Big problem with fi-5650c under linux

Hello All,

I have bought a fi-5650c scanner to replace a fi-4120c.
In addition, I have a new linux server.

The new scanner is fine, it works ok when I connect it
instead to my old server.
The new server is also fine: the old fi-4120c scanner works
ok on the new server.

The problem is that the new fi-5650c scanner does not
operate when I connect it to the new server: 
scanner is recognized ok and the adf starts feeding but
stops halfway, before any real scanning:

Here is an excerpt from the debug output (full text below):

[fujitsu] sense_handler: start
[fujitsu] Sense=0x5, ASC=0x26, ASCQ=00, EOM=1, ILI=0,
info=00000000
[fujitsu] Illegal request: invalid field in parm list
[fujitsu] Offending byte is 00
[fujitsu] do_scsi_cmd: return 'Invalid argument'

This looks like a software bug, because the scanner
functions ok.
I would report it as a bug, if I knew more about the cause.

My old server:
- kernel:  2.6.8-2-686
- cpu:     Intel Celeron
- scsi:    LSI Logic / Symbios Logic 53c810 (rev 23)
- libsane: 1.0.18-3

My new server
- kernel:  2.6.18-4-amd64
- cpu:     Dual Core AMD Opteron
- scsi:    Adaptec AHA-7850 (rev 03)
- libsane: 1.0.18-6

I am not sure where to look; my choices seem limited and/or
futile:
- I have a k7 server that I could try, but what would be the
point?
- I could try swopping scsi cards, but that is probably
futile
- USB is not an option for this scanner, according to
libusb.

Unfortunately, the reported scanner dialogues have really
changed from sane 1.0.18-3 to 1.0.18-6

The most likely cause is some change in the sanei area,
because the fujitsu backend is not changed, 
according to a brief inspection of cvs.

Most likely short term solution: fall back to 1.0.18-3
But how can I retrieve the 1.0.18-3 sources from cvs???

Another minor problem of the fi-5650 under sane is that each
pixel row is shifted by one pixel 
relative to the previous row, making the output image look
slanted. My own software can compensate 
for this, so it is not a big problem. However, it may be
related (who knows).

Thanks for any help.
Guus.


[sanei_debug] Setting debug level of fujitsu to 10.
[fujitsu] sane_init: start
[fujitsu] sane_init: fujitsu backend 1.0.33, from
sane-backends 1.0.18
[fujitsu] sane_init: finish
[fujitsu] sane_get_devices: start
[fujitsu] find_scanners: start
[fujitsu] attach_one: start
[fujitsu] connect_fd: start
[fujitsu] wait_scanner: start
[fujitsu] do_scsi_cmd: start
[fujitsu] do_scsi_cmd: finish
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: finish
[fujitsu] init_inquire: start
[fujitsu] do_scsi_cmd: start
[fujitsu] do_scsi_cmd: finish
[fujitsu] init_inquire: finish
[fujitsu] init_vpd: start
[fujitsu] do_scsi_cmd: start
[fujitsu] do_scsi_cmd: finish
[fujitsu] init_vpd: finish
[fujitsu] init_model: start
[fujitsu] init_model: finish
[fujitsu] init_options: start
[fujitsu] init_options: finish
[fujitsu] disconnect_fd: start
[fujitsu] disconnect_fd: finish
[fujitsu] attach_one: finish
[fujitsu] find_scanners: finish
[fujitsu] sane_get_devices: finish
[fujitsu] sane_open: start
[fujitsu] connect_fd: start
[fujitsu] wait_scanner: start
[fujitsu] do_scsi_cmd: start
[fujitsu] do_scsi_cmd: finish
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: finish
[fujitsu] sane_open: finish
scanadf: rounded value of br-x from 215.872 to 215.872
scanadf: rounded value of br-y from 279.364 to 279.364
[fujitsu] sane_start: start
[fujitsu] scanner_control: start
[fujitsu] do_scsi_cmd: start
[fujitsu] do_scsi_cmd: finish
[fujitsu] scanner_control: finish
[fujitsu] calculateDerivedValues: start
[fujitsu] xres=600, tlx=0, brx=10200, pw=10200, maxx=14592
[fujitsu] yres=600, tly=0, bry=13200, ph=13200, maxy=40800
[fujitsu] xres=600, tlx=0, brx=10208, pw=10200, maxx=14592
[fujitsu] yres=600, tly=0, bry=13200, ph=13200, maxy=40800
[fujitsu] calculateDerivedValues: finish
[fujitsu] setup_buffers: start
[fujitsu] setup_buffers: finish
[fujitsu] set_window: start
[fujitsu] do_scsi_cmd: start
[fujitsu] do_scsi_cmd: finish
[fujitsu] set_window: finish
[fujitsu] object_position: start
[fujitsu] do_scsi_cmd: start
[fujitsu] do_scsi_cmd: finish
[fujitsu] wait_scanner: start
[fujitsu] do_scsi_cmd: start
[fujitsu] do_scsi_cmd: finish
[fujitsu] wait_scanner: finish
[fujitsu] object_position: finish
[fujitsu] start_scan: start
[fujitsu] do_scsi_cmd: start
[fujitsu] do_scsi_cmd: finish
[fujitsu] start_scan: finish
[fujitsu] sane_start: finish
[fujitsu] sane_get_parameters: start
[fujitsu] calculateDerivedValues: start
[fujitsu] xres=600, tlx=0, brx=10208, pw=10200, maxx=14592
[fujitsu] yres=600, tly=0, bry=13200, ph=13200, maxy=40800
[fujitsu] xres=600, tlx=0, brx=10208, pw=10200, maxx=14592
[fujitsu] yres=600, tly=0, bry=13200, ph=13200, maxy=40800
[fujitsu] calculateDerivedValues: finish
[fujitsu] sane_get_parameters: finish
[fujitsu] sane_read: start
[fujitsu] read_from_scanner: start
[fujitsu] do_scsi_cmd: start
[fujitsu] sense_handler: start
[fujitsu] Sense=0x5, ASC=0x26, ASCQ=00, EOM=1, ILI=0,
info=00000000
[fujitsu] Illegal request: invalid field in parm list
[fujitsu] Offending byte is 00
[fujitsu] do_scsi_cmd: return 'Invalid argument'
[fujitsu] read_from_scanner: error reading data block status
= 4
[fujitsu] read_from_scanner: finish
[fujitsu] sane_read: front returning 4
scanadf: sane_read: Invalid argument
Invalid argument
Scanned 0 pages
[fujitsu] sane_cancel: start
[fujitsu] do_cancel: start
[fujitsu] do_cancel: finish
[fujitsu] sane_cancel: finish
[fujitsu] sane_close: start
[fujitsu] do_cancel: start
[fujitsu] do_cancel: finish
[fujitsu] disconnect_fd: start
[fujitsu] disconnect_fd: finish
[fujitsu] sane_close: finish
[fujitsu] sane_exit: start
[fujitsu] disconnect_fd: start
[fujitsu] disconnect_fd: finish
[fujitsu] sane_exit: finish


-- 
sane-devel mailing list: sane-devellists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-d
evel
Unsubscribe: Send mail with subject "unsubscribe
your_password"
             to sane-devel-requestlists.alioth.debian.org

the sane 1.0.18-X comes from your linux distro, which i
assume to be
suse? you cannot get the -X part from us. you could attempt
to extract
it from their source package, but i dont think you need to,
because:

you have spectacular liming. thanks to some help from Juan
Pablo
Mendoza, i have just committed some code to sane cvs that
should make
your scanner work on both scsi and usb, in all color modes.
can you
please do a cvs checkout, verify that it contains fujitsu
backend v
1.0.47, and make some tests with it?

i am especially interested in the line-shifting problem, and
would
like to see a small sample, as well as a noisier debug log
if the
problem continues with latest backend.

