|
List Info Thread: Formulardaten
[1]
|
||||||||||||
|
about | contact Other archives ( Real Estate discussion Medical topics ) |
||||||||||||
Formulardaten |
|
List Info Thread: Formulardaten
[1]
|
||||||||||||
|
about | contact Other archives ( Real Estate discussion Medical topics ) |
||||||||||||
softwork.com.pl'
2. Manufacturer (e.g. "Mustek"):
'BENQ'
3. Model name (e.g. ScanExpress 1200UB):
'5250C'
4. Bus type:
'USB'
5. Vendor id (e.g. 0x001):
'04a5'
6. Product id (e.g. 0x0002):
'2137'
7. Chipset (e.g. lm9831):
'see in DATA section (send me a mail if I will help You
somehow, thanks for help)'
8. Comments (e.g. similar to Mustek 1234):
'hardware identical to 5150, but actual driver have
static calibration data, which make vertical color box on
every document (with PRISM5300) or scan only 1/4 document
(with PRISM5150)'
9. Data (e.g. sane-find-scanner -v -v):
'=============================================
find-scanner
fujitsu ~ # sane-find-scanner
# sane-find-scanner will now attempt to detect your
scanner. If the
# result is different from what you expected, first make
sure your
# scanner is powered up and properly connected to your
computer.
# No SCSI scanners found. If you expected something
different, make sure that
# you have loaded a kernel SCSI driver for your SCSI
adapter.
# Also you need support for SCSI Generic (sg) in your
operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x04a5 [Color], product=0x2137 [
FlatbedScanner 22]) at libusb:001:003
# Your USB scanner was (probably) detected. It may or may
not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other
proprietary ports
# can't be detected by this program.
=========================================== and lsusb -v :
Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.18-gentoo-r2 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0x00
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.18-gentoo-r2 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0x00
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.18-gentoo-r2 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0x00
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Bus 001 Device 003: ID 04a5:2137 Acer Peripherals Inc. (now
BenQ Corp.)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x04a5 Acer Peripherals Inc. (now BenQ
Corp.)
idProduct 0x2137
bcdDevice 1.10
iManufacturer 1 Color
iProduct 2 FlatbedScanner 22
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 16
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.18-gentoo-r2 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0x00
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
============================================= tailf
/var/log/message
Apr 2 12:41:07 fujitsu hub 1-0:1.0: state 7 ports 6 chg
0000 evt 0002
Apr 2 12:41:07 fujitsu ehci_hcd 0000:00:1d.7: GetStatus
port 1 status 001803 POWER sig=j CSC CONNECT
Apr 2 12:41:07 fujitsu hub 1-0:1.0: port 1, status 0501,
change 0001, 480 Mb/s
Apr 2 12:41:07 fujitsu hub 1-0:1.0: debounce: port 1: total
100ms stable 100ms status 0x501
Apr 2 12:41:08 fujitsu ehci_hcd 0000:00:1d.7: port 1 high
speed
Apr 2 12:41:08 fujitsu ehci_hcd 0000:00:1d.7: GetStatus
port 1 status 001005 POWER sig=se0 PE CONNECT
Apr 2 12:41:08 fujitsu usb 1-1: new high speed USB device
using ehci_hcd and address 4
Apr 2 12:41:08 fujitsu ehci_hcd 0000:00:1d.7: port 1 high
speed
Apr 2 12:41:08 fujitsu ehci_hcd 0000:00:1d.7: GetStatus
port 1 status 001005 POWER sig=se0 PE CONNECT
Apr 2 12:41:08 fujitsu usb 1-1: default language 0x0409
Apr 2 12:41:08 fujitsu usb 1-1: new device strings: Mfr=1,
Product=2, SerialNumber=0
Apr 2 12:41:08 fujitsu usb 1-1: Product: FlatbedScanner
22
Apr 2 12:41:08 fujitsu usb 1-1: Manufacturer: Color
Apr 2 12:41:08 fujitsu usb 1-1: uevent
Apr 2 12:41:08 fujitsu usb 1-1: configuration #1 chosen
from 1 choice
Apr 2 12:41:08 fujitsu usb 1-1: adding 1-1:1.0 (config #1,
interface 0)
Apr 2 12:41:08 fujitsu usb 1-1:1.0: uevent
Apr 2 12:41:08 fujitsu drivers/usb/core/inode.c: creating
file '004'
'
--
sane-devel mailing list: sane-devel