Hello,
I have seen the USB1.1 implementation on opencores.org and
I'm quite
happy with it. But I have some questions if you had time,
please
answer me.
Because in my project the size of the core is more important
than
speed im trying to minimize the area of the core. As I have
seen most
impact have the FIFOs. So I wanted to implement only 8 Byte
FIFOs
instead of 64 Byte. But when I resize the FIFOs to 8 Byte
the tests
from your testbench fail because an error FIFO full is
rising.
Is this a bug, or have I forgotten to reset some other
variables?
At first I only changed the call of the FIFOs from:
generic_fifo_sc_a #(8,6,0) u10(
generic_fifo_sc_a #(8,6,0) u11(
to
generic_fifo_sc_a #(8,3,0) u10(
generic_fifo_sc_a #(8,3,0) u11(
. Then I reconfigured the descriptors in usb1_rom.v. But
this was also
not enough.
Is it basically possible to expect a payload size from 53
bytes in the
call data_in, or a wLength of 53 in the send_setup call,
with a FIFO
size of 8 Byte? I think it should work, but as told before I
get
errors. I need this for reading the configuration descriptor
or can I
read this then only in portions of 8? If yes, how can I read
in
portions of 8? If I tried always got only the first 8
bytes.
If you have no time to answer the question it would be nice
if you
only answer that you don't have time to answer the question.
;)
Thanks in advance.
Best regards,
Hannes Riedenbauer
_______________________________________________
http://
www.opencores.org/mailman/listinfo/usb
|