attach: open failed (Invalid argument)
[avision] sane_init: Trying to find USB device 3f0 701 ...
[avision] attach:
[avision] attach: opening libusb:001:002
[avision] attach: open failed (Invalid argument)
[avision] sane_init: Trying to find USB device 3f0 801 ...
[avision] sane_init: Trying to find USB device 3f0 b01 ...
[avision] sane_init: Trying to find USB device 638 26a ...
[avision] sane_init: Trying to find USB device 686 4004 ...
[avision] sane_init: Trying to find USB device 686 400d ...
[avision] sane_init: Trying to find USB device 686 400e ...
[avision] sane_init: Trying to find USB device 638 a15 ...
[avision] sane_init: Trying to find USB device 638 a16 ...
[avision] sane_init: Trying to find USB device 4c5 1029 ...
[avision] sane_init: Trying to find USB device 40a 6001 ...
[avision] sane_init: Trying to find USB device 40a 6002 ...
[avision] sane_init: Trying to find USB device 40a 6003 ...
[avision] sane_init: Trying to find USB device 40a 6004 ...
[avision] sane_init: Trying to find USB device 40a 6005 ...
[avision] sane_init: Trying to find USB device 638 268 ...
[avision] sane_init: Trying to find USB device 4a7 449 ...
[avision] sane_init: Trying to find USB device 4a7 44c ...
[avision] sane_init: Trying to find USB device 4a7 475 ...
[avision] sane_get_devices:

No scanners were identified. If you were expecting something
different,
check that the scanner is plugged in, turned on and detected
by the
sane-find-scanner tool (if appropriate). Please read the
documentation
which came with this software (README, FAQ, manpages).
[avision] sane_exit:


A lot of data!  Thanks for any help you can provide.

Bob Goodwin


> *
> Bye,
> Henning
>
> *



-- 
sane-devel mailing list: sane-devellists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-d
evel
Unsubscribe: Send mail with subject "unsubscribe
your_password"
             to sane-devel-requestlists.alioth.debian.org