allan

On 4/13/07, guus <guusmailme.ath.cx> wrote:
> Hello All,
>
> I have bought a fi-5650c scanner to replace a
fi-4120c.
> In addition, I have a new linux server.
>
> The new scanner is fine, it works ok when I connect it
instead to my old server.
> The new server is also fine: the old fi-4120c scanner
works ok on the new server.
>
> The problem is that the new fi-5650c scanner does not
operate when I connect it to the new server:
> scanner is recognized ok and the adf starts feeding but
stops halfway, before any real scanning:
>
> Here is an excerpt from the debug output (full text
below):
>
> [fujitsu] sense_handler: start
> [fujitsu] Sense=0x5, ASC=0x26, ASCQ=00, EOM=1, ILI=0,
info=00000000
> [fujitsu] Illegal request: invalid field in parm list
> [fujitsu] Offending byte is 00
> [fujitsu] do_scsi_cmd: return 'Invalid argument'
>
> This looks like a software bug, because the scanner
functions ok.
> I would report it as a bug, if I knew more about the
cause.
>
> My old server:
> - kernel:  2.6.8-2-686
> - cpu:     Intel Celeron
> - scsi:    LSI Logic / Symbios Logic 53c810 (rev 23)
> - libsane: 1.0.18-3
>
> My new server
> - kernel:  2.6.18-4-amd64
> - cpu:     Dual Core AMD Opteron
> - scsi:    Adaptec AHA-7850 (rev 03)
> - libsane: 1.0.18-6
>
> I am not sure where to look; my choices seem limited
and/or futile:
> - I have a k7 server that I could try, but what would
be the point?
> - I could try swopping scsi cards, but that is probably
futile
> - USB is not an option for this scanner, according to
libusb.
>
> Unfortunately, the reported scanner dialogues have
really changed from sane 1.0.18-3 to 1.0.18-6
>
> The most likely cause is some change in the sanei area,
because the fujitsu backend is not changed,
> according to a brief inspection of cvs.
>
> Most likely short term solution: fall back to 1.0.18-3
> But how can I retrieve the 1.0.18-3 sources from
cvs???
>
> Another minor problem of the fi-5650 under sane is that
each pixel row is shifted by one pixel
> relative to the previous row, making the output image
look slanted. My own software can compensate
> for this, so it is not a big problem. However, it may
be related (who knows).
>
> Thanks for any help.
> Guus.
>
>
> [sanei_debug] Setting debug level of fujitsu to 10.
> [fujitsu] sane_init: start
> [fujitsu] sane_init: fujitsu backend 1.0.33, from
sane-backends 1.0.18
> [fujitsu] sane_init: finish
> [fujitsu] sane_get_devices: start
> [fujitsu] find_scanners: start
> [fujitsu] attach_one: start
> [fujitsu] connect_fd: start
> [fujitsu] wait_scanner: start
> [fujitsu] do_scsi_cmd: start
> [fujitsu] do_scsi_cmd: finish
> [fujitsu] wait_scanner: finish
> [fujitsu] connect_fd: finish
> [fujitsu] init_inquire: start
> [fujitsu] do_scsi_cmd: start
> [fujitsu] do_scsi_cmd: finish
> [fujitsu] init_inquire: finish
> [fujitsu] init_vpd: start
> [fujitsu] do_scsi_cmd: start
> [fujitsu] do_scsi_cmd: finish
> [fujitsu] init_vpd: finish
> [fujitsu] init_model: start
> [fujitsu] init_model: finish
> [fujitsu] init_options: start
> [fujitsu] init_options: finish
> [fujitsu] disconnect_fd: start
> [fujitsu] disconnect_fd: finish
> [fujitsu] attach_one: finish
> [fujitsu] find_scanners: finish
> [fujitsu] sane_get_devices: finish
> [fujitsu] sane_open: start
> [fujitsu] connect_fd: start
> [fujitsu] wait_scanner: start
> [fujitsu] do_scsi_cmd: start
> [fujitsu] do_scsi_cmd: finish
> [fujitsu] wait_scanner: finish
> [fujitsu] connect_fd: finish
> [fujitsu] sane_open: finish
> scanadf: rounded value of br-x from 215.872 to 215.872
> scanadf: rounded value of br-y from 279.364 to 279.364
> [fujitsu] sane_start: start
> [fujitsu] scanner_control: start
> [fujitsu] do_scsi_cmd: start
> [fujitsu] do_scsi_cmd: finish
> [fujitsu] scanner_control: finish
> [fujitsu] calculateDerivedValues: start
> [fujitsu] xres=600, tlx=0, brx=10200, pw=10200,
maxx=14592
> [fujitsu] yres=600, tly=0, bry=13200, ph=13200,
maxy=40800
> [fujitsu] xres=600, tlx=0, brx=10208, pw=10200,
maxx=14592
> [fujitsu] yres=600, tly=0, bry=13200, ph=13200,
maxy=40800
> [fujitsu] calculateDerivedValues: finish
> [fujitsu] setup_buffers: start
> [fujitsu] setup_buffers: finish
> [fujitsu] set_window: start
> [fujitsu] do_scsi_cmd: start
> [fujitsu] do_scsi_cmd: finish
> [fujitsu] set_window: finish
> [fujitsu] object_position: start
> [fujitsu] do_scsi_cmd: start
> [fujitsu] do_scsi_cmd: finish
> [fujitsu] wait_scanner: start
> [fujitsu] do_scsi_cmd: start
> [fujitsu] do_scsi_cmd: finish
> [fujitsu] wait_scanner: finish
> [fujitsu] object_position: finish
> [fujitsu] start_scan: start
> [fujitsu] do_scsi_cmd: start
> [fujitsu] do_scsi_cmd: finish
> [fujitsu] start_scan: finish
> [fujitsu] sane_start: finish
> [fujitsu] sane_get_parameters: start
> [fujitsu] calculateDerivedValues: start
> [fujitsu] xres=600, tlx=0, brx=10208, pw=10200,
maxx=14592
> [fujitsu] yres=600, tly=0, bry=13200, ph=13200,
maxy=40800
> [fujitsu] xres=600, tlx=0, brx=10208, pw=10200,
maxx=14592
> [fujitsu] yres=600, tly=0, bry=13200, ph=13200,
maxy=40800
> [fujitsu] calculateDerivedValues: finish
> [fujitsu] sane_get_parameters: finish
> [fujitsu] sane_read: start
> [fujitsu] read_from_scanner: start
> [fujitsu] do_scsi_cmd: start
> [fujitsu] sense_handler: start
> [fujitsu] Sense=0x5, ASC=0x26, ASCQ=00, EOM=1, ILI=0,
info=00000000
> [fujitsu] Illegal request: invalid field in parm list
> [fujitsu] Offending byte is 00
> [fujitsu] do_scsi_cmd: return 'Invalid argument'
> [fujitsu] read_from_scanner: error reading data block
status = 4
> [fujitsu] read_from_scanner: finish
> [fujitsu] sane_read: front returning 4
> scanadf: sane_read: Invalid argument
> Invalid argument
> Scanned 0 pages
> [fujitsu] sane_cancel: start
> [fujitsu] do_cancel: start
> [fujitsu] do_cancel: finish
> [fujitsu] sane_cancel: finish
> [fujitsu] sane_close: start
> [fujitsu] do_cancel: start
> [fujitsu] do_cancel: finish
> [fujitsu] disconnect_fd: start
> [fujitsu] disconnect_fd: finish
> [fujitsu] sane_close: finish
> [fujitsu] sane_exit: start
> [fujitsu] disconnect_fd: start
> [fujitsu] disconnect_fd: finish
> [fujitsu] sane_exit: finish
>
>
> --
> sane-devel mailing list: sane-devellists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-d
evel
> Unsubscribe: Send mail with subject "unsubscribe
your_password"
>              to sane-devel-requestlists.alioth.debian.org
>


-- 
"The truth is an offense, but not a sin"

-- 
sane-devel mailing list: sane-devellists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-d
evel
Unsubscribe: Send mail with subject "unsubscribe
your_password"
             to sane-devel-requestlists.alioth.debian.org

try running lsusb, and dmesg. see if anything shows up. if
not, do you
have a kernel module installed for your usb controller
(uhci_hcd,
ohci_hcd, ehci_hcd)? you will also need a recent libusb.

