Please help with CanoScan LIDE 25 (was: CanoScan LIDE 25)

Rodolfo Medina <rodolfo.medinagmail.com> writes:

> [...] I bought a brand new
> CanoScan LIDE 25. It seems to be seen by `sane-find
scanner', in fact:
>
>  # sane-find-scanner
>
>  [...]
>
>  found USB scanner (vendor=0x04a9 [Canon],
product=0x2220 [CanoScan], chip=LM9832/3) at libusb:001:003
>
> . At ht
tp://www.sane-project.org/sane-mfgs.html#Z-CANON 
> it is said that the device is supported by the plustek
backend.
> Please can anyone suggest where I can find it and how I
can install it?



From

 http://www.sane-project.o
rg

I downloaded sane-backends-1.0.18.tar.gz, and from

 http://www
.gjaeger.de/scanner/plustek.html

I downloaded plustek-usb-0.51.14.tar.gz, then followed the
steps described in
the plustek documentation: 


------------------------------------------------------------
-----------
Change to your home directory and create a sane directory
cd ~
mkdir sane

unpack your sane tar-ball (here
"sane-backends-1.0.9.tar.gz")
to this "sane" directory

cd sane
tar xvzf /tmp/sane-backends-1.0.9.tar.gz

Now unpack your plustek-sane tarball (here
"plustek-sane-0.45-1.tar.gz")
to the backends directory:

cd sane-backends-1.0.9
tar xvzf /tmp/plustek-sane-0.45-1.tar.gz

Now do the ./configure step...
Especially for SuSE with a preinstalled SANE-RPM:
./configure --prefix=/usr --sysconfdir=/etc
--mandir=/usr/share/man --infodir=/usr/share/info

Then do the make step and after that as root user perform
the make install
step.

That's all!
------------------------------------------------------------
--------



. Then I did `# sane-find-scanner' and got the output:

 found USB scanner (vendor=0x04a9 [Canon], product=0x2220
[CanoScan], chip=LM9832/3) at libusb:001:002

. Then I added to plustek.conf the following lines:

 [usb] 0x04a9 0x2220
 device libusb:001:002

, but still `# scanimage -h' gives the following:

 scanimage: no SANE devices found

. I'm lost here, please a help...

Thanks,
Rodolfo


-- 
sane-devel mailing list: sane-devellists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-d
evel
Unsubscribe: Send mail with subject "unsubscribe
your_password"
             to sane-devel-requestlists.alioth.debian.org

On Thursday 19 October 2006 17:03, Rodolfo Medina wrote:
> Rodolfo Medina <rodolfo.medinagmail.com> writes:
> 
> > [...] I bought a brand new
> > CanoScan LIDE 25. It seems to be seen by
`sane-find scanner', in fact:
> >
> >  # sane-find-scanner
> >
> >  [...]
> >
> >  found USB scanner (vendor=0x04a9 [Canon],
product=0x2220 [CanoScan], chip=LM9832/3) at libusb:001:003
> >
> > . At ht
tp://www.sane-project.org/sane-mfgs.html#Z-CANON 
> > it is said that the device is supported by the
plustek backend.
> > Please can anyone suggest where I can find it and
how I can install it?

1. when retrieving a sane snapshot, there's no need to
download additional stuff
2. check the /etc/sane.d/dll.conf if the plustek backend is
enabled 
3. send the debug output, i.e. export SANE_DEBUG_PLUSTEK=20
; scanimage -L

Gerhard


-- 
sane-devel mailing list: sane-devellists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-d
evel
Unsubscribe: Send mail with subject "unsubscribe
your_password"
             to sane-devel-requestlists.alioth.debian.org