newbie troubles

I've been trying to connect my laptop to my linksys vpn
router with little 
success. 

I can bring up ipsec (using the Openswan rpm for Suse 10.1) 
properly (I do 
not bring up racoon). My ipsec.conf is below


version 2

config setup
    interfaces=%defaultroute
    klipsdebug=none
    plutodebug=none

conn %default
    authby=rsasig
    leftrsasigkey=
    rightrsasigkey =
    left=%defaultroute
    keyingtries=1
    #keylife=1200s
    #ikelifetime=1200s

conn meiron-office
    left=%defaultroute
    leftid = laptop.danster.com
    right=xx.xx.xx.xx
    rightsubnet=10.128.205.0/24
    authby=secret
    auto=add

There is an ipsec.secrets file that looks like

xx.xx.xx.xx %any : PSK "1234"

But when I try to initiate the tunnel I get

meiron-laptop:/etc # ipsec auto --up meiron-office
104 "meiron-office" #2: STATE_MAIN_I1: initiate
010 "meiron-office" #2: STATE_MAIN_I1:
retransmission; will wait 20s for 
response
010 "meiron-office" #2: STATE_MAIN_I1:
retransmission; will wait 40s for 
response

etc - I believed the firewall is letting the packets out but
there is no 
response from my linksys router. Anyone have experience with
the right 
settings for road warriors using linksys vpn routers?

thanks in advance - Dan





_______________________________________________
Usersopenswan.org
http
://lists.openswan.org/mailman/listinfo/users
Building and Integrating Virtual Private Networks with
Openswan: 
http://www.amazon.com/gp/product/1904811
256/104-3099591-2946327?n=283155

On Fri, 27 Oct 2006, Dan Meiron wrote:

> But when I try to initiate the tunnel I get
>
> meiron-laptop:/etc # ipsec auto --up meiron-office
> 104 "meiron-office" #2: STATE_MAIN_I1:
initiate
> 010 "meiron-office" #2: STATE_MAIN_I1:
retransmission; will wait 20s for
> response
> 010 "meiron-office" #2: STATE_MAIN_I1:
retransmission; will wait 40s for
> response
>
> etc - I believed the firewall is letting the packets
out but there is no
> response from my linksys router. Anyone have experience
with the right
> settings for road warriors using linksys vpn routers?

Not a single packet is received. There is a firewall in the
way somewhere.

Paul
_______________________________________________
Usersopenswan.org
http
://lists.openswan.org/mailman/listinfo/users
Building and Integrating Virtual Private Networks with
Openswan: 
http://www.amazon.com/gp/product/1904811
256/104-3099591-2946327?n=283155