allan

On 4/14/07, guus <guusmailme.ath.cx> wrote:
> Hi Allan,
>
> Thank you and Juan Pablo Mendoza for your work. I have
obtained the
> latest cvs snapshot and the scanner works fine on scsi
now: color,
> double sided, everything that I tried is ok.
>
> The erroneous pixel shift is also gone. Kudos!
>
> I would like to confirm the USB operation, but I am not
familiar with
> USB. You can find some of my futile attempts below.
SCSI is removed from
> fujitsu.conf, some USB settings added. Did I miss
anything?
>
> The machine will be with me for a few more days, so let
me know if there
> is anything I can do to help test.
>
> Greets,
> Guus.
>
>
>
> doo:/tmp# lsusb
> Bus 002 Device 001: ID 0000:0000
> Bus 001 Device 005: ID 04c5:10ad Fujitsu, Ltd
> Bus 001 Device 001: ID 0000:0000
>
> doo:/tmp# tail -3 /etc/sane.d/fujitsu.conf
>
> #fi-5650C
> usb 0x4c5 0x10ad
>
> doo:/tmp# sane-find-scanner
>
>   # sane-find-scanner will now attempt to detect your
scanner. If the
>   # result is different from what you expected, first
make sure your
>   # scanner is powered up and properly connected to
your computer.
>
>   # No SCSI scanners found. If you expected something
different, make
> sure that
>   # you have loaded a kernel SCSI driver for your SCSI
adapter.
>
> found USB scanner (vendor=0x04c5, product=0x10ad) at
libusb:001:005
>   # Your USB scanner was (probably) detected. It may or
may not be
> supported by
>   # SANE. Try scanimage -L and read the backend's
manpage.
>
>   # Not checking for parallel port scanners.
>
>   # Most Scanners connected to the parallel port or
other proprietary ports
>   # can't be detected by this program.
>
> doo:/tmp# scanadf
> [sanei_debug] Setting debug level of fujitsu to 10.
> [fujitsu] sane_init: start
> [fujitsu] sane_init: fujitsu backend 1.0.47, from
sane-backends 1.0.18-cvs
> [fujitsu] sane_init: finish
> [fujitsu] sane_get_devices: start
> [fujitsu] find_scanners: start
> [fujitsu] find_scanners: finish
> [fujitsu] sane_get_devices: finish
> scanadf: no SANE devices found
> [fujitsu] sane_exit: start
> [fujitsu] sane_exit: finish
>
> doo:/tmp#
>
> m. allan noah wrote:
>
> > the sane 1.0.18-X comes from your linux distro,
which i assume to be
> > suse? you cannot get the -X part from us. you
could attempt to extract
> > it from their source package, but i dont think you
need to, because:
> >
> > you have spectacular liming. thanks to some help
from Juan Pablo
> > Mendoza, i have just committed some code to sane
cvs that should make
> > your scanner work on both scsi and usb, in all
color modes. can you
> > please do a cvs checkout, verify that it contains
fujitsu backend v
> > 1.0.47, and make some tests with it?
> >
> > i am especially interested in the line-shifting
problem, and would
> > like to see a small sample, as well as a noisier
debug log if the
> > problem continues with latest backend.
> >
> > allan
> >
> > On 4/13/07, guus <guusmailme.ath.cx> wrote:
> >
> >> Hello All,
> >>
> >> I have bought a fi-5650c scanner to replace a
fi-4120c.
> >> In addition, I have a new linux server.
> >>
> >> The new scanner is fine, it works ok when I
connect it instead to my
> >> old server.
> >> The new server is also fine: the old fi-4120c
scanner works ok on the
> >> new server.
> >>
> >> The problem is that the new fi-5650c scanner
does not operate when I
> >> connect it to the new server:
> >> scanner is recognized ok and the adf starts
feeding but stops
> >> halfway, before any real scanning:
> >>
> >> Here is an excerpt from the debug output (full
text below):
> >>
> >> [fujitsu] sense_handler: start
> >> [fujitsu] Sense=0x5, ASC=0x26, ASCQ=00, EOM=1,
ILI=0, info=00000000
> >> [fujitsu] Illegal request: invalid field in
parm list
> >> [fujitsu] Offending byte is 00
> >> [fujitsu] do_scsi_cmd: return 'Invalid
argument'
> >>
> >> This looks like a software bug, because the
scanner functions ok.
> >> I would report it as a bug, if I knew more
about the cause.
> >>
> >> My old server:
> >> - kernel:  2.6.8-2-686
> >> - cpu:     Intel Celeron
> >> - scsi:    LSI Logic / Symbios Logic 53c810
(rev 23)
> >> - libsane: 1.0.18-3
> >>
> >> My new server
> >> - kernel:  2.6.18-4-amd64
> >> - cpu:     Dual Core AMD Opteron
> >> - scsi:    Adaptec AHA-7850 (rev 03)
> >> - libsane: 1.0.18-6
> >>
> >> I am not sure where to look; my choices seem
limited and/or futile:
> >> - I have a k7 server that I could try, but
what would be the point?
> >> - I could try swopping scsi cards, but that is
probably futile
> >> - USB is not an option for this scanner,
according to libusb.
> >>
> >> Unfortunately, the reported scanner dialogues
have really changed
> >> from sane 1.0.18-3 to 1.0.18-6
> >>
> >> The most likely cause is some change in the
sanei area, because the
> >> fujitsu backend is not changed,
> >> according to a brief inspection of cvs.
> >>
> >> Most likely short term solution: fall back to
1.0.18-3
> >> But how can I retrieve the 1.0.18-3 sources
from cvs???
> >>
> >> Another minor problem of the fi-5650 under
sane is that each pixel
> >> row is shifted by one pixel
> >> relative to the previous row, making the
output image look slanted.
> >> My own software can compensate
> >> for this, so it is not a big problem. However,
it may be related (who
> >> knows).
> >>
> >> Thanks for any help.
> >> Guus.
> >>
> >>
> >> [sanei_debug] Setting debug level of fujitsu
to 10.
> >> [fujitsu] sane_init: start
> >> [fujitsu] sane_init: fujitsu backend 1.0.33,
from sane-backends 1.0.18
> >> [fujitsu] sane_init: finish
> >> [fujitsu] sane_get_devices: start
> >> [fujitsu] find_scanners: start
> >> [fujitsu] attach_one: start
> >> [fujitsu] connect_fd: start
> >> [fujitsu] wait_scanner: start
> >> [fujitsu] do_scsi_cmd: start
> >> [fujitsu] do_scsi_cmd: finish
> >> [fujitsu] wait_scanner: finish
> >> [fujitsu] connect_fd: finish
> >> [fujitsu] init_inquire: start
> >> [fujitsu] do_scsi_cmd: start
> >> [fujitsu] do_scsi_cmd: finish
> >> [fujitsu] init_inquire: finish
> >> [fujitsu] init_vpd: start
> >> [fujitsu] do_scsi_cmd: start
> >> [fujitsu] do_scsi_cmd: finish
> >> [fujitsu] init_vpd: finish
> >> [fujitsu] init_model: start
> >> [fujitsu] init_model: finish
> >> [fujitsu] init_options: start
> >> [fujitsu] init_options: finish
> >> [fujitsu] disconnect_fd: start
> >> [fujitsu] disconnect_fd: finish
> >> [fujitsu] attach_one: finish
> >> [fujitsu] find_scanners: finish
> >> [fujitsu] sane_get_devices: finish
> >> [fujitsu] sane_open: start
> >> [fujitsu] connect_fd: start
> >> [fujitsu] wait_scanner: start
> >> [fujitsu] do_scsi_cmd: start
> >> [fujitsu] do_scsi_cmd: finish
> >> [fujitsu] wait_scanner: finish
> >> [fujitsu] connect_fd: finish
> >> [fujitsu] sane_open: finish
> >> scanadf: rounded value of br-x from 215.872 to
215.872
> >> scanadf: rounded value of br-y from 279.364 to
279.364
> >> [fujitsu] sane_start: start
> >> [fujitsu] scanner_control: start
> >> [fujitsu] do_scsi_cmd: start
> >> [fujitsu] do_scsi_cmd: finish
> >> [fujitsu] scanner_control: finish
> >> [fujitsu] calculateDerivedValues: start
> >> [fujitsu] xres=600, tlx=0, brx=10200,
pw=10200, maxx=14592
> >> [fujitsu] yres=600, tly=0, bry=13200,
ph=13200, maxy=40800
> >> [fujitsu] xres=600, tlx=0, brx=10208,
pw=10200, maxx=14592
> >> [fujitsu] yres=600, tly=0, bry=13200,
ph=13200, maxy=40800
> >> [fujitsu] calculateDerivedValues: finish
> >> [fujitsu] setup_buffers: start
> >> [fujitsu] setup_buffers: finish
> >> [fujitsu] set_window: start
> >> [fujitsu] do_scsi_cmd: start
> >> [fujitsu] do_scsi_cmd: finish
> >> [fujitsu] set_window: finish
> >> [fujitsu] object_position: start
> >> [fujitsu] do_scsi_cmd: start
> >> [fujitsu] do_scsi_cmd: finish
> >> [fujitsu] wait_scanner: start
> >> [fujitsu] do_scsi_cmd: start
> >> [fujitsu] do_scsi_cmd: finish
> >> [fujitsu] wait_scanner: finish
> >> [fujitsu] object_position: finish
> >> [fujitsu] start_scan: start
> >> [fujitsu] do_scsi_cmd: start
> >> [fujitsu] do_scsi_cmd: finish
> >> [fujitsu] start_scan: finish
> >> [fujitsu] sane_start: finish
> >> [fujitsu] sane_get_parameters: start
> >> [fujitsu] calculateDerivedValues: start
> >> [fujitsu] xres=600, tlx=0, brx=10208,
pw=10200, maxx=14592
> >> [fujitsu] yres=600, tly=0, bry=13200,
ph=13200, maxy=40800
> >> [fujitsu] xres=600, tlx=0, brx=10208,
pw=10200, maxx=14592
> >> [fujitsu] yres=600, tly=0, bry=13200,
ph=13200, maxy=40800
> >> [fujitsu] calculateDerivedValues: finish
> >> [fujitsu] sane_get_parameters: finish
> >> [fujitsu] sane_read: start
> >> [fujitsu] read_from_scanner: start
> >> [fujitsu] do_scsi_cmd: start
> >> [fujitsu] sense_handler: start
> >> [fujitsu] Sense=0x5, ASC=0x26, ASCQ=00, EOM=1,
ILI=0, info=00000000
> >> [fujitsu] Illegal request: invalid field in
parm list
> >> [fujitsu] Offending byte is 00
> >> [fujitsu] do_scsi_cmd: return 'Invalid
argument'
> >> [fujitsu] read_from_scanner: error reading
data block status = 4
> >> [fujitsu] read_from_scanner: finish
> >> [fujitsu] sane_read: front returning 4
> >> scanadf: sane_read: Invalid argument
> >> Invalid argument
> >> Scanned 0 pages
> >> [fujitsu] sane_cancel: start
> >> [fujitsu] do_cancel: start
> >> [fujitsu] do_cancel: finish
> >> [fujitsu] sane_cancel: finish
> >> [fujitsu] sane_close: start
> >> [fujitsu] do_cancel: start
> >> [fujitsu] do_cancel: finish
> >> [fujitsu] disconnect_fd: start
> >> [fujitsu] disconnect_fd: finish
> >> [fujitsu] sane_close: finish
> >> [fujitsu] sane_exit: start
> >> [fujitsu] disconnect_fd: start
> >> [fujitsu] disconnect_fd: finish
> >> [fujitsu] sane_exit: finish
> >>
> >>
> >> --
> >> sane-devel mailing list: sane-devellists.alioth.debian.org
> >> http://lists.alioth.debian.org/mailman/listinfo/sane-d
evel
> >> Unsubscribe: Send mail with subject
"unsubscribe your_password"
> >>              to sane-devel-requestlists.alioth.debian.org
> >>
> >
> >
>
>


-- 
"The truth is an offense, but not a sin"

-- 
sane-devel mailing list: sane-devellists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-d
evel
Unsubscribe: Send mail with subject "unsubscribe
your_password"
             to sane-devel-requestlists.alioth.debian.org

my goodness, i should have read your email more closely.

two quick guesses- 1. are you able to scan as root? if so,
it is some
sort of permissions issue.

if not, then perhaps libusb or sanei_usb is borked or your
system.

try (all on one line):

SANE_DEBUG_FUJITSU=25 SANE_DEBUG_SANEI_USB=255 scanimage -d
fujitsu
--help 2> 5650usb.log

and then lets have a look at that log.

allan

On 4/14/07, m. allan noah <kitno455gmail.com> wrote:
> try running lsusb, and dmesg. see if anything shows up.
if not, do you
> have a kernel module installed for your usb controller
(uhci_hcd,
> ohci_hcd, ehci_hcd)? you will also need a recent
libusb.
>
> allan
>
> On 4/14/07, guus <guusmailme.ath.cx> wrote:
> > Hi Allan,
> >
> > Thank you and Juan Pablo Mendoza for your work. I
have obtained the
> > latest cvs snapshot and the scanner works fine on
scsi now: color,
> > double sided, everything that I tried is ok.
> >
> > The erroneous pixel shift is also gone. Kudos!
> >
> > I would like to confirm the USB operation, but I
am not familiar with
> > USB. You can find some of my futile attempts
below. SCSI is removed from
> > fujitsu.conf, some USB settings added. Did I miss
anything?
> >
> > The machine will be with me for a few more days,
so let me know if there
> > is anything I can do to help test.
> >
> > Greets,
> > Guus.
> >
> >
> >
> > doo:/tmp# lsusb
> > Bus 002 Device 001: ID 0000:0000
> > Bus 001 Device 005: ID 04c5:10ad Fujitsu, Ltd
> > Bus 001 Device 001: ID 0000:0000
> >
> > doo:/tmp# tail -3 /etc/sane.d/fujitsu.conf
> >
> > #fi-5650C
> > usb 0x4c5 0x10ad
> >
> > doo:/tmp# sane-find-scanner
> >
> >   # sane-find-scanner will now attempt to detect
your scanner. If the
> >   # result is different from what you expected,
first make sure your
> >   # scanner is powered up and properly connected
to your computer.
> >
> >   # No SCSI scanners found. If you expected
something different, make
> > sure that
> >   # you have loaded a kernel SCSI driver for your
SCSI adapter.
> >
> > found USB scanner (vendor=0x04c5, product=0x10ad)
at libusb:001:005
> >   # Your USB scanner was (probably) detected. It
may or may not be
> > supported by
> >   # SANE. Try scanimage -L and read the backend's
manpage.
> >
> >   # Not checking for parallel port scanners.
> >
> >   # Most Scanners connected to the parallel port
or other proprietary ports
> >   # can't be detected by this program.
> >
> > doo:/tmp# scanadf
> > [sanei_debug] Setting debug level of fujitsu to
10.
> > [fujitsu] sane_init: start
> > [fujitsu] sane_init: fujitsu backend 1.0.47, from
sane-backends 1.0.18-cvs
> > [fujitsu] sane_init: finish
> > [fujitsu] sane_get_devices: start
> > [fujitsu] find_scanners: start
> > [fujitsu] find_scanners: finish
> > [fujitsu] sane_get_devices: finish
> > scanadf: no SANE devices found
> > [fujitsu] sane_exit: start
> > [fujitsu] sane_exit: finish
> >
> > doo:/tmp#
> >
> > m. allan noah wrote:
> >
> > > the sane 1.0.18-X comes from your linux
distro, which i assume to be
> > > suse? you cannot get the -X part from us. you
could attempt to extract
> > > it from their source package, but i dont
think you need to, because:
> > >
> > > you have spectacular liming. thanks to some
help from Juan Pablo
> > > Mendoza, i have just committed some code to
sane cvs that should make
> > > your scanner work on both scsi and usb, in
all color modes. can you
> > > please do a cvs checkout, verify that it
contains fujitsu backend v
> > > 1.0.47, and make some tests with it?
> > >
> > > i am especially interested in the
line-shifting problem, and would
> > > like to see a small sample, as well as a
noisier debug log if the
> > > problem continues with latest backend.
> > >
> > > allan
> > >
> > > On 4/13/07, guus <guusmailme.ath.cx> wrote:
> > >
> > >> Hello All,
> > >>
> > >> I have bought a fi-5650c scanner to
replace a fi-4120c.
> > >> In addition, I have a new linux server.
> > >>
> > >> The new scanner is fine, it works ok when
I connect it instead to my
> > >> old server.
> > >> The new server is also fine: the old
fi-4120c scanner works ok on the
> > >> new server.
> > >>
> > >> The problem is that the new fi-5650c
scanner does not operate when I
> > >> connect it to the new server:
> > >> scanner is recognized ok and the adf
starts feeding but stops
> > >> halfway, before any real scanning:
> > >>
> > >> Here is an excerpt from the debug output
(full text below):
> > >>
> > >> [fujitsu] sense_handler: start
> > >> [fujitsu] Sense=0x5, ASC=0x26, ASCQ=00,
EOM=1, ILI=0, info=00000000
> > >> [fujitsu] Illegal request: invalid field
in parm list
> > >> [fujitsu] Offending byte is 00
> > >> [fujitsu] do_scsi_cmd: return 'Invalid
argument'
> > >>
> > >> This looks like a software bug, because
the scanner functions ok.
> > >> I would report it as a bug, if I knew
more about the cause.
> > >>
> > >> My old server:
> > >> - kernel:  2.6.8-2-686
> > >> - cpu:     Intel Celeron
> > >> - scsi:    LSI Logic / Symbios Logic
53c810 (rev 23)
> > >> - libsane: 1.0.18-3
> > >>
> > >> My new server
> > >> - kernel:  2.6.18-4-amd64
> > >> - cpu:     Dual Core AMD Opteron
> > >> - scsi:    Adaptec AHA-7850 (rev 03)
> > >> - libsane: 1.0.18-6
> > >>
> > >> I am not sure where to look; my choices
seem limited and/or futile:
> > >> - I have a k7 server that I could try,
but what would be the point?
> > >> - I could try swopping scsi cards, but
that is probably futile
> > >> - USB is not an option for this scanner,
according to libusb.
> > >>
> > >> Unfortunately, the reported scanner
dialogues have really changed
> > >> from sane 1.0.18-3 to 1.0.18-6
> > >>
> > >> The most likely cause is some change in
the sanei area, because the
> > >> fujitsu backend is not changed,
> > >> according to a brief inspection of cvs.
> > >>
> > >> Most likely short term solution: fall
back to 1.0.18-3
> > >> But how can I retrieve the 1.0.18-3
sources from cvs???
> > >>
> > >> Another minor problem of the fi-5650
under sane is that each pixel
> > >> row is shifted by one pixel
> > >> relative to the previous row, making the
output image look slanted.
> > >> My own software can compensate
> > >> for this, so it is not a big problem.
However, it may be related (who
> > >> knows).
> > >>
> > >> Thanks for any help.
> > >> Guus.
> > >>
> > >>
> > >> [sanei_debug] Setting debug level of
fujitsu to 10.
> > >> [fujitsu] sane_init: start
> > >> [fujitsu] sane_init: fujitsu backend
1.0.33, from sane-backends 1.0.18
> > >> [fujitsu] sane_init: finish
> > >> [fujitsu] sane_get_devices: start
> > >> [fujitsu] find_scanners: start
> > >> [fujitsu] attach_one: start
> > >> [fujitsu] connect_fd: start
> > >> [fujitsu] wait_scanner: start
> > >> [fujitsu] do_scsi_cmd: start
> > >> [fujitsu] do_scsi_cmd: finish
> > >> [fujitsu] wait_scanner: finish
> > >> [fujitsu] connect_fd: finish
> > >> [fujitsu] init_inquire: start
> > >> [fujitsu] do_scsi_cmd: start
> > >> [fujitsu] do_scsi_cmd: finish
> > >> [fujitsu] init_inquire: finish
> > >> [fujitsu] init_vpd: start
> > >> [fujitsu] do_scsi_cmd: start
> > >> [fujitsu] do_scsi_cmd: finish
> > >> [fujitsu] init_vpd: finish
> > >> [fujitsu] init_model: start
> > >> [fujitsu] init_model: finish
> > >> [fujitsu] init_options: start
> > >> [fujitsu] init_options: finish
> > >> [fujitsu] disconnect_fd: start
> > >> [fujitsu] disconnect_fd: finish
> > >> [fujitsu] attach_one: finish
> > >> [fujitsu] find_scanners: finish
> > >> [fujitsu] sane_get_devices: finish
> > >> [fujitsu] sane_open: start
> > >> [fujitsu] connect_fd: start
> > >> [fujitsu] wait_scanner: start
> > >> [fujitsu] do_scsi_cmd: start
> > >> [fujitsu] do_scsi_cmd: finish
> > >> [fujitsu] wait_scanner: finish
> > >> [fujitsu] connect_fd: finish
> > >> [fujitsu] sane_open: finish
> > >> scanadf: rounded value of br-x from
215.872 to 215.872
> > >> scanadf: rounded value of br-y from
279.364 to 279.364
> > >> [fujitsu] sane_start: start
> > >> [fujitsu] scanner_control: start
> > >> [fujitsu] do_scsi_cmd: start
> > >> [fujitsu] do_scsi_cmd: finish
> > >> [fujitsu] scanner_control: finish
> > >> [fujitsu] calculateDerivedValues: start
> > >> [fujitsu] xres=600, tlx=0, brx=10200,
pw=10200, maxx=14592
> > >> [fujitsu] yres=600, tly=0, bry=13200,
ph=13200, maxy=40800
> > >> [fujitsu] xres=600, tlx=0, brx=10208,
pw=10200, maxx=14592
> > >> [fujitsu] yres=600, tly=0, bry=13200,
ph=13200, maxy=40800
> > >> [fujitsu] calculateDerivedValues: finish
> > >> [fujitsu] setup_buffers: start
> > >> [fujitsu] setup_buffers: finish
> > >> [fujitsu] set_window: start
> > >> [fujitsu] do_scsi_cmd: start
> > >> [fujitsu] do_scsi_cmd: finish
> > >> [fujitsu] set_window: finish
> > >> [fujitsu] object_position: start
> > >> [fujitsu] do_scsi_cmd: start
> > >> [fujitsu] do_scsi_cmd: finish
> > >> [fujitsu] wait_scanner: start
> > >> [fujitsu] do_scsi_cmd: start
> > >> [fujitsu] do_scsi_cmd: finish
> > >> [fujitsu] wait_scanner: finish
> > >> [fujitsu] object_position: finish
> > >> [fujitsu] start_scan: start
> > >> [fujitsu] do_scsi_cmd: start
> > >> [fujitsu] do_scsi_cmd: finish
> > >> [fujitsu] start_scan: finish
> > >> [fujitsu] sane_start: finish
> > >> [fujitsu] sane_get_parameters: start
> > >> [fujitsu] calculateDerivedValues: start
> > >> [fujitsu] xres=600, tlx=0, brx=10208,
pw=10200, maxx=14592
> > >> [fujitsu] yres=600, tly=0, bry=13200,
ph=13200, maxy=40800
> > >> [fujitsu] xres=600, tlx=0, brx=10208,
pw=10200, maxx=14592
> > >> [fujitsu] yres=600, tly=0, bry=13200,
ph=13200, maxy=40800
> > >> [fujitsu] calculateDerivedValues: finish
> > >> [fujitsu] sane_get_parameters: finish
> > >> [fujitsu] sane_read: start
> > >> [fujitsu] read_from_scanner: start
> > >> [fujitsu] do_scsi_cmd: start
> > >> [fujitsu] sense_handler: start
> > >> [fujitsu] Sense=0x5, ASC=0x26, ASCQ=00,
EOM=1, ILI=0, info=00000000
> > >> [fujitsu] Illegal request: invalid field
in parm list
> > >> [fujitsu] Offending byte is 00
> > >> [fujitsu] do_scsi_cmd: return 'Invalid
argument'
> > >> [fujitsu] read_from_scanner: error
reading data block status = 4
> > >> [fujitsu] read_from_scanner: finish
> > >> [fujitsu] sane_read: front returning 4
> > >> scanadf: sane_read: Invalid argument
> > >> Invalid argument
> > >> Scanned 0 pages
> > >> [fujitsu] sane_cancel: start
> > >> [fujitsu] do_cancel: start
> > >> [fujitsu] do_cancel: finish
> > >> [fujitsu] sane_cancel: finish
> > >> [fujitsu] sane_close: start
> > >> [fujitsu] do_cancel: start
> > >> [fujitsu] do_cancel: finish
> > >> [fujitsu] disconnect_fd: start
> > >> [fujitsu] disconnect_fd: finish
> > >> [fujitsu] sane_close: finish
> > >> [fujitsu] sane_exit: start
> > >> [fujitsu] disconnect_fd: start
> > >> [fujitsu] disconnect_fd: finish
> > >> [fujitsu] sane_exit: finish
> > >>
> > >>
> > >> --
> > >> sane-devel mailing list: sane-devellists.alioth.debian.org
> > >> http://lists.alioth.debian.org/mailman/listinfo/sane-d
evel
> > >> Unsubscribe: Send mail with subject
"unsubscribe your_password"
> > >>              to sane-devel-requestlists.alioth.debian.org
> > >>
> > >
> > >
> >
> >
>
>
> --
> "The truth is an offense, but not a sin"
>


-- 
"The truth is an offense, but not a sin"

-- 
sane-devel mailing list: sane-devellists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-d
evel
Unsubscribe: Send mail with subject "unsubscribe
your_password"
             to sane-devel-requestlists.alioth.debian.org

Hi Allan,

m. allan noah wrote:

> my goodness, i should have read your email more
closely.

Or I could have made myself more clear 

>
> two quick guesses- 1. are you able to scan as root? if
so, it is some
> sort of permissions issue.

I run as root, at least for testing.

>
> if not, then perhaps libusb or sanei_usb is borked or
your system.
>
> try (all on one line):
>
> SANE_DEBUG_FUJITSU=25 SANE_DEBUG_SANEI_USB=255
scanimage -d fujitsu
> --help 2> 5650usb.log
>
> and then lets have a look at that log.


Considering that fujitsu's own Windows driver does not find
the scanner 
hot-plugged, I did the unthinkable: I rebooted with the usb
connected. 
If this is a required step, it could be included in the help
texts and 
man pages, saving lots of time.

Anyway, the scanner is now seen

    doo:~# lsusb
    Bus 002 Device 002: ID 04c5:10ad Fujitsu, Ltd
    Bus 002 Device 001: ID 0000:0000 
    Bus 001 Device 001: ID 0000:0000 

    doo:~# sane-find-scanner -q
    found USB scanner (vendor=0x04c5, product=0x10ad) at
libusb:002:002


But it is not found by scanadf

    doo:~# scanadf
    scanadf: no SANE devices found


But ok, for your test: it sort of finds the scanner . . .
but fails to 
recognize it.
The output is below. My guess is that you now know the cause
of the problem.

Cheer,
Guus.

[sanei_debug] Setting debug level of fujitsu to 25.
[fujitsu] sane_init: start
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: SANE is built without support
for libusb
[sanei_usb] sanei_usb_init: found 0 devices
[fujitsu] sane_init: fujitsu backend 1.0.47, from
sane-backends 1.0.18-cvs
[fujitsu] sane_init: finish
[fujitsu] sane_open: start
[fujitsu] sane_open: no scanners currently attached,
attaching
[fujitsu] find_scanners: start
[fujitsu] find_scanners: reading config file fujitsu.conf
[fujitsu] find_scanners: setting "buffer-size" to
65536
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1041'
[sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x1041
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1042'
[sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x1042
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10ad'
[sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x10ad
[fujitsu] find_scanners: found 0 scanner(s)
[fujitsu] find_scanners: finish
[fujitsu] sane_open: no device requested, using default
[fujitsu] sane_open: no device found
scanimage: open of device fujitsu failed: Invalid argument
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_set_debug: Setting debugging level to 255 (on)
usb_os_find_busses: Found 002
usb_os_find_busses: Found 001
usb_os_find_devices: Found 002 on 002
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for
device
usb_os_find_devices: Found 001 on 001
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x1606,
product=0x0010
[sanei_usb] sanei_usb_find_devices: vendor=0x1606,
product=0x0030
[sanei_usb] sanei_usb_find_devices: vendor=0x1606,
product=0x0130
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x1606,
product=0x0230
[sanei_usb] sanei_usb_open: trying to open device
`/dev/usbscanner'
[sanei_usb] sanei_usb_open: can't find device
`/dev/usbscanner' in list
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0001
[sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2004
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x1a20
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x1a26
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x2022
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x1a2a
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x2040
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x2060
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x207e
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x20be
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x20c0
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x20b0
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x20de
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x20f8
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x20fc
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x20fe
[sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x2137
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x0002
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x0001
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x2061
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x2093
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x2091
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x2095
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x2097
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x208d
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x20ff
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x208f
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x20fd
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0114
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x011f
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0121
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0122
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x080c
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x30d4
[sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x30cf
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x40b3
[sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x40ca
[sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x40ff
[sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x40b8
[sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x40cb
[sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x40dd
[sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x40ff
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0010
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0011
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0015
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0013
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0013
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0011
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0010
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0014
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0015
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0014
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0016
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0007
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x000f
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x000f
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0005
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0014
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0012
[sanei_usb] sanei_usb_find_devices: vendor=0x0400,
product=0x1000
[sanei_usb] sanei_usb_find_devices: vendor=0x0400,
product=0x1001
[sanei_usb] sanei_usb_find_devices: vendor=0x0400,
product=0x1001
[sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2007
[sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2008
[sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2009
[sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2013
[sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2015
[sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2016
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0505
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0605
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x010f
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x011d
[sanei_usb] sanei_usb_find_devices: vendor=0x1606,
product=0x0050
[sanei_usb] sanei_usb_find_devices: vendor=0x1606,
product=0x0060
[sanei_usb] sanei_usb_find_devices: vendor=0x1606,
product=0x0160
[sanei_usb] sanei_usb_find_devices: vendor=0x049f,
product=0x001a
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x2206
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x2207
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x2208
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x220d
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x220e
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x2220
[sanei_usb] sanei_usb_find_devices: vendor=0x0a82,
product=0x6620
[sanei_usb] sanei_usb_open: trying to open device `auto'
[sanei_usb] sanei_usb_open: can't find device `auto' in
list
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x1709
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x170a
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x170b
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x170c
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0xffff
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x170d
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0xffff
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x1713
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x1706
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x1707
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x1708
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x2630
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x262f
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0205
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0405
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0305
[sanei_usb] sanei_usb_find_devices: vendor=0x047b,
product=0x1002
[sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x0100
[sanei_usb] sanei_usb_find_devices: vendor=0x047b,
product=0x1000
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0409
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0006
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0001
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0008
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0002
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0873
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0010
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x043d,
product=0x007c
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x1005
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x1105
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0105
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x2205
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x2005
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0101
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0401
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0201
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0601
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4002
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x021e
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0218
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0219
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x021a
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x021d
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x021f
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x021c
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x021b
[sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0210
[sanei_usb] sanei_usb_find_devices: vendor=0x043d,
product=0x002d
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0401
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0400
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0402
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0403
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0412
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0413
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0422
[sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2011
[sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x201b
[sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2017
[sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x201a
[sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x201d
[sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x201f
[sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2014
[sanei_usb] sanei_usb_find_devices: vendor=0x04a7,
product=0x0444
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x0461,
product=0x0377
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0901
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x2213
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x221c
[fujitsu] sane_get_devices: start
[fujitsu] find_scanners: start
[fujitsu] find_scanners: reading config file fujitsu.conf
[fujitsu] find_scanners: setting "buffer-size" to
65536
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1041'
[sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x1041
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1042'
[sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x1042
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10ad'
[sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x10ad
[fujitsu] find_scanners: found 0 scanner(s)
[fujitsu] find_scanners: finish
[fujitsu] sane_get_devices: finish
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0101
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0103
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x010c
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0104
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x010b
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0106
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0109
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x010a
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0107
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x010e
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0110
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0112
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0116
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x011b
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x011c
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x011e
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0126
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0128
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0129
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x012a
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0801
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0802
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0805
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0806
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0807
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0808
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x080d
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x080e
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x080f
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0810
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0811
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0814
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0815
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0819
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0820
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0000
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x04b0,
product=0x4000
[sanei_usb] sanei_usb_find_devices: vendor=0x04b0,
product=0x4001
[sanei_usb] sanei_usb_find_devices: vendor=0x04b0,
product=0x4002
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x2204
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4003
[sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4006
[sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4005
[sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4007
[sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4009
[sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4004
[sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4010
[sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4011
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such
file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /dev/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad) 
interface 0  at libusb:002:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like
a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a27
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a3c
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a33
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a24
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a25
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a3a
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a23
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a2a
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a2a
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a19
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a41
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a16
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a13
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a18
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a66
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a40
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a68
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a61
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a45
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0701
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0701
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0801
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0b01
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x026a
[sanei_usb] sanei_usb_find_devices: vendor=0x0686,
product=0x4004
[sanei_usb] sanei_usb_find_devices: vendor=0x0686,
product=0x400d
[sanei_usb] sanei_usb_find_devices: vendor=0x0686,
product=0x400e
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a15
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a16
[sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x1029
[sanei_usb] sanei_usb_find_devices: vendor=0x040a,
product=0x6001
[sanei_usb] sanei_usb_find_devices: vendor=0x040a,
product=0x6002
[sanei_usb] sanei_usb_find_devices: vendor=0x040a,
product=0x6003
[sanei_usb] sanei_usb_find_devices: vendor=0x040a,
product=0x6004
[sanei_usb] sanei_usb_find_devices: vendor=0x040a,
product=0x6005
[sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0268
[sanei_usb] sanei_usb_find_devices: vendor=0x04a7,
product=0x0449
[sanei_usb] sanei_usb_find_devices: vendor=0x04a7,
product=0x044c
[sanei_usb] sanei_usb_find_devices: vendor=0x04a7,
product=0x0475
[fujitsu] sane_exit: start
[fujitsu] sane_exit: finish
~









-- 
sane-devel mailing list: sane-devellists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-d
evel
Unsubscribe: Send mail with subject "unsubscribe
your_password"
             to sane-devel-requestlists.alioth.debian.org

that is really odd- first it says no libusb support, then it
later it
does. weird. any chance there are two copies of the sane
libs
installed on your machine? or maybe you built the latest
sane cvs but
only installed the sane-fujitsu.so?

allan

On 4/15/07, guus <guusmailme.ath.cx> wrote:
> Hi Allan,
>
> m. allan noah wrote:
>
> > my goodness, i should have read your email more
closely.
>
> Or I could have made myself more clear 
>
> >
> > two quick guesses- 1. are you able to scan as
root? if so, it is some
> > sort of permissions issue.
>
> I run as root, at least for testing.
>
> >
> > if not, then perhaps libusb or sanei_usb is borked
or your system.
> >
> > try (all on one line):
> >
> > SANE_DEBUG_FUJITSU=25 SANE_DEBUG_SANEI_USB=255
scanimage -d fujitsu
> > --help 2> 5650usb.log
> >
> > and then lets have a look at that log.
>
>
> Considering that fujitsu's own Windows driver does not
find the scanner
> hot-plugged, I did the unthinkable: I rebooted with the
usb connected.
> If this is a required step, it could be included in the
help texts and
> man pages, saving lots of time.
>
> Anyway, the scanner is now seen
>
>     doo:~# lsusb
>     Bus 002 Device 002: ID 04c5:10ad Fujitsu, Ltd
>     Bus 002 Device 001: ID 0000:0000
>     Bus 001 Device 001: ID 0000:0000
>
>     doo:~# sane-find-scanner -q
>     found USB scanner (vendor=0x04c5, product=0x10ad)
at libusb:002:002
>
>
> But it is not found by scanadf
>
>     doo:~# scanadf
>     scanadf: no SANE devices found
>
>
> But ok, for your test: it sort of finds the scanner . .
. but fails to
> recognize it.
> The output is below. My guess is that you now know the
cause of the problem.
>
> Cheer,
> Guus.
>
> [sanei_debug] Setting debug level of fujitsu to 25.
> [fujitsu] sane_init: start
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: SANE is built without
support for libusb
> [sanei_usb] sanei_usb_init: found 0 devices
> [fujitsu] sane_init: fujitsu backend 1.0.47, from
sane-backends 1.0.18-cvs
> [fujitsu] sane_init: finish
> [fujitsu] sane_open: start
> [fujitsu] sane_open: no scanners currently attached,
attaching
> [fujitsu] find_scanners: start
> [fujitsu] find_scanners: reading config file
fujitsu.conf
> [fujitsu] find_scanners: setting
"buffer-size" to 65536
> [fujitsu] find_scanners: looking for 'usb 0x04c5
0x1041'
> [sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x1041
> [fujitsu] find_scanners: looking for 'usb 0x04c5
0x1042'
> [sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x1042
> [fujitsu] find_scanners: looking for 'usb 0x04c5
0x10ad'
> [sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x10ad
> [fujitsu] find_scanners: found 0 scanner(s)
> [fujitsu] find_scanners: finish
> [fujitsu] sane_open: no device requested, using
default
> [fujitsu] sane_open: no device found
> scanimage: open of device fujitsu failed: Invalid
argument
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_set_debug: Setting debugging level to 255 (on)
> usb_os_find_busses: Found 002
> usb_os_find_busses: Found 001
> usb_os_find_devices: Found 002 on 002
> usb_os_find_devices: Found 001 on 002
> error obtaining child information: Inappropriate ioctl
for device
> usb_os_find_devices: Found 001 on 001
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x1606,
product=0x0010
> [sanei_usb] sanei_usb_find_devices: vendor=0x1606,
product=0x0030
> [sanei_usb] sanei_usb_find_devices: vendor=0x1606,
product=0x0130
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x1606,
product=0x0230
> [sanei_usb] sanei_usb_open: trying to open device
`/dev/usbscanner'
> [sanei_usb] sanei_usb_open: can't find device
`/dev/usbscanner' in list
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0001
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2004
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x1a20
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x1a26
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x2022
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x1a2a
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x2040
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x2060
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x207e
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x20be
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x20c0
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x20b0
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x20de
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x20f8
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x20fc
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x20fe
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a5,
product=0x2137
> [sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x0002
> [sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x0001
> [sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x2061
> [sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x2093
> [sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x2091
> [sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x2095
> [sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x2097
> [sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x208d
> [sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x20ff
> [sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x208f
> [sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x20fd
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0114
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x011f
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0121
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0122
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x080c
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x30d4
> [sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x30cf
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x40b3
> [sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x40ca
> [sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x40ff
> [sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x40b8
> [sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x40cb
> [sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x40dd
> [sanei_usb] sanei_usb_find_devices: vendor=0x05da,
product=0x40ff
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0010
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0011
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0017
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0015
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0017
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0013
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0013
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0011
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0010
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0014
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0015
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0014
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0016
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0017
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0017
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0007
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x000f
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x000f
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0005
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0014
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0012
> [sanei_usb] sanei_usb_find_devices: vendor=0x0400,
product=0x1000
> [sanei_usb] sanei_usb_find_devices: vendor=0x0400,
product=0x1001
> [sanei_usb] sanei_usb_find_devices: vendor=0x0400,
product=0x1001
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2007
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2008
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2009
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2013
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2015
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2016
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0505
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0605
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x010f
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x011d
> [sanei_usb] sanei_usb_find_devices: vendor=0x1606,
product=0x0050
> [sanei_usb] sanei_usb_find_devices: vendor=0x1606,
product=0x0060
> [sanei_usb] sanei_usb_find_devices: vendor=0x1606,
product=0x0160
> [sanei_usb] sanei_usb_find_devices: vendor=0x049f,
product=0x001a
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x2206
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x2207
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x2208
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x220d
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x220e
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x2220
> [sanei_usb] sanei_usb_find_devices: vendor=0x0a82,
product=0x6620
> [sanei_usb] sanei_usb_open: trying to open device
`auto'
> [sanei_usb] sanei_usb_open: can't find device `auto' in
list
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x1709
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x170a
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x170b
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x170c
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0xffff
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x170d
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0xffff
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x1713
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x1706
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x1707
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x1708
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x2630
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x262f
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0205
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0405
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0305
> [sanei_usb] sanei_usb_find_devices: vendor=0x047b,
product=0x1002
> [sanei_usb] sanei_usb_find_devices: vendor=0x06bd,
product=0x0100
> [sanei_usb] sanei_usb_find_devices: vendor=0x047b,
product=0x1000
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0409
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0006
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0001
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0008
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0002
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0873
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0010
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x043d,
product=0x007c
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x1005
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x1105
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0105
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x2205
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x2005
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0101
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0401
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0201
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0601
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4002
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x021e
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0218
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0219
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x021a
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x021d
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x021f
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x021c
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x021b
> [sanei_usb] sanei_usb_find_devices: vendor=0x055f,
product=0x0210
> [sanei_usb] sanei_usb_find_devices: vendor=0x043d,
product=0x002d
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0401
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0400
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0402
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0403
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0412
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0413
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3,
product=0x0422
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2011
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x201b
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2017
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x201a
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x201d
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x201f
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458,
product=0x2014
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a7,
product=0x0444
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x0461,
product=0x0377
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0901
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x2213
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x221c
> [fujitsu] sane_get_devices: start
> [fujitsu] find_scanners: start
> [fujitsu] find_scanners: reading config file
fujitsu.conf
> [fujitsu] find_scanners: setting
"buffer-size" to 65536
> [fujitsu] find_scanners: looking for 'usb 0x04c5
0x1041'
> [sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x1041
> [fujitsu] find_scanners: looking for 'usb 0x04c5
0x1042'
> [sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x1042
> [fujitsu] find_scanners: looking for 'usb 0x04c5
0x10ad'
> [sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x10ad
> [fujitsu] find_scanners: found 0 scanner(s)
> [fujitsu] find_scanners: finish
> [fujitsu] sane_get_devices: finish
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0101
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0103
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x010c
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0104
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x010b
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0106
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0109
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x010a
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0107
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x010e
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0110
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0112
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0116
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x011b
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x011c
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x011e
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0126
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0128
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0129
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x012a
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0801
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0802
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0805
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0806
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0807
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0808
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x080d
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x080e
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x080f
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0810
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0811
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0814
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0815
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0819
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0820
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8,
product=0x0000
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b0,
product=0x4000
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b0,
product=0x4001
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b0,
product=0x4002
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9,
product=0x2204
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4003
> [sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4006
> [sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4005
> [sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4007
> [sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4009
> [sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4004
> [sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4010
> [sanei_usb] sanei_usb_find_devices: vendor=0x05d8,
product=0x4011
> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: Looking for kernel scanner
devices
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No
such file or directory
> [sanei_usb] sanei_usb_init: Looking for libusb devices
> usb_os_init: Found USB VFS at /dev/bus/usb
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
> interface 0  at libusb:002:002
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks
like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a27
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a3c
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a33
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a24
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a25
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a3a
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a23
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a2a
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a2a
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a19
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a41
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a16
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a13
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a18
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a66
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a40
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a68
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a61
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a45
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0701
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0701
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0801
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0,
product=0x0b01
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x026a
> [sanei_usb] sanei_usb_find_devices: vendor=0x0686,
product=0x4004
> [sanei_usb] sanei_usb_find_devices: vendor=0x0686,
product=0x400d
> [sanei_usb] sanei_usb_find_devices: vendor=0x0686,
product=0x400e
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a15
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0a16
> [sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x1029
> [sanei_usb] sanei_usb_find_devices: vendor=0x040a,
product=0x6001
> [sanei_usb] sanei_usb_find_devices: vendor=0x040a,
product=0x6002
> [sanei_usb] sanei_usb_find_devices: vendor=0x040a,
product=0x6003
> [sanei_usb] sanei_usb_find_devices: vendor=0x040a,
product=0x6004
> [sanei_usb] sanei_usb_find_devices: vendor=0x040a,
product=0x6005
> [sanei_usb] sanei_usb_find_devices: vendor=0x0638,
product=0x0268
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a7,
product=0x0449
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a7,
product=0x044c
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a7,
product=0x0475
> [fujitsu] sane_exit: start
> [fujitsu] sane_exit: finish
> ~
>
>
>
>
>
>
>
>
>


-- 
"The truth is an offense, but not a sin"

-- 
sane-devel mailing list: sane-devellists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-d
evel
Unsubscribe: Send mail with subject "unsubscribe
your_password"
             to sane-devel-requestlists.alioth.debian.org

Oops, you are right: I unpacked the snapshot backend
sources, ran 
configure && make and only copied 
/usr/lib/sane/libsane-fujitsu.so.1 
Works ok with scsi.

What else do I need to do for usb?

Greets,
Guus.


m. allan noah wrote:

> that is really odd- first it says no libusb support,
then it later it
> does. weird. any chance there are two copies of the
sane libs
> installed on your machine? or maybe you built the
latest sane cvs but
> only installed the sane-fujitsu.so?
>
> allan
>
> On 4/15/07, guus <guusmailme.ath.cx> wrote:
>
>> Hi Allan,
>>
>> m. allan noah wrote:
>>
>> > my goodness, i should have read your email
more closely.
>>
>> Or I could have made myself more clear 
>>
>> >
>> > two quick guesses- 1. are you able to scan as
root? if so, it is some
>> > sort of permissions issue.
>>
>> I run as root, at least for testing.
>>
>> >
>> > if not, then perhaps libusb or sanei_usb is
borked or your system.
>> >
>> > try (all on one line):
>> >
>> > SANE_DEBUG_FUJITSU=25 SANE_DEBUG_SANEI_USB=255
scanimage -d fujitsu
>> > --help 2> 5650usb.log
>> >
>> > and then lets have a look at that log.
>>
>>
>> Considering that fujitsu's own Windows driver does
not find the scanner
>> hot-plugged, I did the unthinkable: I rebooted with
the usb connected.
>> If this is a required step, it could be included in
the help texts and
>> man pages, saving lots of time.
>>
>> Anyway, the scanner is now seen
>>
>>     doo:~# lsusb
>>     Bus 002 Device 002: ID 04c5:10ad Fujitsu, Ltd
>>     Bus 002 Device 001: ID 0000:0000
>>     Bus 001 Device 001: ID 0000:0000
>>
>>     doo:~# sane-find-scanner -q
>>     found USB scanner (vendor=0x04c5,
product=0x10ad) at libusb:002:002
>>
>>
>> But it is not found by scanadf
>>
>>     doo:~# scanadf
>>     scanadf: no SANE devices found
>>
>>
>> But ok, for your test: it sort of finds the scanner
. . . but fails to
>> recognize it.
>> The output is below. My guess is that you now know
the cause of the 
>> problem.
>>
>> Cheer,
>> Guus.
>>
>> [sanei_debug] Setting debug level of fujitsu to
25.
>> [fujitsu] sane_init: start
>> [sanei_debug] Setting debug level of sanei_usb to
255.
>> [sanei_usb] sanei_usb_init: Looking for kernel
scanner devices
>> [sanei_usb] sanei_usb_init: can't stat /dev/usb/:
No such file or 
>> directory
>> [sanei_usb] sanei_usb_init: SANE is built without
support for libusb
>> [sanei_usb] sanei_usb_init: found 0 devices
>> [fujitsu] sane_init: fujitsu backend 1.0.47, from
sane-backends 
>> 1.0.18-cvs
>> [fujitsu] sane_init: finish
>> [fujitsu] sane_open: start
>> [fujitsu] sane_open: no scanners currently
attached, attaching
>> [fujitsu] find_scanners: start
>> [fujitsu] find_scanners: reading config file
fujitsu.conf
>> [fujitsu] find_scanners: setting
"buffer-size" to 65536
>> [fujitsu] find_scanners: looking for 'usb 0x04c5
0x1041'
>> [sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x1041
>> [fujitsu] find_scanners: looking for 'usb 0x04c5
0x1042'
>> [sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x1042
>> [fujitsu] find_scanners: looking for 'usb 0x04c5
0x10ad'
>> [sanei_usb] sanei_usb_find_devices: vendor=0x04c5,
product=0x10ad
>> [fujitsu] find_scanners: found 0 scanner(s)
>> [fujitsu] find_scanners: finish
>> [fujitsu] sane_open: no device requested, using
default
>> [fujitsu] sane_open: no device found
>> scanimage: open of device fujitsu failed: Invalid
argument
>> [sanei_debug] Setting debug level of sanei_usb to
255.
>> [sanei_usb] sanei_usb_init: Looking for kernel
scanner devices
>> [sanei_usb] sanei_usb_init: can't stat /dev/usb/:
No such file or 
>> directory
>> [sanei_usb] sanei_usb_init: Looking for libusb
devices
>> usb_set_debug: Setting debugging level to 255 (on)
>> usb_os_find_busses: Found 002
>> usb_os_find_busses: Found 001
>> usb_os_find_devices: Found 002 on 002
>> usb_os_find_devices: Found 001 on 002
>> error obtaining child information: Inappropriate
ioctl for device
>> usb_os_find_devices: Found 001 on 001
>> [sanei_usb] sanei_usb_init: found libusb device
(0x04c5/0x10ad)
>> interface 0  at libusb:002:002
>> [sanei_usb] sanei_usb_init: device 0x0000/0x0000
looks like a root hub
>> [